| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: handle rbtree insertion error in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix clone_alias() to use the original device's devid
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix truncation for block sizes >= 4G
When the iommu is used the linearization of the mapping can give a single
block that is very large split across multiple SG entries.
When __rdma_block_iter_next() reassembles the split SG entries it is
overflowing the 32 bit stack values and computed the wrong DMA addresses
for blocks after the truncation.
Use the right types to hold DMA addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Zero-extend bpf prog return values and kfunc arguments
s390x ABI requires callers to zero-extend unsigned arguments and
sign-extend signed arguments, and callees to zero-extend unsigned
return values and sign-extend signed return values.
s390 BPF JIT currently implements only sign extension. Fix this
omission and implement zero extension too. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted" |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: add some missing log locking
Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(),
gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,
but these functions require exclusion against concurrent transactions.
To fix that, add a non-locking __gfs2_log_flush() function. Then, in
gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log
flushing functions and __gfs2_log_flush(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG
There were multiple issues in that code.
First of all the order between the reset semaphore and the mm_lock was
wrong (e.g. copy_to_user) was called while holding the lock.
Then we allocated memory while holding the reset semaphore which is also
a pretty big bug and can deadlock.
Then we used down_read_trylock() instead of waiting for the reset to
finish.
(cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, the GET /api/v3/relations endpoint allows any authenticated user to retrieve relations — and the subject (title) of work packages they have no permission to view — by supplying an arbitrary work package ID in the involved, fromId, or toId filter. This bypasses the Relation.visible scope due to a flawed performance optimization in RelationQuery. This vulnerability is fixed in 17.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
Calling perf_allow_kernel() from the NMI context is unsafe and could be
fatal. Capture the permission at event-initialization time by storing it
in event->hw.flags, and have the NMI handler rely on that cached flag
instead of making the call directly. |
| Broken Access Control in the devLXDInstancePatchHandler component of Canonical LXD allows an untrusted guest to mount, read, and overwrite another guest's custom storage volume via a crafted device PATCH request over /dev/lxd when security.devlxd.management.volumes is enabled. |
