| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: efifb: Register sysfs groups through driver core
The driver core can register and cleanup sysfs groups already.
Make use of that functionality to simplify the error handling and
cleanup.
Also avoid a UAF race during unregistering where the sysctl attributes
were usable after the info struct was freed. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
In the svc_i3c_master_probe function, &master->hj_work is bound with
svc_i3c_master_hj_work, &master->ibi_work is bound with
svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the
hj_work, svc_i3c_master_irq_handler can start the ibi_work.
If we remove the module which will call svc_i3c_master_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
CPU0 CPU1
| svc_i3c_master_hj_work
svc_i3c_master_remove |
i3c_master_unregister(&master->base)|
device_unregister(&master->dev) |
device_release |
//free master->base |
| i3c_master_do_daa(&master->base)
| //use master->base
Fix it by ensuring that the work is canceled before proceeding with the
cleanup in svc_i3c_master_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: wait for fixup workers before stopping cleaner kthread during umount
During unmount, at close_ctree(), we have the following steps in this order:
1) Park the cleaner kthread - this doesn't destroy the kthread, it basically
halts its execution (wake ups against it work but do nothing);
2) We stop the cleaner kthread - this results in freeing the respective
struct task_struct;
3) We call btrfs_stop_all_workers() which waits for any jobs running in all
the work queues and then free the work queues.
Syzbot reported a case where a fixup worker resulted in a crash when doing
a delayed iput on its inode while attempting to wake up the cleaner at
btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread
was already freed. This can happen during unmount because we don't wait
for any fixup workers still running before we call kthread_stop() against
the cleaner kthread, which stops and free all its resources.
Fix this by waiting for any fixup workers at close_ctree() before we call
kthread_stop() against the cleaner and run pending delayed iputs.
The stack traces reported by syzbot were the following:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-fixup btrfs_work_helper
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
__lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154
btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842
btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 2:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:319 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
kasan_slab_alloc include/linux/kasan.h:247 [inline]
slab_post_alloc_hook mm/slub.c:4086 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1107
copy_process+0x5d1/0x3d50 kernel/fork.c:2206
kernel_clone+0x223/0x880 kernel/fork.c:2787
kernel_thread+0x1bc/0x240 kernel/fork.c:2849
create_kthread kernel/kthread.c:412 [inline]
kthreadd+0x60d/0x810 kernel/kthread.c:765
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 61:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:230 [inline]
slab_free_h
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix race between timeout and normal completion
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: iaa - Fix potential use after free bug
The free_device_compression_mode(iaa_device, device_mode) function frees
"device_mode" but it iss passed to iaa_compression_modes[i]->free() a few
lines later resulting in a use after free.
The good news is that, so far as I can tell, nothing implements the
->free() function and the use after free happens in dead code. But, with
this fix, when something does implement it, we'll be ready. :) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - inject error before stopping queue
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible UAF for bfqq->bic with merge chain
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_requeue_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0x10d/0x610 mm/kasan/report.c:475
kasan_report+0x8e/0xc0 mm/kasan/report.c:588
bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757
bfq_init_rq block/bfq-iosched.c:6876 [inline]
bfq_insert_request block/bfq-iosched.c:6254 [inline]
bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304
blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593
blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
</TASK>
Allocated by task 20776:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3458 [inline]
kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503
ioc_create_icq block/blk-ioc.c:370 [inline]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
The call trace is as below:
[ 125.350876][ T1430] Call Trace:
[ 125.356281][ T1430] <TASK>
[ 125.361285][ T1430] ? __warn (kernel/panic.c:693)
[ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219)
[ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239)
[ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
[ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970)
[ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151)
[ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm
[ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910)
[ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
[ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161)
[ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm
[ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma
[ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma
[ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231)
[ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393)
[ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339)
[ 125.531837][ T1430] kthread (kernel/kthread.c:389)
[ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147)
[ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
[ 125.566487][ T1430] </TASK>
[ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/client: add missing bo locking in show_meminfo()
bo_meminfo() wants to inspect bo state like tt and the ttm resource,
however this state can change at any point leading to stuff like NPD and
UAF, if the bo lock is not held. Grab the bo lock when calling
bo_meminfo(), ensuring we drop any spinlocks first. In the case of
object_idr we now also need to hold a ref.
