| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cb
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
veth0_macvtap: entered promiscuous mode
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
__kasan_check_byte+0x12/0x40
lock_acquire+0x79/0x2e0
lock_sock_nested+0x48/0x100
? l2cap_sock_ready_cb+0x46/0x160
l2cap_sock_ready_cb+0x46/0x160
l2cap_conn_start+0x779/0xff0
? __pfx_l2cap_conn_start+0x10/0x10
? l2cap_info_timeout+0x60/0xa0
? __pfx___mutex_lock+0x10/0x10
l2cap_info_timeout+0x68/0xa0
? process_scheduled_works+0xa8d/0x18c0
process_scheduled_works+0xb6e/0x18c0
? __pfx_process_scheduled_works+0x10/0x10
? assign_work+0x3d5/0x5e0
worker_thread+0xa53/0xfc0
kthread+0x388/0x470
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x51e/0xb90
? __pfx_ret_from_fork+0x10/0x10
veth1_macvtap: entered promiscuous mode
? __switch_to+0xc7d/0x1450
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
batman_adv: batadv0: Interface activated: batadv_slave_0
batman_adv: batadv0: Interface activated: batadv_slave_1
netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
ieee80211 phy39: Selected rate control algorithm 'minstrel_ht'
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix use of completion ctx after free
On admin queue completion handling, if the admin command completed with
error we print data from the completion context. The issue is that we
already freed the completion context in polling/interrupts handler which
means we print data from context in an unknown state (it might be
already used again).
Change the admin submission flow so alloc/dealloc of the context will be
symmetric and dealloc will be called after any potential use of the
context. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: use netlink policy range checks
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0
A malicious USB device with the TASCAM US-144MKII device id can have a
configuration containing bInterfaceNumber=1 but no interface 0. USB
configuration descriptors are not required to assign interface numbers
sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will
then be dereferenced directly.
Fix this up by checking the return value properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash. |
| In the Linux kernel, the following vulnerability has been resolved:
bnge: return after auxiliary_device_uninit() in error path
When auxiliary_device_add() fails, the error block calls
auxiliary_device_uninit() but does not return. The uninit drops the
last reference and synchronously runs bnge_aux_dev_release(), which sets
bd->auxr_dev = NULL and frees the underlying object. The subsequent
bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a
good thing to have happen when trying to clean up from an error.
Add the missing return, as the auxiliary bus documentation states is a
requirement (seems that LLM tools read documentation better than humans
do...) |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: clamp report_size in s32ton() to avoid undefined shift
s32ton() shifts by n-1 where n is the field's report_size, a value that
comes directly from a HID device. The HID parser bounds report_size
only to <= 256, so a broken HID device can supply a report descriptor
with a wide field that triggers shift exponents up to 256 on a 32-bit
type when an output report is built via hid_output_field() or
hid_set_field().
Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in
hid_report_raw_event") added the same n > 32 clamp to the function
snto32(), but s32ton() was never given the same fix as I guess syzbot
hadn't figured out how to fuzz a device the same way.
Fix this up by just clamping the max value of n, just like snto32()
does. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: fix use-after-free of CPPI descriptor in RX path
cppi5_hdesc_get_psdata() returns a pointer into the CPPI descriptor.
In both emac_rx_packet() and emac_rx_packet_zc(), the descriptor is
freed via k3_cppi_desc_pool_free() before the psdata pointer is used
by emac_rx_timestamp(), which dereferences psdata[0] and psdata[1].
This constitutes a use-after-free on every received packet that goes
through the timestamp path.
Defer the descriptor free until after all accesses through the psdata
pointer are complete. For emac_rx_packet(), move the free into the
requeue label so both early-exit and success paths free the descriptor
after all accesses are done. For emac_rx_packet_zc(), move the free to
the end of the loop body after emac_dispatch_skb_zc() (which calls
emac_rx_timestamp()) has returned. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Scrub r12 register on kernel entry
Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Fix use-after-free in migration restore
When an error is returned from xe_sriov_pf_migration_restore_produce(),
the data pointer is not set to NULL, which can trigger use-after-free
in subsequent .write() calls.
Set the pointer to NULL upon error to fix the problem.
(cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Harden depth calculation functions
An issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size.
This can cause integer overflow and truncation of SQ/RQ/SRQ depth
returning a success when it should have failed.
Harden the functions to do all depth calculations and boundary
checking in u64 sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.
WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641] unregister_netdev+0x1c/0x30
[ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739] idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769] pci_device_remove+0xab/0x1e0
[ 3707.563786] device_release_driver_internal+0x371/0x530
[ 3707.563803] driver_detach+0xbf/0x180
[ 3707.563816] bus_remove_driver+0x11b/0x2a0
[ 3707.563829] pci_unregister_driver+0x2a/0x250
Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.
Add local variables for idx, vport_config and netdev for readability. |
