| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rtase: fix double free of multi-frag skb on DMA map failure
In rtase_start_xmit(), when the head buffer DMA mapping fails after
rtase_xmit_frags() has mapped all fragments, the error path clears
the fragment descriptors with rtase_tx_clear_range(), which frees
the skb through the last-frag slot and accounts tx_dropped. Control
then falls through to the common error label, which frees the same
skb a second time and counts it again.
Return right after clearing the fragments when the skb owns frags;
the no-frag case still drops through and frees the head skb once. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Fix race between LPI release and re-registration
Fix a potential race between decrementing an LPI's reference count and
evicting that structure from the LPI xarray.
LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa).
When the reference count of an LPI structure drops to zero,
vgic_release_lpi_locked() removes the structure from the xarray and
frees it under the xarray lock.
However, the release of an LPI can race with a concurrent LPI
re-registration with the same INTID via vgic_add_lpi() on another CPU,
since the reference count drop and the xarray eviction are not performed
in a single atomic step. This can happen e.g. if the guest issues a
DISCARD while the LPI is still referenced from a vCPU's active-pending
list (ap_list), and the same INTID is re-mapped via MAPTI.
Particularly, vgic_release_lpi_locked() is called from two distinct
paths: direct release via vgic_put_irq(), and deferred release via
vgic_release_deleted_lpis(). During direct release, the issue can result
in deleting a newly registered LPI from the xarray:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq()
__vgic_put_irq()
refcount_dec_and_test()
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(old_irq) == false
new IRQ inserted --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
xa_lock_irqsave();
vgic_release_lpi_locked()
__xa_erase(.., irq->intid) <-- BUG: new IRQ is erased
kfree_rcu(old_irq)
During the deferred release path, the old IRQ can be leaked:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq_norelease()
__vgic_put_irq()
refcount_dec_and_test()
irq->pending_release = true
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(oldirq) == false
BUG: old IRQ overwritten --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
vgic_release_deleted_lpis()
xa_lock_irqsave()
xa_for_each() { .. } <-- old IRQ with pending_release = true
is gone, so it cannot be released
To fix the direct release path, move the reference count drop inside
the xarray lock, making sure that vgic_add_lpi() never encounters the
to-be-released LPI.
In the deferred release path, the refcount drop must happen under a raw
spinlock, so the xarray lock cannot be grabbed, and the same solution
does not work. Instead, update vgic_add_lpi(), so that if it evicts
an LPI from the xarray, it takes on the responsibility of freeing it.
Consequently, an LPI may now be freed concurrently after a deferred
release drops the refcount, so accessing the pending_release field is no
longer safe from use-after-free. Delete all uses of the flag, and update
vgic_release_deleted_lpis() to identify orphaned LPIs purely based on
their refcount. |
| Missing Authorization vulnerability in Dolusoft Software Technologies Fortilogger allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects Fortilogger: before 6.1.5.9. |
| Dell ObjectScale, versions prior to 4.3.0.1, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| A flaw was found in 389 Directory Server. The dereference control plugin does not check for allocation failure before using a BER structure, allowing an unauthenticated remote attacker to crash the LDAP server when the system is under memory pressure. |
| A flaw was found in 389 Directory Server. An unauthenticated remote attacker can inject LDAP search filters into the CleanAllRUV replication status-check extended operation. Because the handler performs the search against cn=config with elevated replication plugin privileges and returns a boolean match result, the attacker can extract sensitive server configuration metadata, including replication bind DNs and password storage scheme information. |
| Improper neutralization of special elements used in an sql command ('sql injection') in Microsoft Entra Connect Sync allows an authorized attacker to elevate privileges locally. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in elixir-ecto postgrex allows SQL Injection via the :comment option of Postgrex.stream/4. An attacker who can influence that value can close the comment delimiter with */ and extend the streamed statement with their own clauses, which execute under the connection's role. Ecto exposes the same option through Ecto.Repo.stream/2.
Postgrex appends the comment by concatenating it into the statement text sent in the Parse message, without escaping or rejecting */. The option is validated by comment_not_present!/1 at every other execution point; stream/4 never calls it. Because Parse accepts a single command, the injection is confined to the streamed statement and further statements cannot be chained.
This issue affects postgrex: from 0.19.3 before 0.22.4. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to unsafe reflection. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to improper authorization. |
| In openshift-metal3/fakefish there is a repeated pattern in some of the scripts where shell variables
are injected without quoting them either into command lines or into
manifests. This mostly applies to the Image URL and BMC credentials
(which are not verified by FakeFish). |
| Vulnerability in the Oracle Configure to Order product of Oracle E-Business Suite (component: Supply to Order Workbench). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Configure to Order. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Configure to Order accessible data as well as unauthorized access to critical data or complete access to all Oracle Configure to Order accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to privilege escalation via Navigator for i. An authenticated user could elevate privileges to a root user to execute commands. |
| The vulnerability, if exploited, could allow an authenticated miscreant
with "DNA Authority - Operator" privilege to tamper with serialized
data, potentially resulting in code execution during deserialization
under the privilege of Enterprise SCADA security group "DNA Apps". |
| Vulnerability in the Oracle Configure to Order product of Oracle E-Business Suite (component: Supply to Order Workbench). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Configure to Order. While the vulnerability is in Oracle Configure to Order, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Configure to Order accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain elevated privileges due to improper validation of a client-supplied profile name. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Destroy the pages content after detaching from dmabuf
Sashiko points out this has gotten out of order, the mutex could still be
in use through the dmabuf invalidation callbacks. Don't destroy any of the
pages content until the dmabuf is fully detached. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount
Add a refcount for struct nf_ct_timeout which is used by ct extension to
set the custom ct timeout policy, this tells us that the ct timeout is
being used by a conntrack entry. When the last conntrack entry drops the
refcount on the ct timeout, the ct timeout is released.
Remove the refcount for control plane which controls if the ruleset
refers to the timeout policy. After this update, it is possible to
remove the ct timeout policy from nfnetlink_cttimeout immediately.
This is for simplicity not to handle two refcounts on a single object.
Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just
hold a reference to the nf_ct_timeout object until packet is reinjected,
since this is part of the ct extension, this will be released by the
time the conntrack is freed.
nf_ct_untimeout() is still called to clean up in a best effort basis:
the ct timeout on existing entries gets removed when the ct timeout goes
away, but as long as the iptables ruleset still refers to the ct timeout
through a template, new conntracks may keep attaching it and extend its
lifetime until the rule is removed.
nf_ct_untimeout() is not called anymore from module removal path, this
is unlikely to find timeouts give module refcount is bumped, and the new
refcount already tracks the ct timeout policy use so it is released when
unused. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take mmap_lock in zap_pages()
zap_vma_range() requires the owning mm's mmap_lock to be held.
Taking mmap_read_lock under arena->lock would AB-BA against
arena_vm_close() and arena_map_mmap(), both of which run with
mmap_write_lock held and then acquire arena->lock. Instead drop
arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and
re-resolve the vma via find_vma() since it may have been unmapped or
replaced while waiting.
Track processed vmls with a per-call generation in vml->zap_gen and
serialize zap_pages() callers with a new arena->zap_mutex so
concurrent callers on different uaddr ranges do not mark each other's
vmls processed before the zap is done. |
