| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment().
syzbot triggered various splats (see [0] and links) by a crafted GSO
packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols:
ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP
NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner
protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls
skb_mac_gso_segment() to invoke inner protocol GSO handlers.
nsh_gso_segment() does the following for the original skb before
calling skb_mac_gso_segment()
1. reset skb->network_header
2. save the original skb->{mac_heaeder,mac_len} in a local variable
3. pull the NSH header
4. resets skb->mac_header
5. set up skb->mac_len and skb->protocol for the inner protocol.
and does the following for the segmented skb
6. set ntohs(ETH_P_NSH) to skb->protocol
7. push the NSH header
8. restore skb->mac_header
9. set skb->mac_header + mac_len to skb->network_header
10. restore skb->mac_len
There are two problems in 6-7 and 8-9.
(a)
After 6 & 7, skb->data points to the NSH header, so the outer header
(ETH_P_8021AD in this case) is stripped when skb is sent out of netdev.
Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH),
skb_pull() in the first nsh_gso_segment() will make skb->data point
to the middle of the outer NSH or Ethernet header because the Ethernet
header is not pulled by the second nsh_gso_segment().
(b)
While restoring skb->{mac_header,network_header} in 8 & 9,
nsh_gso_segment() does not assume that the data in the linear
buffer is shifted.
However, udp6_ufo_fragment() could shift the data and change
skb->mac_header accordingly as demonstrated by syzbot.
If this happens, even the restored skb->mac_header points to
the middle of the outer header.
It seems nsh_gso_segment() has never worked with outer headers so far.
At the end of nsh_gso_segment(), the outer header must be restored for
the segmented skb, instead of the NSH header.
To do that, let's calculate the outer header position relatively from
the inner header and set skb->{data,mac_header,protocol} properly.
[0]:
BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222
__netdev_start_xmit include/linux/netdevice.h:4989 [inline]
netdev_start_xmit include/linux/netdevice.h:5003 [inline]
xmit_one net/core/dev.c:3547 [inline]
dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563
__dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3819 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
__do_kmalloc_node mm/slub.c:3980 [inline]
__kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
__
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: reject skb_copy(_expand) for fraglist GSO skbs
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment. |
| A flaw was found in libxslt where the attribute type, atype, flags are modified in a way that corrupts internal memory management. When XSLT functions, such as the key() process, result in tree fragments, this corruption prevents the proper cleanup of ID attributes. As a result, the system may access freed memory, causing crashes or enabling attackers to trigger heap corruption. |
| A flaw was found in X.Org Server Overlay Window. A Use-After-Free may lead to local privilege escalation. If a client explicitly destroys the compositor overlay window (aka COW), the Xserver would leave a dangling pointer to that window in the CompScreen structure, which will trigger a use-after-free later. |
| A heap-buffer-overflow (off-by-one) flaw was found in the GnuTLS software in the template parsing logic within the certtool utility. When it reads certain settings from a template file, it allows an attacker to cause an out-of-bounds (OOB) NULL pointer write, resulting in memory corruption and a denial-of-service (DoS) that could potentially crash the system. |
| A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure.
This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior. |
| A NULL pointer dereference flaw was found in the GnuTLS software in _gnutls_figure_common_ciphersuite(). |
| A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the "certtool --verify-chain" command. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix uninit-value access in __ip_make_skb()
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
Bug report and analysis from Ding Hui.
During iSCSI session logout, if another task accesses the shost ipaddress
attr, we can get a KASAN UAF report like this:
[ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0
[ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088
[ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3
[ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[ 276.944470] Call Trace:
[ 276.944943] <TASK>
[ 276.945397] dump_stack_lvl+0x34/0x48
[ 276.945887] print_address_description.constprop.0+0x86/0x1e7
[ 276.946421] print_report+0x36/0x4f
[ 276.947358] kasan_report+0xad/0x130
[ 276.948234] kasan_check_range+0x35/0x1c0
[ 276.948674] _raw_spin_lock_bh+0x78/0xe0
[ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp]
[ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi]
[ 276.952185] dev_attr_show+0x3f/0x80
[ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0
[ 276.953401] seq_read_iter+0x402/0x1020
[ 276.954260] vfs_read+0x532/0x7b0
[ 276.955113] ksys_read+0xed/0x1c0
[ 276.955952] do_syscall_64+0x38/0x90
[ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 276.956769] RIP: 0033:0x7f5d3a679222
[ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222
[ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003
[ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000
[ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000
[ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58
[ 276.960536] </TASK>
[ 276.961357] Allocated by task 2209:
[ 276.961756] kasan_save_stack+0x1e/0x40
[ 276.962170] kasan_set_track+0x21/0x30
[ 276.962557] __kasan_kmalloc+0x7e/0x90
[ 276.962923] __kmalloc+0x5b/0x140
[ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi]
[ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi]
[ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp]
[ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi]
[ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi]
[ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[ 276.965546] netlink_unicast+0x4d5/0x7b0
[ 276.965905] netlink_sendmsg+0x78d/0xc30
[ 276.966236] sock_sendmsg+0xe5/0x120
[ 276.966576] ____sys_sendmsg+0x5fe/0x860
[ 276.966923] ___sys_sendmsg+0xe0/0x170
[ 276.967300] __sys_sendmsg+0xc8/0x170
[ 276.967666] do_syscall_64+0x38/0x90
[ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 276.968773] Freed by task 2209:
[ 276.969111] kasan_save_stack+0x1e/0x40
[ 276.969449] kasan_set_track+0x21/0x30
