| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: scarlett2: Fix buffer overflow in config retrieval
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Tahoe 26.3, iOS 18.7.5 and iPadOS 18.7.5, visionOS 26.3, iOS 26.3 and iPadOS 26.3, Safari 26.3. Processing maliciously crafted web content may lead to an unexpected process crash. |
| The issue was addressed with improved memory handling. This issue is fixed in tvOS 26.1, watchOS 26.1, macOS Tahoe 26.1, iOS 26.1 and iPadOS 26.1, Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, visionOS 26.1. Processing maliciously crafted web content may lead to memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid mapping wrong physical block for swapfile
Xiaolong Guo reported a f2fs bug in bugzilla [1]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220951
Quoted:
"When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+,
the system experiences data corruption leading to either:
1 dm-verity corruption errors and device reboot
2 F2FS node corruption errors and boot hangs
The issue occurs specifically when:
1 Using F2FS filesystem (ext4 is unaffected)
2 Swapfile size is less than F2FS section size (2MB)
3 Swapfile has fragmented physical layout (multiple non-contiguous extents)
4 Kernel version is 6.6+ (6.1 is unaffected)
The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the
first extent of a small swapfile (< 2MB) is not aligned to section boundaries,
the function incorrectly treats it as the last extent, failing to map
subsequent extents. This results in incorrect swap_extent creation where only
the first extent is mapped, causing subsequent swap writes to overwrite wrong
physical locations (other files' data).
Steps to Reproduce
1 Setup a device with F2FS-formatted userdata partition
2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng
3 Run swap stress test: (Android devices)
adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60
--swap 0"
Log:
1 Ftrace shows in kernel 6.6, only first extent is mapped during second
f2fs_map_blocks call in check_swap_activate():
stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start
blkaddr=0x43143, len=0x1
(Only 4KB mapped, not the full swapfile)
2 in kernel 6.1, both extents are correctly mapped:
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start
blkaddr=0x13cd4, len=0x1
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start
blkaddr=0x60c84b, len=0xff
The problematic code is in check_swap_activate():
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
nr_pblocks % blks_per_sec ||
!f2fs_valid_pinned_area(sbi, pblock)) {
bool last_extent = false;
not_aligned++;
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
if (cur_lblock + nr_pblocks > sis->max)
nr_pblocks -= blks_per_sec;
/* this extent is last one */
if (!nr_pblocks) {
nr_pblocks = last_lblock - cur_lblock;
last_extent = true;
}
ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks);
if (ret) {
if (ret == -ENOENT)
ret = -EINVAL;
goto out;
}
if (!last_extent)
goto retry;
}
When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec)
exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The
code then incorrectly assumes this is the last extent, sets nr_pblocks =
last_lblock - cur_lblock (entire swapfile), and performs migration. After
migration, it doesn't retry mapping, so subsequent extents are never processed.
"
In order to fix this issue, we need to lookup block mapping info after
we migrate all blocks in the tail of swapfile. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
When simple_write_to_buffer() succeeds, it returns the number of bytes
actually copied to the buffer. The code incorrectly uses 'count'
as the index for null termination instead of the actual bytes copied.
If count exceeds the buffer size, this leads to out-of-bounds write.
Add a check for the count and use the return value as the index.
The bug was validated using a demo module that mirrors the original
code and was tested under QEMU.
Pattern of the bug:
- A fixed 64-byte stack buffer is filled using count.
- If count > 64, the code still does buf[count] = '\0', causing an
- out-of-bounds write on the stack.
Steps for reproduce:
- Opens the device node.
- Writes 128 bytes of A to it.
- This overflows the 64-byte stack buffer and KASAN reports the OOB.
Found via static analysis. This is similar to the
commit da9374819eb3 ("iio: backend: fix out-of-bound write") |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: fix memory corruption with too many bridges
Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.
Patchwork: https://patchwork.freedesktop.org/patch/502664/ |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds stream writes by validating *pos
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned. |
| The rtsock_msg_buffer() function serializes routing information into a buffer. As a part of this, it copies sockaddr structures into a sockaddr_storage structure on the stack. It assumes that the source sockaddr length field had already been validated, but this is not necessarily the case, and it's possible for a malicious userspace program to craft a request which triggers a 127-byte overflow.
In practice, this overflow immediately overwrites the canary for the rtsock_msg_buffer() stack frame, resulting in a panic once the function returns.
The bug allows an unprivileged user to crash the kernel by triggering a stack buffer overflow in rtsock_msg_buffer(). In particular, the overflow will corrupt a stack canary value that is verified when the function returns; this mitigates the impact of the stack overflow by triggering a kernel panic.
Other kernel bugs may exist which allow userspace to find the canary value and thus defeat the mitigation, at which point local privilege escalation may be possible. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-Write has been detected in the function gst_parse_vorbis_setup_packet within vorbis_parse.c. The integer size is read from the input file without proper validation. As a result, size can exceed the fixed size of the pad->vorbis_mode_sizes array (which size is 256). When this happens, the for loop overwrites the entire pad structure with 0s and 1s, affecting adjacent memory as well. This OOB-write can overwrite up to 380 bytes of memory beyond the boundaries of the pad->vorbis_mode_sizes array. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer before 1.18.4 might cause heap corruption when parsing certain malformed Matroska files. |
| GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10. |
| GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596. |
| GStreamer before 1.16.0 has a heap-based buffer overflow in the RTSP connection parser via a crafted response from a server, potentially allowing remote code execution. |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of tile list data within AV1-encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22873. |
| The ROM mappings in the NSF decoder in gstreamer 0.10.x allow remote attackers to cause a denial of service (out-of-bounds read or write) and possibly execute arbitrary code via a crafted NSF music file. |
| DOS / potential heap overwrite in qtdemux using zlib decompression. Integer overflow in qtdemux element in qtdemux_inflate function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite. |
| GStreamer SRT File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of SRT subtitle files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20968. |
