| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| go-redis is the official Redis client library for the Go programming language. Prior to 9.5.5, 9.6.3, and 9.7.2, go-redis potentially responds out of order when `CLIENT SETINFO` times out during connection establishment. This can happen when the client is configured to transmit its identity, there are network connectivity issues, or the client was configured with aggressive timeouts. The problem occurs for multiple use cases. For sticky connections, you receive persistent out-of-order responses for the lifetime of the connection. All commands in the pipeline receive incorrect responses. When used with the default ConnPool once a connection is returned after use with ConnPool#Put the read buffer will be checked and the connection will be marked as bad due to the unread data. This means that at most one out-of-order response before the connection is discarded. This issue is fixed in 9.5.5, 9.6.3, and 9.7.2; however, 9.7.2 has been yanked and 9.7.3 is the lowest available patched version on the 9.7.x branch. As a workaround, set the flag `DisableIndentity` to `true` when constructing the client instance. |
| A weakness has been identified in RightNow-AI OpenFang up to 0.6.9. This vulnerability affects the function shell_exec of the file crates/openfang-runtime/src/tool_runner.rs. This manipulation causes uncontrolled memory allocation. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: reject duplicate leaves in GROUP request
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Carry over frag counter
The gmac_rx() NAPI poll function assembles packets in an
SKB from a ring buffer.
If the ring buffer gets completely emptied during a poll cycle,
we exit gmac_rx(), but the packet is not yet completely
assembled in the SKB, yet the fragment counter frag_nr is
reset to zero on the next invocation.
Solve this by making the RX fragment counter a part of the
port struct, and carry it over between invocations.
Reset the fragment counter only right after calling
napi_gro_frags(), on error (after calling napi_free_frags())
or if stopping the port.
Reset it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Make RX SKB per-port
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_folio() to wait on writeback
Fix netfs_read_folio() to wait for an ongoing writeback to complete so that
it can trust the dirty flag and whatever is attached to folio->private
(folio->private may get cleaned up by the collector before it clears the
writeback flag). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio->private handling in netfs_perform_write()
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section". |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early put of sink folio in netfs_read_gaps()
Fix netfs_read_gaps() to release the sink page it uses after waiting for
the request to complete. The way the sink page is used is that an
ITER_BVEC-class iterator is created that has the gaps from the target folio
at either end, but has the sink page tiled over the middle so that a single
read op can fill in both gaps.
The bug was found by KASAN detecting a UAF on the generic/075 xfstest in
the cifsd kernel thread that handles reception of data from the TCP socket:
BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20
Write of size 885 at addr ffff888107f92000 by task cifsd/1285
CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy)
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x17f/0x4f1
kasan_report+0x100/0x1e0
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x48a/0xa20
__skb_datagram_iter+0x2c9/0x430
skb_copy_datagram_iter+0x6e/0x160
tcp_recvmsg_locked+0xce0/0x1130
tcp_recvmsg+0xeb/0x300
inet_recvmsg+0xcf/0x3a0
sock_recvmsg+0xea/0x100
cifs_readv_from_socket+0x3a6/0x4d0 [cifs]
cifs_read_iter_from_socket+0xdd/0x130 [cifs]
cifs_readv_receive+0xaad/0xb10 [cifs]
cifs_demultiplex_thread+0x1148/0x1740 [cifs]
kthread+0x1cf/0x210 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential deadlock in write-through mode
Fix netfs_advance_writethrough() to always unlock the supplied folio and to
mark it dirty if it isn't yet written to the end. Unfortunately, it can't
be marked for writeback until the folio is done with as that may cause a
deadlock against mmapped reads and writes.
Even though it has been marked dirty, premature writeback can't occur as
the caller is holding both inode->i_rwsem (which will prevent concurrent
truncation, fallocation, DIO and other writes) and ictx->wb_lock (which
will cause flushing to wait and writeback to skip or wait).
Note that this may be easier to deal with once the queuing of folios is
split from the generation of subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix streaming write being overwritten
In order to avoid reading whilst writing, netfslib will allow "streaming
writes" in which dirty data is stored directly into folios without reading
them first. Such folios are marked dirty but may not be marked uptodate.
If a folio is entirely written by a streaming write, uptodate will be set,
otherwise it will have a netfs_folio struct attached to ->private recording
the dirty region.
In the event that a partially written streaming write page is to be
overwritten entirely by a single write(), netfs_perform_write() will try to
copy over it, but doesn't discard the netfs_folio if it succeeds; further,
it doesn't correctly handle a partial copy that overwrites some of the
dirty data.
Fix this by the following:
(1) If the folio is successfully overwritten, free the netfs_folio struct
before marking the page uptodate.
(2) If the copy to the folio partially fails, but short of the dirty data,
just ignore the copy.
(3) If the copy partially fails and overwrites some of the dirty data,
accept the copy, update the netfs_folio struct to record the new data.
If the folio is now filled, free the netfs_folio and set uptodate,
otherwise return a partial write.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0 0x927c0
write 0x63fb8 0x53c8 0
copy_range 0xb704 0x19b9 0x24429 0x79380
write 0x2402b 0x144a2 0x90660 *
write 0x204d5 0x140a0 0x927c0 *
copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 *
read 0x00000 0x20000 0x9157c
read 0x20000 0x20000 0x9157c
read 0x40000 0x20000 0x9157c
read 0x60000 0x20000 0x9157c
read 0x7e1a0 0xcfb9 0x9157c
on cifs with the default cache option.