v2 (MattB)
- Also add xe_bo_assert_held()
(cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: Fix uaf in __timer_delete_sync
There are two paths to access mptcp_pm_del_add_timer, result in a race
condition:
CPU1 CPU2
==== ====
net_rx_action
napi_poll netlink_sendmsg
__napi_poll netlink_unicast
process_backlog netlink_unicast_kernel
__netif_receive_skb genl_rcv
__netif_receive_skb_one_core netlink_rcv_skb
NF_HOOK genl_rcv_msg
ip_local_deliver_finish genl_family_rcv_msg
ip_protocol_deliver_rcu genl_family_rcv_msg_doit
tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit
tcp_v4_do_rcv mptcp_nl_remove_addrs_list
tcp_rcv_established mptcp_pm_remove_addrs_and_subflows
tcp_data_queue remove_anno_list_by_saddr
mptcp_incoming_options mptcp_pm_del_add_timer
mptcp_pm_del_add_timer kfree(entry)
In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).
Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".
Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info
The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the
routine unconditionally frees submitted mailbox commands regardless of
return status. The issue is that for MBX_TIMEOUT cases, when firmware
returns SFP information at a later time, that same mailbox memory region
references previously freed memory in its cmpl routine.
Fix by adding checks for the MBX_TIMEOUT return code. During mailbox
resource cleanup, check the mbox flag to make sure that the wait did not
timeout. If the MBOX_WAKE flag is not set, then do not free the resources
because it will be freed when firmware completes the mailbox at a later
time in its cmpl routine.
Also, increase the timeout from 30 to 60 seconds to accommodate boot
scripts requiring longer timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap: Fix use-after-free error in kunit test
This is a clear use-after-free error. We remove it, and rely on checking
the return code of vcap_del_rule. |
| In the Linux kernel, the following vulnerability has been resolved:
libfs: fix get_stashed_dentry()
get_stashed_dentry() tries to optimistically retrieve a stashed dentry
from a provided location. It needs to ensure to hold rcu lock before it
dereference the stashed location to prevent UAF issues. Use
rcu_dereference() instead of READ_ONCE() it's effectively equivalent
with some lockdep bells and whistles and it communicates clearly that
this expects rcu protection. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double put of @cfile in smb2_set_path_size()
If smb2_compound_op() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() before retrying it
as the reference of @cfile was already dropped by previous call.
This fixes the following KASAN splat when running fstests generic/013
against Windows Server 2022:
CIFS: Attempting to mount //w22-fs0/scratch
run fstests generic/013 at 2024-09-02 19:48:59
==================================================================
BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200
Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176
CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40
04/01/2014
Workqueue: cifsoplockd cifs_oplock_break [cifs]
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? detach_if_pending+0xab/0x200
print_report+0x156/0x4d9
? detach_if_pending+0xab/0x200
? __virt_addr_valid+0x145/0x300
? __phys_addr+0x46/0x90
? detach_if_pending+0xab/0x200
kasan_report+0xda/0x110
? detach_if_pending+0xab/0x200
detach_if_pending+0xab/0x200
timer_delete+0x96/0xe0
? __pfx_timer_delete+0x10/0x10
? rcu_is_watching+0x20/0x50
try_to_grab_pending+0x46/0x3b0
__cancel_work+0x89/0x1b0
? __pfx___cancel_work+0x10/0x10
? kasan_save_track+0x14/0x30
cifs_close_deferred_file+0x110/0x2c0 [cifs]
? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs]
? __pfx_down_read+0x10/0x10
cifs_oplock_break+0x4c1/0xa50 [cifs]
? __pfx_cifs_oplock_break+0x10/0x10 [cifs]
? lock_is_held_type+0x85/0xf0
? mark_held_locks+0x1a/0x90
process_one_work+0x4c6/0x9f0
? find_held_lock+0x8a/0xa0
? __pfx_process_one_work+0x10/0x10
? lock_acquired+0x220/0x550
? __list_add_valid_or_report+0x37/0x100
worker_thread+0x2e4/0x570
? __kthread_parkme+0xd1/0xf0
? __pfx_worker_thread+0x10/0x10
kthread+0x17f/0x1c0
? kthread+0xda/0x1c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 1118:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
cifs_new_fileinfo+0xc8/0x9d0 [cifs]
cifs_atomic_open+0x467/0x770 [cifs]