[ 276.969789] kasan_save_free_info+0x2a/0x50
[ 276.970146] __kasan_slab_free+0x106/0x190
[ 276.970470] __kmem_cache_free+0x133/0x270
[ 276.970816] device_release+0x98/0x210
[ 276.971145] kobject_cleanup+0x101/0x360
[ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi]
[ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp]
[ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi]
[ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[ 276.972808] netlink_unicast+0x4d5/0x7b0
[ 276.973201] netlink_sendmsg+0x78d/0xc30
[ 276.973544] sock_sendmsg+0xe5/0x120
[ 276.973864] ____sys_sendmsg+0x5fe/0x860
[ 276.974248] ___sys_
---truncated--- |
| A flaw was found in xfig. This vulnerability allows possible code execution via local input manipulation via bezier_spline function. |
| A flaw was found in WebKitGTK. This vulnerability allows remote, user-assisted information disclosure that can reveal any file the user is permitted to read via abusing the file drag-and-drop mechanism where WebKitGTK does not verify that drag operations originate from outside the browser. |
| Git is a revision control system. Prior to versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4, an attacker can prepare a local repository in such a way that, when cloned, will execute arbitrary code during the operation. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. As a workaround, avoid cloning repositories from untrusted sources. |
| Git is a revision control system. Prior to versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4, local clones may end up hardlinking files into the target repository's object database when source and target repository reside on the same disk. If the source repository is owned by a different user, then those hardlinked files may be rewritten at any point in time by the untrusted user. Cloning local repositories will cause Git to either copy or hardlink files of the source repository into the target repository. This significantly speeds up such local clones compared to doing a "proper" clone and saves both disk space and compute time. When cloning a repository located on the same disk that is owned by a different user than the current user we also end up creating such hardlinks. These files will continue to be owned and controlled by the potentially-untrusted user and can be rewritten by them at will in the future. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. |
| urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3's proxy support, it's possible to accidentally configure the `Proxy-Authorization` header even though it won't have any effect as the request is not using a forwarding proxy or a tunneling proxy. In those cases, urllib3 doesn't treat the `Proxy-Authorization` HTTP header as one carrying authentication material and thus doesn't strip the header on cross-origin redirects. Because this is a highly unlikely scenario, we believe the severity of this vulnerability is low for almost all users. Out of an abundance of caution urllib3 will automatically strip the `Proxy-Authorization` header during cross-origin redirects to avoid the small chance that users are doing this on accident. Users should use urllib3's proxy support or disable automatic redirects to achieve safe processing of the `Proxy-Authorization` header, but we still decided to strip the header by default in order to further protect users who aren't using the correct approach. We believe the number of usages affected by this advisory is low. It requires all of the following to be true to be exploited: 1. Setting the `Proxy-Authorization` header without using urllib3's built-in proxy support. 2. Not disabling HTTP redirects. 3. Either not using an HTTPS origin server or for the proxy or target origin to redirect to a malicious origin. Users are advised to update to either version 1.26.19 or version 2.2.2. Users unable to upgrade may use the `Proxy-Authorization` header with urllib3's `ProxyManager`, disable HTTP redirects using `redirects=False` when sending requests, or not user the `Proxy-Authorization` header as mitigations. |
| Git is a revision control system. Prior to versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4, when cloning a local source repository that contains symlinks via the filesystem, Git may create hardlinks to arbitrary user-readable files on the same filesystem as the target repository in the `objects/` directory. Cloning a local repository over the filesystem may creating hardlinks to arbitrary user-owned files on the same filesystem in the target Git repository's `objects/` directory. When cloning a repository over the filesystem (without explicitly specifying the `file://` protocol or `--no-local`), the optimizations for local cloning
will be used, which include attempting to hard link the object files instead of copying them. While the code includes checks against symbolic links in the source repository, which were added during the fix for CVE-2022-39253, these checks can still be raced because the hard link operation ultimately follows symlinks. If the object on the filesystem appears as a file during the check, and then a symlink during the operation, this will allow the adversary to bypass the check and create hardlinks in the destination objects directory to arbitrary, user-readable files. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. |
| Git is a revision control system. The Git project recommends to avoid working in untrusted repositories, and instead to clone it first with `git clone --no-local` to obtain a clean copy. Git has specific protections to make that a safe operation even with an untrusted source repository, but vulnerabilities allow those protections to be bypassed. In the context of cloning local repositories owned by other users, this vulnerability has been covered in CVE-2024-32004. But there are circumstances where the fixes for CVE-2024-32004 are not enough: For example, when obtaining a `.zip` file containing a full copy of a Git repository, it should not be trusted by default to be safe, as e.g. hooks could be configured to run within the context of that repository. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. As a workaround, avoid using Git in repositories that have been obtained via archives from untrusted sources. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call the security_mmap_file() LSM hook in remap_file_pages()
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
$ gcc test.c -o test
$ ./test | grep rwx
7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted)
[PM: subject line tweaks] |
| In the Linux kernel, the following vulnerability has been resolved:
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path. |
