| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush()
smbd_send_batch_flush() already calls smbd_free_send_io(),
so we should not call it again after smbd_post_send()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix integer overflow in rxgk_verify_response()
In rxgk_verify_response(), there's a potential integer overflow due to
rounding up token_len before checking it, thereby allowing the length check to
be bypassed.
Fix this by checking the unrounded value against len too (len is limited as
the response must fit in a single UDP packet). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix reference count leak in rxrpc_server_keyring()
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: Fix dma_free_coherent() size
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00usb: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm: move component registration to unmanaged version
q6apm component registers dais dynamically from ASoC toplology, which
are allocated using device managed version apis. Allocating both
component and dynamic dais using managed version could lead to incorrect
free ordering, dai will be freed while component still holding references
to it.
Fix this issue by moving component to unmanged version so
that the dai pointers are only freeded after the component is removed.
==================================================================
BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426
Tainted: [W]=WARN
Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024
Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]
Call trace:
show_stack+0x28/0x7c (C)
dump_stack_lvl+0x60/0x80
print_report+0x160/0x4b4
kasan_report+0xac/0xfc
__asan_report_load8_noabort+0x20/0x34
snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core]
devm_component_release+0x30/0x5c [snd_soc_core]
devres_release_all+0x13c/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Allocated by task 77:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x44/0x58
__kasan_kmalloc+0xbc/0xdc
__kmalloc_node_track_caller_noprof+0x1f4/0x620
devm_kmalloc+0x7c/0x1c8
snd_soc_register_dai+0x50/0x4f0 [snd_soc_core]
soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core]
snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core]
audioreach_tplg_init+0x124/0x1fc [snd_q6apm]
q6apm_audio_probe+0x10/0x1c [snd_q6apm]
snd_soc_component_probe+0x5c/0x118 [snd_soc_core]
soc_probe_component+0x44c/0xaf0 [snd_soc_core]
snd_soc_bind_card+0xad0/0x2370 [snd_soc_core]
snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core]
devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core]
x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100]
platform_probe+0xc0/0x188
really_probe+0x188/0x804
__driver_probe_device+0x158/0x358
driver_probe_device+0x60/0x190
__device_attach_driver+0x16c/0x2a8
bus_for_each_drv+0x100/0x194
__device_attach+0x174/0x380
device_initial_probe+0x14/0x20
bus_probe_device+0x124/0x154
deferred_probe_work_func+0x140/0x220
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Freed by task 3426:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
__kasan_save_free_info+0x4c/0x80
__kasan_slab_free+0x78/0xa0
kfree+0x100/0x4a4
devres_release_all+0x144/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use scratch field in MMIO fragment to hold small write values
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *al
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock
Take and hold kvm->lock for before checking sev_guest() in
sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock
is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't
rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to
a not-yet-initialized sev->regions_list, e.g. triggering a #GP
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024
RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83
Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00
RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256
RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000
RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000
R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000
R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000
FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0
Call Trace:
<TASK>
kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371
kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363
__se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f34e9f7e9a9
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9
RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007
RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8
</TASK>
with a syzlang reproducer that looks like:
syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async)
syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async)
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0)
r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0)
ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async)
ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async)
ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async)
r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0)
openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async)
ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async)
r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2)
close(r0) (async)
openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async)
ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async)
ioctl$KVM_RUN(r5, 0xae80, 0x0)
Opportunistically use guard() to avoid having to define a new error label
and goto usage. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list()
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page pool leak in error paths
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix NULL-deref on disconnect
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free. |
