| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Make Safe-RET robust against interrupt injection
An attacker injecting interrupts while the Safe-RET mitigation executes
on machines affected by SRSO can neutralize the safe return sequence,
potentially leading to data leakage through speculative execution.
Fixup register state as if the Safe-RET sequence executed successfully
by "emulating" it, in a manner of speaking, and avoid executing a RET
instruction after returning from the interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix fils_discovery double free on alloc failure
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix NVM tag length underflow in TLV parser
In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is
"while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed
int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a
size_t (12), so "length" is converted to size_t and any firmware-supplied
"length" < 12 makes the subtraction wrap to a huge value. The loop body
then reads a 12-byte struct tlv_type_nvm past the end of the short
vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it).
Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both
operands are non-negative, so it no longer underflows and a "length" too
small for one record correctly skips the loop.
BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421)
Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52
Workqueue: hci0 hci_power_on
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617)
qca_uart_setup (drivers/bluetooth/btqca.c:948)
qca_setup (drivers/bluetooth/hci_qca.c:2029)
hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438)
hci_dev_open_sync (net/bluetooth/hci_sync.c:5227)
hci_power_on (net/bluetooth/hci_core.c:920)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: initialize extack in nh_res_bucket_migrate()
nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to
call_nexthop_res_bucket_notifiers(). When
nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns
-ENOMEM), the error is propagated back before any notifier sets
extack._msg, and the error path formats the stale pointer with
pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE
this dereferences uninitialized stack memory:
Oops: general protection fault, probably for non-canonical address ...
KASAN: maybe wild-memory-access in range [...]
RIP: 0010:string (lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
_printk (kernel/printk/printk.c:2504)
nh_res_bucket_migrate (net/ipv4/nexthop.c:1816)
nh_res_table_upkeep (net/ipv4/nexthop.c:1866)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
Kernel panic - not syncing: Fatal exception
Zero-initialize extack so _msg is NULL on error paths that never set it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: tcp: fix double sock release on batch realloc
bpf_iter_tcp_batch() releases the current batch via
bpf_iter_tcp_put_batch(), which drops the socket refs and rewrites
each slot with the socket cookie, then grows the batch. cur_sk/end_sk
are kept for bpf_iter_tcp_resume(), but on realloc failure the function
returns ERR_PTR() before resume runs, leaving cur_sk < end_sk over
slots that now hold cookies rather than sock pointers.
bpf_iter_tcp_seq_stop() then calls bpf_iter_tcp_put_batch() again and
dereferences a cookie as a struct sock.
Empty the batch on the failure path so stop() does not release it
again. The sockets were already freed by the first
bpf_iter_tcp_put_batch(), so nothing leaks, and a later read() rescans
the bucket from the start instead of skipping it. The sibling
GFP_NOWAIT failure path still holds real socket references and is left
for stop() to release.
BUG: KASAN: null-ptr-deref in __sock_gen_cookie
Read of size 8 at addr 0000000000000059 by task exploit
...
__sock_gen_cookie (net/core/sock_diag.c:28)
bpf_iter_tcp_put_batch (net/ipv4/tcp_ipv4.c:2918)
bpf_iter_tcp_seq_stop (net/ipv4/tcp_ipv4.c:3270)
bpf_seq_read (kernel/bpf/bpf_iter.c:205)
vfs_read (fs/read_write.c:572)
ksys_read (fs/read_write.c:716)
do_syscall_64
entry_SYSCALL_64_after_hwframe
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: check skb_pull_data() return in gtp1u_send_echo_resp()
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix a use-after-free problem in rxe_mmap
rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list
and releases pending_lock while the struct's kref is still at 1:
list_del_init(&ip->pending_mmaps);
spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */
ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */
[...]
rxe_vma_open(vma); /* kref_get, ref → 2 */
remap_vmalloc_range_partial() walks PTEs without any lock.
