| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Exposed dangerous method or function in Azure Confidential Ledger allows an authorized attacker to execute code over a network. |
| A security vulnerability has been detected in H3C NX15 V100R017. Affected is the function service.add of the file /api/esps of the component Web API. Such manipulation leads to exposed dangerous routine. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. |
| In apusys, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: AUTO00837766; Issue ID: MSV-6767. |
| The AI Engine WordPress plugin before 3.5.5 does not sanitize a user-supplied filename before using it to write a downloaded file, allowing authenticated users with editor-level access to write attacker-controlled bytes to an arbitrary location on the server via path traversal. |
| A reboot of the charging controller can be triggered via Modbus TCP without authentication. Therefore, when the Modbus functionality is enabled by opening the port that CharxModbusServer is listening, an unauthenticated attacker can perform a Denial-of-Service attack. |
| Vitest is a testing framework powered by Vite. From 3.0.0 until 3.2.5, 4.1.8, and 5.0.0-beta.4, Vitest Browser Mode exposed a cdp() API that forwarded raw Chrome DevTools Protocol methods without being gated by allowWrite or allowExec, allowing a remote client with exposed browser API metadata to use CDP Page.setDownloadBehavior and Runtime.evaluate to overwrite vite.config.ts and execute attacker-controlled Node.js code. This issue is fixed in versions 3.2.5, 4.1.8, and 5.0.0-beta. |
| webpack-dev-server versions 5.2.5 and earlier expose two internal developer endpoints, /webpack-dev-server/open-editor and /webpack-dev-server/invalidate, that perform state-changing actions on any GET request without verifying that the request originated from the dev server's own page. Any website a developer visits while the dev server is running can trigger these endpoints cross-origin with no interaction beyond the visit. An attacker can open an arbitrary existing local file in the developer's editor, including files outside the project root, and repeated requests can spawn editor processes and force recompilations that degrade the developer's machine. Patches: upgrade to webpack-dev-server 5.2.6. Workarounds: none. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst. |
| Penpot is an open-source design tool for design and code collaboration. Prior to 2.15.0, Penpot MCP's mcp/packages/server/src/ReplServer.ts bound the ReplServer to 0.0.0.0:4403 and exposed an unauthenticated /execute endpoint that passed the code field to PluginBridge.executePluginTask(), allowing anyone on the network to execute JavaScript on the server. This issue is fixed in version 2.15.0. |
| Microsoft Edge (Chromium-based) Spoofing Vulnerability |
| ownCloud Core is the server-side component of the file storage, synchronization, and sharing application ownCloud Classic. In versions prior to 10.15.3, the Updater on ownCloud 10 before 10.15.3 has an exposed dangerous method or function. Attackers with administrative privileges may leverage functionality to execute arbitrary code. This issue has been fixed in version 10.15.3. |
| Nx is a monorepo solution for TypeScript and polyglot codebases. From 17.0.4 until 22.7.2 and 23.0.0-beta.2, the local HTTP server started by nx graph sent Access-Control-Allow-Origin: * on every response, letting any website a developer visited read the server's responses cross-origin — including the full project graph and the output of the /help endpoint, which runs a target's configured help command. The practical impact is typically cross-origin information disclosure, but can be arbitrary command injection in rare cases. This vulnerability is fixed in 22.7.2 and 23.0.0-beta.2. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 2.1, the bundled Caddy reverse-proxy's admin API — which has no authentication by default — is bound on 0.0.0.0:2019 inside the container. While this listener is not directly published to the host by docker-compose.yml, it is reachable from the Appsmith server process itself or a SSRF vulnerability. An authenticated low-privileged user can therefore drive the SSRF to issue POST /load (or any other admin-API call) against http://0.0.0.0:2019/, fully replacing the live Caddy configuration and taking over the reverse proxy. This vulnerability is fixed in 2.1. |
| Starlette is a lightweight ASGI framework/toolkit. In versions 1.0.1 and below, when dispatching a request, HTTPEndpoint selects the handler by lowercasing the HTTP method and looking it up as an attribute with getattr, without restricting the lookup to a known set of HTTP verbs. When an HTTPEndpoint subclass is registered through Route(...) without an explicit methods= argument, the route does not constrain the method and every method reaches the endpoint. If a non-standard HTTP method whose lowercased name matches an attribute on the endpoint subclass reaches the endpoint, that attribute is invoked as if it were a request handler. An attacker can use this to reach methods that were never meant to be HTTP handlers, such as internal helpers, without the authorization checks applied by the intended public handler. An application (including Starlette-based frameworks like FastAPI) is affected if it registers an HTTPEndpoint subclass via Route(...) without explicitly setting methods=, and that subclass includes extra methods named like non-standard HTTP verbs that take one request argument and return a response. This issue has been fixed in version 1.1.0. |
| Postiz is an AI social media scheduling tool. Versions prior to 2.21.8 contained an unauthenticated endpoint that accepted a signed token and applied subscription-enforcement side effects to the organization referenced in that token's claims, without verifying the token's intended purpose. The endpoint, /public/modify-subscription, could not change the persisted subscription tier, but it did execute enforcement-related side effects on the caller's own organization, including adjusting team-member enablement state, disabling integrations exceeding the asserted plan's limits, and resetting the scheduled-post cron when the asserted plan was the free tier. Impact is limited to the attacker's own organization and cannot be redirected at other tenants through this endpoint. This issue has been fixed in version 2.21.8. |
| Nuxt is an open-source web development framework for Vue.js. In @nuxt/rspack-builder and @nuxt/webpack-builder from versions 3.15.4 to before 3.21.7 and 4.0.0 to before 4.4.7, there is an incomplete fix for GHSA-6m52-m754-pw2g. Source code may still be stolen during dev when using the webpack / rspack builder if the dev server is bound to a non-loopback address (e.g. nuxt dev --host) and the developer opens a malicious site on the same network. This issue has been patched in versions 3.21.7 and 4.4.7. |
| Nuxt is an open-source web development framework for Vue.js. In @nuxt/rspack-builder and @nuxt/webpack-builder versions 3.15.4 to before 3.21.6, and 4.0.0-alpha.1 to before 4.4.6, there is an incomplete fix for GHSA-4gf7-ff8x-hq99. Source code may be stolen during dev when using the webpack / rspack builder if the dev server is bound to a non-loopback address (e.g. nuxt dev --host) and the developer opens a malicious site on the same network. This issue has been patched in versions 3.21.6 and 4.4.6. |
| Heptabase developed by Hepta Platforms has a Exposed Dangerous Method or Function vulnerability, allowing unauthenticated remote attackers to leverage social engineering techniques to trick a victim into opening or loading a malicious webpage within the Heptabase application, thereby gaining unauthorized access to camera and microphone permissions. |
| A vulnerability was identified in the Lenovo Android Application, distributed exclusively on tablets in the Chinese market, that could allow a website visited by the built-in browser to overwrite system clipboard contents. |
| The Electron preload script in Logseq exposes an API method that allows the renderer process to invoke IPC handlers without proper path validation. An attacker with JavaScript execution in the renderer (e.g. via XSS or a malicious plugin), can read, write, or delete arbitrary files on the user's system.
While only version v0.10.15 was tested and confirmed as vulnerable, status of other versions is unknown since this issue was not addressed by a patch. |
