| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libp2p is a JavaScript Implementation of libp2p networking stack. Prior to version 16.2.6, an unauthenticated remote peer can exhaust the disk storage of any @libp2p/kad-dht node running in server mode by sending an unbounded stream of PUT_VALUE messages whose keys bypass all content validation. No credentials, no prior relationship, and no protocol deviation beyond a crafted key are required. The victim node's datastore fills until the host disk is exhausted, making the node unavailable. This issue has been patched in version 16.2.6. |
| Dulwich is a pure-Python implementation of the Git file formats and protocols. Starting in version 0.1.0 and prior to version 1.2.5, a client with push access could push a tiny crafted thin pack (~174 bytes) whose delta header declares a huge dest_size. When dulwich ingested it via add_thin_pack / apply_delta, it would allocate hundreds of MB of memory based on that attacker-controlled size, with no relationship to the actual bytes received. Operators running a Dulwich-based Git server that exposes git-receive-pack (i.e. accepts pushes) - for example via dulwich.server functionality, the HTTP smart server, or anything built on ReceivePackHandler - are impacted. The issue is patched in 1.2.5. add_thin_pack now accepts a max_input_size keyword (bytes; 0/None = unlimited, matching git's semantics), and ReceivePackHandler reads receive.maxInputSize from the repository config and passes it through. Wire reads are counted and a PackInputTooLarge exception is raised once the cap is exceeded - equivalent to git index-pack --max-input-size. Users should upgrade to Dulwich 1.2.5 or later and set receive.maxInputSize in their server's repository config to a sane bound for their environment. On unpatched versions, receive.maxInputSize has no effect, so it cannot be used as a workaround. Until upgrading, operators should restrict dulwich-receive-pack (push) access to trusted, authenticated clients only, or disable it entirely on servers that only need to serve fetches and/or run the server under an OS-level memory limit (e.g. ulimit, cgroups/MemoryMax, or a container memory limit) so a malicious push is killed rather than taking down the host. |
| libp2p is a JavaScript Implementation of libp2p networking stack. Prior to version 15.0.23, three cooperating omissions in @libp2p/gossipsub allow an unauthenticated single peer to exhaust the Node.js heap of any gossipsub node with default options. This issue has been patched in version 15.0.23. |
| Kanidm is an identity management platform. Prior to version 1.9.3, a single unauthenticated GET to any /scim/v1/... endpoint with a ?filter= query string of a few thousand nested parentheses (≈ 4–12 KB) drives the recursive-descent PEG parser past the worker thread's stack guard page. Rust responds to stack overflow with std::process::abort() — the entire kanidmd process exits. The parse runs inside axum's Query<ScimEntryGetQuery> extractor, before any handler body and therefore before any ACL check. This issue has been patched in version 1.9.3. |
| Boxlite is a sandbox service that allows users to create lightweight virtual machines (Boxes) and launch OCI containers within them to run untrusted code. In versions 0.8.2 and prior, Boxlite allows users to configure a timeout for services running inside the virtual machine. When the timeout is triggered, Boxlite sends a signal to kill the process. However, instead of using the uncatchable SIGKILL signal, Boxlite uses the catchable SIGALRM signal. Malicious code running inside the sandbox can exploit this vulnerability to continue running after the timeout is triggered, leading to resource exhaustion within the virtual machine and affecting the availability of the Boxlite service. This issue has been patched via commit 28159fc. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: fix vector context allocation leak
When the second kzalloc (host_context.vector.datap) fails in
kvm_riscv_vcpu_alloc_vector_context, the first allocation
(guest_context.vector.datap) is leaked. Free it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
The hdr variable is allocated on the stack and only hdr.version and
hdr.flags are initialized explicitly. Because the struct papr_hvpipe_hdr
contains reserved padding bytes (reserved[3] and reserved2[40]), these
could leak the uninitialized bytes to userspace after copy_to_user().
This patch fixes that by initializing the whole struct to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
Sashiko points out that mlx4_srq_alloc() was not undone during error
unwind, add the missing call to mlx4_srq_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix empty payload in tap skb for non-linear buffers
For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.
Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().
While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail. |
| Version 3.0.7 of the Securly Chrome Extension uses deprecated SHA-1 hashing for IWF CSAM URL matching (25,020 hashes) and CIPA blocklist matching (12,352 hashes). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device name memory leak
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name. |
| A vulnerability was determined in sgl-project SGLang up to 0.5.11. Affected by this vulnerability is the function data_hash of the component Cache Handler. This manipulation causes denial of service. The attack is restricted to local execution. A high degree of complexity is needed for the attack. The exploitation appears to be difficult. The exploit has been publicly disclosed and may be utilized. The pull request to fix this issue awaits acceptance. |
| Uncontrolled resource consumption in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| A flaw was found in GnuTLS. This vulnerability allows a denial of service (DoS) by excessive CPU (Central Processing Unit) and memory consumption via specially crafted malicious certificates containing a large number of name constraints and subject alternative names (SANs). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51) |
| Uncontrolled resource consumption in HTTP/2 allows an unauthorized attacker to deny service over a network. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.1, mod_verto's WebSocket frame loop intercepts a #-prefixed speed-test protocol (#SPU / #SPB / #SPE) before any authentication check. The declared payload size in #SPU was parsed with atoi() and only rejected non-positive values, so an unauthenticated peer could request up to INT_MAX bytes. The server then wrote roughly size * 10 bytes back during the download phase, on the order of 20 GB per request, yielding strong outbound bandwidth amplification from a short request. This issue has been patched in version 1.11.1. |
