| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uninitialized Use in Dawn in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in ANGLE in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Medium) |
| Uninitialized Use in WebCodecs in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger
When a durable file handle survives session disconnect (TCP close without
SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the
handle for later reconnection. However, it did not clean up the byte-range
locks on fp->lock_list.
Later, when the durable scavenger thread times out and calls
__ksmbd_close_fd(NULL, fp), the lock cleanup loop did:
spin_lock(&fp->conn->llist_lock);
This caused a slab use-after-free because fp->conn was NULL and the
original connection object had already been freed by
ksmbd_tcp_disconnect().
The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were
left dangling on the freed conn->lock_list while fp->conn was nulled out.
To fix this issue properly, we need to handle the lifetime of
smb_lock->clist across three paths:
- Safely skip clist deletion when list is empty and fp->conn is NULL.
- Remove the lock from the old connection's lock_list in
session_fd_check()
- Re-add the lock to the new connection's lock_list in
ksmbd_reopen_durable_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well. |
| A flaw was found in InstructLab. The `linux_train.py` script hardcodes `trust_remote_code=True` when loading models from HuggingFace. This allows a remote attacker to achieve arbitrary Python code execution by convincing a user to run `ilab train/download/generate` with a specially crafted malicious model from the HuggingFace Hub. This vulnerability can lead to complete system compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for
the virt_wifi net devices. However, unregistering a virt_wifi device in
netdev_run_todo() can happen together with the device referenced by
SET_NETDEV_DEV().
It can result in use-after-free during the ethtool operations performed
on a virt_wifi device that is currently being unregistered. Such a net
device can have the `dev.parent` field pointing to the freed memory,
but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`.
Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this:
==================================================================
BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0
Read of size 2 at addr ffff88810cfc46f8 by task pm/606
Call Trace:
<TASK>
dump_stack_lvl+0x4d/0x70
print_report+0x170/0x4f3
? __pfx__raw_spin_lock_irqsave+0x10/0x10
kasan_report+0xda/0x110
? __pm_runtime_resume+0xe2/0xf0
? __pm_runtime_resume+0xe2/0xf0
__pm_runtime_resume+0xe2/0xf0
ethnl_ops_begin+0x49/0x270
ethnl_set_features+0x23c/0xab0
? __pfx_ethnl_set_features+0x10/0x10
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xf/0xf0
? local_clock+0x10/0x30
? kasan_save_track+0x25/0x60
? __kasan_kmalloc+0x7f/0x90
? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0
genl_family_rcv_msg_doit+0x1e7/0x2c0
? __pfx_genl_family_rcv_msg_doit+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? stack_trace_save+0x8e/0xc0
genl_rcv_msg+0x411/0x660
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_ethnl_set_features+0x10/0x10
netlink_rcv_skb+0x121/0x380
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_down_read+0x10/0x10
genl_rcv+0x23/0x30
netlink_unicast+0x60f/0x830
? __pfx_netlink_unicast+0x10/0x10
? __pfx___alloc_skb+0x10/0x10
netlink_sendmsg+0x6ea/0xbc0
? __pfx_netlink_sendmsg+0x10/0x10
? __futex_queue+0x10b/0x1f0
____sys_sendmsg+0x7a2/0x950
? copy_msghdr_from_user+0x26b/0x430
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
___sys_sendmsg+0xf8/0x180
? __pfx____sys_sendmsg+0x10/0x10
? __pfx_futex_wait+0x10/0x10
? fdget+0x2e4/0x4a0
__sys_sendmsg+0x11f/0x1c0
? __pfx___sys_sendmsg+0x10/0x10
do_syscall_64+0xe2/0x570
? exc_page_fault+0x66/0xb0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This fix may be combined with another one in the ethtool subsystem:
https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid dereferencing log items after push callbacks
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: take a reference on the USB device in create_card()
The caiaq driver stores a pointer to the parent USB device in
cdev->chip.dev but never takes a reference on it. The card's
private_free callback, snd_usb_caiaq_card_free(), can run
asynchronously via snd_card_free_when_closed() after the USB
device has already been disconnected and freed, so any access to
cdev->chip.dev in that path dereferences a freed usb_device.
On top of the refcounting issue, the current card_free implementation
calls usb_reset_device(cdev->chip.dev). A reset in a free callback
is inappropriate: the device is going away, the call takes the
device lock in a teardown context, and the reset races with the
disconnect path that the callback is already cleaning up after.
Take a reference on the USB device in create_card() with
usb_get_dev(), drop it with usb_put_dev() in the free callback,
and remove the usb_reset_device() call. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io()
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/mc: Fix error path ordering in edac_mc_alloc()
When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path
will call put_device() which will end up calling the device's release
function.
However, the init ordering is wrong such that device_initialize() happens
*after* the failed allocation and thus the device itself and the release
function pointer are not initialized yet when they're called:
MCE: In-kernel MCE decoding enabled.
------------[ cut here ]------------
kobject: '(null)': is not initialized, yet kobject_put() is being called.
WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd
CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full)
RIP: 0010:kobject_put
Call Trace:
<TASK>
edac_mc_alloc+0xbe/0xe0 [edac_core]
amd64_edac_init+0x7a4/0xff0 [amd64_edac]
? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac]
do_one_initcall
...
Reorder the calling sequence so that the device is initialized and thus the
release function pointer is properly set before it can be used.
This was found by Claude while reviewing another EDAC patch. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: thead: Fix buffer overflow and use standard endian macros
Addresses two issues in the TH1520 AON firmware protocol driver:
1. Fix a potential buffer overflow where the code used unsafe pointer
arithmetic to access the 'mode' field through the 'resource' pointer
with an offset. This was flagged by Smatch static checker as:
"buffer overflow 'data' 2 <= 3"
2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard
kernel endianness conversion macros (cpu_to_be16, etc.) for better
portability and maintainability.
The functionality was re-tested with the GPU power-up sequence,
confirming the GPU powers up correctly and the driver probes
successfully.
[ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6645434 OS)
[ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on
minor 0 |
| Memory corruption when processing camera sensor input/output control codes with invalid output buffers. |
| Memory corruption when another driver calls an IOCTL with invalid input/output buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly. |
| Text::CSV_XS versions before 1.62 for Perl have a use-after-free when registered callbacks extend the Perl argument stack, which may enable type confusion or memory corruption.
The Parse, print, getline, and getline_all methods invoke registered callbacks (for example after_parse, before_print, or on_error) and cache the Perl argument stack pointer across the call. If a callback extends the argument stack enough to trigger a reallocation, the return value is written through the stale pointer into the freed buffer, and the caller reads the original $self argument as the return value instead.
Calling code that expects parsed data from getline_all receives the Text::CSV_XS object in its place, leading to logic errors or crashes. Text::CSV_XS objects used without any registered callbacks are not affected. |
| Untrusted pointer dereference in SQL Server allows an authorized attacker to execute code over a network. |
| OpenClaw before 2026.4.9 contains an authentication bypass vulnerability allowing untrusted workspace plugins to be auto-enabled during non-interactive onboarding when provider auth choices are shadowed. Attackers can exploit this by crafting malicious workspace plugins that are automatically selected and enabled during authentication setup without explicit user consent. |