A concurrent DESTROY_CQ ioctl on another CPU calls:
kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1→0 */
vfree(ip->obj) /* clears vmalloc PTEs mid-walk */
kfree(ip) /* frees rxe_mmap_info */
This yields:
1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the
per-PTE race -> vm_insert_page(NULL) → GPF in validate_page_before_insert
2. Page UAF, vmalloc_to_page() reads a stale PTE before vfree clears
it. User VMA holds a PTE to a free'd page which might eventually get
reallocated later by vmalloc which allows the attacker to get a clean
page-level UAF.
It is worth noting that even though a page-level UAF is possible given
the strong primitive, it is statistically very difficult to achieve
given the very short time window (after the last insert_page and before
the kref_get).
The call trace are as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 1000 PID: 413 Comm: poc Not tainted 7.0.0-rc5-dirty #28 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:validate_page_before_insert+0x32/0x300
Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 e8 93 b5 a3 ff 48 8d 7b 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 7b 02 00 00 4c 8b 63 08 31 ff 4d 89 e5 41 83 e5
RSP: 0018:ffff88811b15f2f0 EFLAGS: 00000202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008
RBP: ffff88811b15f318 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881181eee00
R13: 0000000000000000 R14: ffff8881181eee00 R15: ffff8881181eee20
FS: 00007b1e000f76c0(0000) GS:ffff8884268e0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007b1e00a24ac0 CR3: 0000000116eb3000 CR4: 00000000000006f0
Call Trace:
<TASK>
insert_page+0x8f/0x190
? __pfx_insert_page+0x10/0x10
? kasan_save_alloc_info+0x38/0x60
vm_insert_page+0x2e7/0x400
remap_vmalloc_range_partial+0x212/0x3e0
remap_vmalloc_range+0x6e/0xb0
? __kasan_check_write+0x14/0x30
rxe_mmap+0x2e9/0x5d0
ib_uverbs_mmap+0x1ad/0x2c0
__mmap_region+0x12c2/0x2ad0
? __pfx___mmap_region+0x10/0x10
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_prev_slot+0x360/0x39c0
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_next_slot+0x1e5b/0x2f40
? __sanitizer_cov_trace_cmp8+0x18/0x30
? unmapped_area_topdown+0x4dd/0x610
? kfree+0x1b1/0x440
? free_cpumask_var+0x16/0x30
? __kasan_slab_free+0x7d/0xa0
? __sanitizer_cov_trace_cmp8+0x18/0x30
mmap_region+0x2e6/0x3c0
do_mmap+0xa3e/0x12a0
? __pfx_do_mmap+0x10/0x10
? __kasan_check_write+0x14/0x30
? down_write_killable+0xba/0x160
? __pfx_down_write_killable+0x10/0x10
? __sanitizer_cov_trace_cmp4+0x16/0x30
vm_mmap_pgoff+0x2d4/0x4a0
? __pfx_vm_mmap_pgoff+0x10/0x10
? fget+0x1bf/0x270
ksys_mmap_pgoff+0x40c/0x690
? __sanitizer_cov_trace_const_cmp4+0x16/0x30
? __pfx_ksys_mmap_pgoff+0x10/0x10
? __kasan_check_write+0x14/0x30
? _raw_spin_trylock+0xbb/0x130
? __pfx__raw_spin_trylock+0x10/0x10
__x64_sys_mmap+0x135/0x1e0
x64_sys_c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
When iptfs_skb_add_frags() copies frag references from the source
frag walk into a new SKB, it increments the page reference count via
__skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the
destination SKB's skb_shinfo->flags.
If the source SKB carries shared frags (e.g. from a page-pool backed
receive path), the new inner SKB will appear to ESP as having privately
owned frags. A subsequent esp_input() call for a nested transport-mode
SA then takes the no-COW fast path and decrypts in place, writing over
pages that are still referenced by the outer IPTFS SKB. This causes
kernel-visible memory corruption and can trigger a panic.
