| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ZEBRA is a Zcash node written entirely in Rust. From zebrad versions 2.2.0 to before 4.3.1 and from zebra-rpc versions 1.0.0-beta.45 to before 6.0.2, a vulnerability in Zebra's JSON-RPC HTTP middleware allows an authenticated RPC client to cause a Zebra node to crash by disconnecting before the request body is fully received. The node treats the failure to read the HTTP request body as an unrecoverable error and aborts the process instead of returning an error response. This issue has been patched in zebrad version 4.3.1 and zebra-rpc version 6.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: prevent RCU stalls in kasan_release_vmalloc_node
When CONFIG_PAGE_OWNER is enabled, freeing KASAN shadow pages during
vmalloc cleanup triggers expensive stack unwinding that acquires RCU read
locks. Processing a large purge_list without rescheduling can cause the
task to hold CPU for extended periods (10+ seconds), leading to RCU stalls
and potential OOM conditions.
The issue manifests in purge_vmap_node() -> kasan_release_vmalloc_node()
where iterating through hundreds or thousands of vmap_area entries and
freeing their associated shadow pages causes:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P6229/1:b..l
...
task:kworker/0:17 state:R running task stack:28840 pid:6229
...
kasan_release_vmalloc_node+0x1ba/0xad0 mm/vmalloc.c:2299
purge_vmap_node+0x1ba/0xad0 mm/vmalloc.c:2299
Each call to kasan_release_vmalloc() can free many pages, and with
page_owner tracking, each free triggers save_stack() which performs stack
unwinding under RCU read lock. Without yielding, this creates an
unbounded RCU critical section.
Add periodic cond_resched() calls within the loop to allow:
- RCU grace periods to complete
- Other tasks to run
- Scheduler to preempt when needed
The fix uses need_resched() for immediate response under load, with a
batch count of 32 as a guaranteed upper bound to prevent worst-case stalls
even under light load. |
| An issue was discovered in Vanetza V2X v26.02 allowing remote unauthorized attackers to cause a denial of service. The vulnerability exists in the GeoNetworking packet processing pipeline where OpenSSL exceptions from ECC point validation (invalid compressed point, point not on curve) are not properly caught by the Router::indicate() call chain. The openssl_wrapper.cpp check() function (line 19) throws openssl::Exception when OpenSSL operations fail. The parser's catch block in parse_secured() should catch these, but the exception escapes through subsequent processing stages (indicate_common, indicate_extended). This causes std::terminate, crashing the V2X receiver. |
| An issue in Eprosima Micro-XREC-DDS Agent v.3.0.1 allows a remote attacker to cause a denial of service via a packet specially crafted to bear a non-valid value in any Boolean field. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5. |
| Insufficient parameter verification leads to the occurrence of format errors in files, which will trigger an unhandled "std::invalid_argument" exception, ultimately causing the program to terminate. |
| A vulnerability has been found in aligungr UERANSIM up to 3.2.7. The affected element is the function rls::DecodeRlsMessage in the library src/lib/rls/rls_pdu.cpp of the component Radio Link Simulation Layer. The manipulation of the argument pduLength leads to uncaught exception. The attack may be initiated remotely. Upgrading to version 3.2.8 is sufficient to fix this issue. The identifier of the patch is ca1a66fffe282767bb08618af9f848e3b68ea47b. It is suggested to upgrade the affected component. This behavior is related to CVE-2024-37877. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Add missing secure storage access fixups for donated memory
There are special cases where secure storage access exceptions happen
in a kernel context for pages that don't have the PG_arch_1 bit
set. That bit is set for non-exported guest secure storage (memory)
but is absent on storage donated to the Ultravisor since the kernel
isn't allowed to export donated pages.
Prior to this patch we would try to export the page by calling
arch_make_folio_accessible() which would instantly return since the
arch bit is absent signifying that the page was already exported and
no further action is necessary. This leads to secure storage access
exception loops which can never be resolved.