lookup_open.isra.0+0x665/0x8b0
path_openat+0x4c3/0x1380
do_filp_open+0x167/0x270
do_sys_openat2+0x129/0x160
__x64_sys_creat+0xad/0xe0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 83:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
poison_slab_object+0xe9/0x160
__kasan_slab_free+0x32/0x50
kfree+0xf2/0x300
process_one_work+0x4c6/0x9f0
worker_thread+0x2e4/0x570
kthread+0x17f/0x1c0
ret_from_fork+0x31/0x60
ret_from_fork_asm+0x1a/0x30
Last potentially related work creation:
kasan_save_stack+0x30/0x50
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x29/0xe0
__queue_work+0x5ea/0x760
queue_work_on+0x6d/0x90
_cifsFileInfo_put+0x3f6/0x770 [cifs]
smb2_compound_op+0x911/0x3940 [cifs]
smb2_set_path_size+0x228/0x270 [cifs]
cifs_set_file_size+0x197/0x460 [cifs]
cifs_setattr+0xd9c/0x14b0 [cifs]
notify_change+0x4e3/0x740
do_truncate+0xfa/0x180
vfs_truncate+0x195/0x200
__x64_sys_truncate+0x109/0x150
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix missing cleanup on rollforward recovery error
In an error injection test of a routine for mount-time recovery, KASAN
found a use-after-free bug.
It turned out that if data recovery was performed using partial logs
created by dsync writes, but an error occurred before starting the log
writer to create a recovered checkpoint, the inodes whose data had been
recovered were left in the ns_dirty_files list of the nilfs object and
were not freed.
Fix this issue by cleaning up inodes that have read the recovery data if
the recovery routine fails midway before the log writer starts. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: Remove proc entry when dev is unregistered.
syzkaller reported a warning in bcm_connect() below. [0]
The repro calls connect() to vxcan1, removes vxcan1, and calls
connect() with ifindex == 0.
Calling connect() for a BCM socket allocates a proc entry.
Then, bcm_sk(sk)->bound is set to 1 to prevent further connect().
However, removing the bound device resets bcm_sk(sk)->bound to 0
in bcm_notify().
The 2nd connect() tries to allocate a proc entry with the same
name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the
original proc entry.
Since the proc entry is available only for connect()ed sockets,
let's clean up the entry when the bound netdev is unregistered.
[0]:
proc_dir_entry 'can-bcm/2456' already registered
WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375
Modules linked in:
CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375
Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48
RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246
RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0
R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec
FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220
bcm_connect+0x472/0x840 net/can/bcm.c:1673
__sys_connect_file net/socket.c:2049 [inline]
__sys_connect+0x5d2/0x690 net/socket.c:2066
__do_sys_connect net/socket.c:2076 [inline]
__se_sys_connect net/socket.c:2073 [inline]
__x64_sys_connect+0x8f/0x100 net/socket.c:2073
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fbd708b0e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d
RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040
R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098
R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000
</TASK>
remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' |
| In the Linux kernel, the following vulnerability has been resolved:
xen: privcmd: Fix possible access to a freed kirqfd instance
Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and
privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd
created and added to the irqfds_list by privcmd_irqfd_assign() may get
removed by another thread executing privcmd_irqfd_deassign(), while the
former is still using it after dropping the locks.
This can lead to a situation where an already freed kirqfd instance may
be accessed and cause kernel oops.
Use SRCU locking to prevent the same, as is done for the KVM
implementation for irqfds. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double put of @cfile in smb2_rename_path()
If smb2_set_path_attr() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() again as the
reference of @cfile was already dropped by previous smb2_compound_op()
call. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the descriptors as first nodes were not
removed from the list. |