All other frag-transfer helpers in the kernel (skb_try_coalesce,
skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly
propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this
convention by setting the flag inside the loop immediately after
__skb_frag_ref() and nr_frags++, so every exit path that attaches a frag
unconditionally propagates SKBFL_SHARED_FRAG. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: tear down new links on vif update error path
When ieee80211_vif_update_links() adds new links it allocates a link
container for each and calls ieee80211_link_init() (which registers the
per-link debugfs files with file->private_data pointing into the container)
and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails,
the error path restores the old pointers and jumps to 'free', which frees
the new containers but never removes their debugfs entries or stops the
links. The debugfs files survive with file->private_data dangling at the
freed container, so a later open()+read() (e.g. link-1/txpower)
dereferences freed memory in ieee80211_if_read_link(), a use-after-free.
The removal path already dismantles links correctly via
ieee80211_tear_down_links(), which removes each link's keys and debugfs
entries and calls ieee80211_link_stop(); the add path on the error branch
does not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in error
path") hardened this same error path for the link-removal case
(new_links == 0) but left the newly-added links' teardown unaddressed.
drv_change_vif_links() can fail at runtime on MLO drivers (internal
allocation / queue / firmware command failures).
Remove the new links' debugfs entries and stop them before freeing.
BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
Read of size 8 at addr ffff888011290000 by task exploit/145
Call Trace:
...
ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
short_proxy_read (fs/debugfs/file.c:373)
vfs_read (fs/read_write.c:572)
ksys_read (fs/read_write.c:716)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a
RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: free fib_alias with kfree_rcu() on insert error path
fib_table_insert() publishes new_fa into the leaf's fa_list with
fib_insert_alias() before calling the fib entry notifiers. When a
notifier fails, the error path removes new_fa with fib_remove_alias()
(hlist_del_rcu) and frees it right away with kmem_cache_free().
fib_table_lookup() walks that list under rcu_read_lock() only, so a
concurrent lookup that already reached new_fa keeps reading it after the
free:
BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601)
Read of size 1 at addr ffff88810676d4eb by task exploit/297
Call Trace:
fib_table_lookup (net/ipv4/fib_trie.c:1601)
ip_route_output_key_hash_rcu (net/ipv4/route.c:2814)
ip_route_output_key_hash (net/ipv4/route.c:2705)
__ip4_datagram_connect (net/ipv4/datagram.c:49)
udp_connect (net/ipv4/udp.c:2144)
__sys_connect (net/socket.c:2167)
__x64_sys_connect (net/socket.c:2173)
do_syscall_64
entry_SYSCALL_64_after_hwframe
which belongs to the cache ip_fib_alias of size 56
Triggering the error path needs CAP_NET_ADMIN and a registered fib
notifier that can reject a route; a netdevsim device whose IPv4 FIB
resource is exhausted is enough.
Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already
does for a fib_alias removed from the trie. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert
loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or
fail. But its guard is inverted: it skips policies with prefixlen <
threshold and preallocates for the rest.
prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and
the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the
loop preallocates for the exact policies (which never allocate) and skips
the inexact ones, whose bin/node is then allocated GFP_ATOMIC during
reinsert. On failure the error path only WARN_ONCE()s and continues,
leaving a poisoned bydst node; the next rebuild's hlist_del_rcu()
dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure,
deterministic via failslab.
Invert the guard so preallocation covers exactly the reinserted policies;
the reinsert then allocates nothing and cannot fail.
Crash:
Oops: general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead...]
...
Workqueue: events xfrm_hash_rebuild
RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190
RAX: dead000000000122 (LIST_POISON2 + offset)
...
Call Trace:
hlist_del_rcu (include/linux/rculist.h:599)
xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: intel-hid: Protect ACPI notify handler against recursion
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-hid notify_handler() may
run on multiple CPU cores racing with themselves.
On convertibles and detachables (matched by DMI chassis-type 31 and 32 in
dmi_auto_add_switch[]) the SW_TABLET_MODE input device is registered
lazily from notify_handler() on the first tablet-mode event, via
intel_hid_switches_setup(). When two such events race on different CPUs
both can pass the !priv->switches check and register the priv->switches
input device twice, resulting in a duplicate sysfs entry and a subsequent
NULL pointer dereference.
This is the same class of bug fixed by commit e075c3b13a0a ("platform/x86:
intel-vbtn: Protect ACPI notify handler against recursion") for the
sibling intel-vbtn driver.