With this patch we unconditionally try to export and if that fails we
fixup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.4, the POST /config/<service>/show API endpoint accepts a configver parameter that is directly appended to a base directory path to construct a local file path, which is subsequently opened and its contents returned to the caller. The existing path traversal guard only inspects the base directory variable (which is never user-controlled) and entirely ignores the user-supplied configver value. An authenticated attacker can supply a configver value containing `../` sequences to escape the intended directory and read arbitrary files accessible to the web application process. Version 8.2.6.4 contains a patch for the issue. |
| The sort utility in uutils coreutils is vulnerable to a process panic when using the --files0-from option with inputs containing non-UTF-8 filenames. The implementation enforces UTF-8 encoding and utilizes expect(), causing an immediate crash when encountering valid but non-UTF-8 paths. This diverges from GNU sort, which treats filenames as raw bytes. A local attacker can exploit this to crash the utility and disrupt automated pipelines. |
| Apache Log4j's JsonTemplateLayout https://logging.apache.org/log4j/2.x/manual/json-template-layout.html , in versions up to and including 2.25.3, produces invalid JSON output when log events contain non-finite floating-point values (NaN, Infinity, or -Infinity), which are prohibited by RFC 8259. This may cause downstream log processing systems to reject or fail to index affected records.
An attacker can exploit this issue only if both of the following conditions are met:
* The application uses JsonTemplateLayout.
* The application logs a MapMessage containing an attacker-controlled floating-point value.
Users are advised to upgrade to Apache Log4j JSON Template Layout 2.25.4, which corrects this issue. |
| OpenDeck is Linux software for your Elgato Stream Deck. Prior to 2.8.1, the service listening on port 57118 serves static files for installed plugins but does not properly sanitize path components. By including ../ sequences in the request path, an attacker can traverse outside the intended directory and read any file OpenDeck can access. This vulnerability is fixed in 2.8.1. |
| In OCaml opam before 2.5.1, a .install field containing a destination filepath can use ../ to reach a parent directory. |
| A path traversal: '../filedir' vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8 may allow attacker to escalation of privilege via <insert attack vector here> |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a possible panic which can happen when a flags-typed component model value is lifted with the Val type. If bits are set outside of the set of flags the component model specifies that these bits should be ignored but Wasmtime will panic when this value is lifted. This panic only affects wasmtime's implementation of lifting into Val, not when using the flags! macro. This additionally only affects flags-typed values which are part of a WIT interface. This has the risk of being a guest-controlled panic within the host which Wasmtime considers a DoS vector. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, On x86-64 platforms with SSE3 disabled Wasmtime's compilation of the f64x2.splat WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but this data is not visible to WebAssembly guests. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| SiYuan is an open-source personal knowledge management system. In versions 3.6.3 and prior, the /api/av/removeUnusedAttributeView endpoint constructs a filesystem path using the user-controlled id parameter without validation or path boundary enforcement. An attacker can inject path traversal sequences such as ../ into the id value to escape the intended directory and delete arbitrary .json files on the server, including global configuration files and workspace metadata. This issue has been fixed in version 3.6.4. |
| REDAXO is a PHP-based content management system. Prior to version 5.20.2, authenticated users with backup permissions can read arbitrary files within the webroot via path traversal in the Backup addon's file export functionality. The Backup addon does not validate the `EXPDIR` POST parameter against the UI-generated allowlist of permitted directories. An attacker can supply relative paths containing `../` sequences (or even absolute paths inside the document root) to include any readable file in the generated `.tar.gz` archive. Version 5.20.2 fixes this issue. |
| eopkg is a Solus package manager implemented in python3. In versions prior to 4.4.0, a malicious package could escape the directory set by `--destdir`. This requires the installation of a package from a malicious or compromised source. Files in such packages would not be installed in the path given by `--destdir`, but on a different location on the host. The issue has been fixed in v4.4.0. Users only installing packages from the Solus repositories are not affected. |