It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in
netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: respect peer refcount in CMD_NEW_PEER error path
ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly
rather than ovpn_peer_put(), bypassing the kref. The accompanying
comment ("peer was not yet hashed, thus it is not used in any context")
holds for UDP but not for TCP.
For UDP, the ovpn_socket union uses the .ovpn arm and never points back
at a peer; UDP encap_recv looks up peers via the not-yet-populated
hashtables, so the new peer is unreachable until ovpn_peer_add()
publishes it.
For TCP, ovpn_socket_new() sets ovpn_sock->peer and
ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().
From that moment until ovpn_socket_release() detaches in the error path,
the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll
on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can
reach the peer through sk_user_data -> ovpn_sock->peer and bump its
refcount via ovpn_peer_hold().
ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())
drains strparser and the tx work, but does not synchronize with
userspace syscall callers that already hold a peer reference. If
ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such
a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in
__skb_recv_datagram() on peer->tcp.user_queue - the direct
ovpn_peer_release() destroys the peer while the caller still holds
the reference, and the eventual ovpn_peer_put() from that caller
operates on freed memory.
Replace the direct destructor call with ovpn_peer_put() so the kref
correctly defers destruction until the last reference is dropped.
In the common case where no concurrent user is present, behaviour is
unchanged: the kref hits zero immediately and ovpn_peer_release_kref()
runs the same destructor.
With this conversion ovpn_peer_release() has no callers outside peer.c
- ovpn_peer_release_kref() in the same translation unit is the only
remaining user - so make it static and drop its declaration from
peer.h. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - use cached peer pointer in ovpn_tcp_close()
ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data()
under rcu_read_lock(), takes a reference on sock->peer, caches the peer
pointer in a local, and drops the read lock. It then passes sock->peer
(rather than the cached local) to ovpn_peer_del(), re-dereferencing the
ovpn_socket after the RCU read section has ended.
Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use
after unlock" pattern but is protected by lock_sock() held across the
function, ovpn_tcp_close() runs without the socket lock: inet_release()
invokes sk_prot->close() without taking lock_sock first.
ovpn_socket_release() can therefore complete its kref_put -> detach ->
synchronize_rcu -> kfree(sock) sequence concurrently, in the window
after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences
sock->peer. The synchronize_rcu() in ovpn_socket_release() protects
readers that use the dereferenced pointer inside the RCU read section,
not those that escape the pointer to a local and use it afterwards.
A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp -
don't deref NULL sk_socket member after tcp_close()"): trigger a peer
removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same
moment userspace closes the TCP fd. That commit fixed the detach-side
of the same race window; this one fixes the close-side at a different
victim.
Tighten the entry block to read sock->peer exactly once into the cached
peer local, and route all subsequent uses (the hold check, the
ovpn_peer_del() call, and the prot->close() invocation) through that
local. sock->peer is only ever written once in ovpn_socket_new() under
lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket,
and is never reassigned afterwards - but the previous multi-read pattern
made that invariant implicit rather than explicit. The same multi-read
shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(),
ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned
up via a dedicated helper in a follow-up net-next series. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: prevent chain-after-chain in plain text SG
Sashiko points out that if end = 0 (start != 0) the current
code will create a chain link to content type right after
the wrap link:
This would create a chain where the wrap link points directly
to another chain link. The scatterlist API sg_next iterator
does not recursively resolve consecutive chain links.
meaning this is illegal input to crypto.
The wrapping link is unnecessary if end = 0. end is the entry after
the last one used so end = 0 means there's nothing pushed after
the wrap:
end start i
v v v
[ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]
Skip the wrapping in this case.
TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.
This avoids the chain-after-chain.
Move the wrap chaining before marking END and chaining off content
type, that feels like more logical ordering to me, but should not
matter from functional perspective. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
sg_chain(&msg_pl->sg.data[msg_pl->sg.start],
MAX_SKB_FRAGS - msg_pl->sg.start + 1,
msg_pl->sg.data);
This places the chain pointer at
sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. =
&data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 =
data[start + (MAX_SKB_FRAGS - start + 1) - 1] =
data[MAX_SKB_FRAGS]
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx
Before a5xx Adreno driver will not try fetching UBWC params (because
those generations didn't support UBWC anyway), however it's still
possible to query UBWC-related params from the userspace, triggering
possible NULL pointer dereference. Check for UBWC config in
adreno_get_param() and return sane defaults if there is none.
Patchwork: https://patchwork.freedesktop.org/patch/717778/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: don't mix devm and drmm functions
Mixing devm and drmm functions will result in a use-after-free on msm
driver teardown if userspace keeps a reference on the drm device:
The WB connector data will be destroyed because of the use of
devm_kzalloc()), while the usersoace still can try interacting with the
WB connector (which uses drmm_ functions).
Change dpu_writeback_init() to use drmm_.
Patchwork: https://patchwork.freedesktop.org/patch/722656/ |