Protect intel-hid notify_handler() from racing with itself with a mutex
to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()
hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it
to run 2 ms later:
INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup);
schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2));
cfg_setup() dereferences drvdata.hdev to issue MCU command requests.
hid_go_cfg_remove() tears down sysfs and stops the HID device, but
never drains the delayed work. If the device is unbound within the
2 ms scheduling delay (a probe failure rolling back via remove, or a
fast rmmod after probe), the work fires after hid_destroy_device()
has dropped its reference and released the underlying hdev struct,
leaving cfg_setup() with a stale drvdata.hdev pointer.
Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove()
already calls cancel_delayed_work_sync() on its analogous work, and
drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel
must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup()
acquires that mutex; reversing the order would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: drain bus_reset work on device removal
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe
should not see interrupt delivery in the usual case. However, hardware may
still present stale or latched interrupt status left by firmware or the
bootloader.
If probe later unwinds after devm_request_irq() has installed the handler,
such a stale interrupt can still reach arc_emac_intr() during teardown and
race with release of the associated net_device.
Avoid that window by putting the device into a known quiescent state before
requesting the IRQ: disable all EMAC interrupt sources and clear any
pending EMAC interrupt status bits. This keeps the change hardware-focused
and minimal, while preventing spurious IRQ delivery from leftover state. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning
When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM
driver (e.g. amdgpu for video playback in GNOME Videos / Showtime)
triggers a spurious warning:
DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \
overlapping mappings aren't supported
WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0
The call chain is:
amdgpu_cs_ioctl
-> amdgpu_ttm_backend_bind
-> dma_buf_map_attachment
-> [udmabuf] map_udmabuf -> get_sg_table
-> dma_map_sgtable(dev, sg, direction, 0) // attrs=0
-> debug_dma_map_sg -> add_dma_entry -> EEXIST
This happens because udmabuf builds a per-page scatter-gather list via
sg_set_folio(). When begin_cpu_udmabuf() has already created an sg
table mapped for the misc device, and an importer such as amdgpu maps
the same pages for its own device via map_udmabuf(), the DMA debug
infrastructure sees two active mappings whose physical addresses share
cacheline boundaries and warns about the overlap.
The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in
add_dma_entry() because it signals that no CPU cache maintenance is
performed at map/unmap time, making the cacheline overlap harmless.
All other major dma-buf exporters already pass this flag:
- drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC
- amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC
The CPU sync at map/unmap time is also redundant for udmabuf:
begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit
cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU
access is requested through the dma-buf interface.
Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and
dma_unmap_sgtable() in udmabuf to suppress the spurious warning and
skip the redundant sync. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid WARNING in sva unbind path
The Intel IOMMU driver allows SVA on devices even if they do not support
PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when
PRI is supported") modified the SVA bind path to allow this configuration
by skipping IOPF enablement when PRI is missing. However, it failed to
update the unbind path.
This creates an imbalance: the unbind path attempts to disable IOPF for
a device that never had it enabled, triggering a WARNING in
intel_iommu_disable_iopf():
WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d
Call Trace:
<TASK>
blocking_domain_set_dev_pasid+0x50/0x70
iommu_detach_device_pasid+0x89/0xc0
iommu_sva_unbind_device+0x73/0x150
xe_vm_close_and_put+0x4d2/0x1200 [xe]
Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware
in both the bind and unbind paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.
Remove the redundant usb_anchor_urb() from the resubmit path. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix data races on ring->ready
On weakly-ordered architectures, the store to fiq->ops can be
reordered past the store to ring->ready, allowing a CPU that sees
ring->ready == true via fuse_uring_ready() to dispatch requests
through a stale fiq->ops pointer. Upgrade the store to
smp_store_release() and the load in fuse_uring_ready() to
smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...)
is visible to any CPU that observes ring->ready == true.
Additionally, fuse_uring_do_register() publishes ring->ready with
WRITE_ONCE() but the fast-path check reads it with a plain load.
This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in
READ_ONCE() to mark it without adding unnecessary ordering.
Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to
prevent the compiler from reloading it between the NULL check and the
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
