| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it. |
| Hono is a Web application framework that provides support for any JavaScript runtime. In versions prior to 4.9.7, a flaw in the `bodyLimit` middleware could allow bypassing the configured request body size limit when conflicting HTTP headers were present. The middleware previously prioritized the `Content-Length` header even when a `Transfer-Encoding: chunked` header was also included. According to the HTTP specification, `Content-Length` must be ignored in such cases. This discrepancy could allow oversized request bodies to bypass the configured limit. Most standards-compliant runtimes and reverse proxies may reject such malformed requests with `400 Bad Request`, so the practical impact depends on the runtime and deployment environment. If body size limits are used as a safeguard against large or malicious requests, this flaw could allow attackers to send oversized request bodies. The primary risk is denial of service (DoS) due to excessive memory or CPU consumption when handling very large requests. The implementation has been updated to align with the HTTP specification, ensuring that `Transfer-Encoding` takes precedence over `Content-Length`. The issue is fixed in Hono v4.9.7, and all users should upgrade immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: ca8210: Stop leaking skb's
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.
Free the skb structure upon error before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| A vulnerability was found in D-Link DI-8400 16.07.26A1. It has been classified as problematic. This affects an unknown part of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument share_enable leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in JasPer up to 4.2.5. Affected by this vulnerability is the function jas_image_chclrspc of the file src/libjasper/base/jas_image.c of the component Image Color Space Conversion Handler. The manipulation leads to null pointer dereference. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The identifier of the patch is bb7d62bd0a2a8e0e1fdb4d603f3305f955158c52. It is recommended to apply a patch to fix this issue. |
| A weakness has been identified in SpyShelter up to 15.4.0.1015. Affected is an unknown function in the library SpyShelter.sys of the component IOCTL Handler. This manipulation causes denial of service. The attack needs to be launched locally. The exploit has been made available to the public and could be exploited. Upgrading to version 15.4.0.1028 is able to address this issue. It is advisable to upgrade the affected component. |
| Vulnerability in SK Hynix DDR5 on x86 allows a local attacker to trigger Rowhammer bit flips impacting the Hardware Integrity and the system's security. This issue affects DDR5: DIMMs produced from 2021-1 until 2024-12. |
| An issue was discovered in phpseclib 1.x before 1.0.23, 2.x before 2.0.47, and 3.x before 3.0.36. An attacker can construct a malformed certificate containing an extremely large prime to cause a denial of service (CPU consumption for an isPrime primality check). NOTE: this issue was introduced when attempting to fix CVE-2023-27560. |
| An issue was discovered in phpseclib 1.x before 1.0.23, 2.x before 2.0.47, and 3.x before 3.0.36. When processing the ASN.1 object identifier of a certificate, a sub identifier may be provided that leads to a denial of service (CPU consumption for decodeOID). |
| A vulnerability was determined in NASM Netwide Assember 2.17rc0. This vulnerability affects the function parse_smacro_template of the file preproc.c. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. |
| A security flaw has been discovered in ckolivas lrzip up to 0.651. This impacts the function __GI_____strtol_l_internal of the file strtol_l.c. Performing manipulation results in null pointer dereference. The attack is only possible with local access. The exploit has been released to the public and may be exploited. |
| When reading a specially crafted JPEG file, metadata-extractor up to 2.16.0 can be made to allocate large amounts of memory that finally leads to an out-of-memory error even for very small inputs. This could be used to mount a denial of service attack against services that use metadata-extractor library. |
| Copyparty is a portable file server. Versions prior to 1.18.9, the filter parameter for the "Recent Uploads" page allows arbitrary RegExes. If this feature is enabled (which is the default), an attacker can craft a filter which deadlocks the server. This is fixed in version 1.18.9. |
| A vulnerability, which was classified as problematic, was found in Axiomatic Bento4 up to 1.6.0-641. Affected is the function AP4_DataBuffer::SetDataSize of the file Mp4Decrypt.cpp of the component mp4decrypt. The manipulation leads to allocation of resources. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
| A vulnerability has been found in yarnpkg Yarn up to 1.22.22. This impacts the function setOptions of the file src/util/request-manager.js. Such manipulation leads to inefficient regular expression complexity. Local access is required to approach this attack. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability in the Address Resolution Protocol (ARP) implementation of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to trigger a broadcast storm, leading to a denial of service (DoS) condition on an affected device.
This vulnerability is due to how Cisco IOS XR Software processes a high, sustained rate of ARP traffic hitting the management interface. Under certain conditions, an attacker could exploit this vulnerability by sending an excessive amount of traffic to the management interface of an affected device, overwhelming its ARP processing capabilities. A successful exploit could result in degraded device performance, loss of management connectivity, and complete unresponsiveness of the system, leading to a DoS condition. |
| A vulnerability classified as problematic was found in libtiff 4.6.0. This vulnerability affects the function PS_Lvl2page of the file tools/tiff2ps.c of the component tiff2ps. The manipulation leads to null pointer dereference. It is possible to launch the attack on the local host. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The name of the patch is 6ba36f159fd396ad11bf6b7874554197736ecc8b. It is recommended to apply a patch to fix this issue. One of the maintainers explains, that "[t]his error only occurs if DEFER_STRILE_LOAD (defer-strile-load:BOOL=ON) or TIFFOpen( .. "rD") option is used." |
| Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 was discovered to manage users' sessions system wide instead of an account-by-account basis, potentially leading to a Denial of Service (DoS) via resource exhaustion. NOTE: the Supplier reports that the system-wide limit is intentional. |
| An issue in the component /settings/localisation of Akaunting v3.1.18 allows authenticated attackers to cause a Denial of Service (DoS) via a crafted POST request. |
