| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Completely fix fcport double free
In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free().
When an error happens, this function is called by qla2x00_sp_release(),
when kref_put() releases the first and the last reference.
qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport().
Doing it one more time after kref_put() is a bad idea. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: Parse DT for flashes with the rest of the DT parsing
The recent refactoring of where runtime PM is enabled done in commit
f1eb4e792bb1 ("spi: spi-cadence-quadspi: Enable pm runtime earlier to
avoid imbalance") made the fact that when we do a pm_runtime_disable()
in the error paths of probe() we can trigger a runtime disable which in
turn results in duplicate clock disables. This is particularly likely
to happen when there is missing or broken DT description for the flashes
attached to the controller.
Early on in the probe function we do a pm_runtime_get_noresume() since
the probe function leaves the device in a powered up state but in the
error path we can't assume that PM is enabled so we also manually
disable everything, including clocks. This means that when runtime PM is
active both it and the probe function release the same reference to the
main clock for the IP, triggering warnings from the clock subsystem:
[ 8.693719] clk:75:7 already disabled
[ 8.693791] WARNING: CPU: 1 PID: 185 at /usr/src/kernel/drivers/clk/clk.c:1188 clk_core_disable+0xa0/0xb
...
[ 8.694261] clk_core_disable+0xa0/0xb4 (P)
[ 8.694272] clk_disable+0x38/0x60
[ 8.694283] cqspi_probe+0x7c8/0xc5c [spi_cadence_quadspi]
[ 8.694309] platform_probe+0x5c/0xa4
Dealing with this issue properly is complicated by the fact that we
don't know if runtime PM is active so can't tell if it will disable the
clocks or not. We can, however, sidestep the issue for the flash
descriptions by moving their parsing to when we parse the controller
properties which also save us doing a bunch of setup which can never be
used so let's do that. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix double destroy_workqueue on service rescan PCI path
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix double free in ulpi_register_interface() error path
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface(). |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix double free related to rereg_user_mr
If IB_MR_REREG_TRANS is set during rereg_user_mr, the
umem will be released and a new one will be allocated
in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans
fails after the new umem is allocated, it releases the umem,
but does not set iwmr->region to NULL. The problem is that
this failure is propagated to the user, who will then call
ibv_dereg_mr (as they should). Then, the dereg_mr path will
see a non-NULL umem and attempt to call ib_umem_release again.
Fix this by setting iwmr->region to NULL after ib_umem_release.
Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
} |
| In the Linux kernel, the following vulnerability has been resolved:
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
When __auxiliary_device_add() fails, reset_add_gpio_aux_device()
calls auxiliary_device_uninit(adev).
The device release callback reset_gpio_aux_device_release() frees
adev, but the current error path then calls kfree(adev) again,
causing a double free.
Keep kfree(adev) for the auxiliary_device_init() failure path, but
avoid freeing adev after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: possible double-free of cctx->remote_heap
fastrpc_init_create_static_process() may free cctx->remote_heap on the
err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove()
frees cctx->remote_heap again if it is non-NULL, which can lead to a
double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg
device is subsequently removed/unbound.
Clear cctx->remote_heap after freeing it in the error path to prevent the
later cleanup from freeing it again.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: hv: Fix double ida_free in hv_pci_probe error path
If hv_pci_probe() fails after storing the domain number in
hbus->bridge->domain_nr, there is a call to free this domain_nr via
pci_bus_release_emul_domain_nr(), however, during cleanup, the bridge
release callback pci_release_host_bridge_dev() also frees the domain_nr
causing ida_free to be called on same ID twice and triggering following
warning:
ida_free called for id=28971 which is not allocated.
WARNING: lib/idr.c:594 at ida_free+0xdf/0x160, CPU#0: kworker/0:2/198
Call Trace:
pci_bus_release_emul_domain_nr+0x17/0x20
pci_release_host_bridge_dev+0x4b/0x60
device_release+0x3b/0xa0
kobject_put+0x8e/0x220
devm_pci_alloc_host_bridge_release+0xe/0x20
devres_release_all+0x9a/0xd0
device_unbind_cleanup+0x12/0xa0
really_probe+0x1c5/0x3f0
vmbus_add_channel_work+0x135/0x1a0
Fix this by letting pci core handle the free domain_nr and remove
the explicit free called in pci-hyperv driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: pruss: Fix double free in pruss_clk_mux_setup()
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: only publish mode_data after clone setup
iptfs_clone_state() stores x->mode_data before allocating the reorder
window. If that allocation fails, the code frees the cloned state and
returns -ENOMEM, leaving x->mode_data pointing at freed memory.
The xfrm clone unwind later runs destroy_state() through x->mode_data,
so the failed clone path tears down IPTFS state that clone_state()
already freed.
Keep the cloned IPTFS state private until all allocations succeed so
failed clones leave x->mode_data unset. The destroy path already
handles a NULL mode_data pointer. |
| Double Free and possible RCE vulnerability in Apache HTTP Server with the HTTP/2 protocol.
This issue affects Apache HTTP Server: 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list()
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush()
smbd_send_batch_flush() already calls smbd_free_send_io(),
so we should not call it again after smbd_post_send()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix double free of WoL irq
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: meson-spicc: Fix double-put in remove path
meson_spicc_probe() registers the controller with
devm_spi_register_controller(), so teardown already drops the
controller reference via devm cleanup.
Calling spi_controller_put() again in meson_spicc_remove()
causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe()
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put. |
