| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: never defer requests during idmap lookup
During v4 request compound arg decoding, some ops (e.g. SETATTR)
can trigger idmap lookup upcalls. When those upcall responses get
delayed beyond the allowed time limit, cache_check() will mark the
request for deferral and cause it to be dropped.
This prevents nfs4svc_encode_compoundres from being executed, and
thus the session slot flag NFSD4_SLOT_INUSE never gets cleared.
Subsequent client requests will fail with NFSERR_JUKEBOX, given
that the slot will be marked as in-use, making the SEQUENCE op
fail.
Fix this by making sure that the RQ_USEDEFERRAL flag is always
clear during nfs4svc_decode_compoundargs(), since no v4 request
should ever be deferred. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O
When allocating blocks during within-EOF DIO and writeback with
dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an
existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was
set when calling ext4_split_convert_extents(), which may potentially
result in stale data issues.
Assume we have an unwritten extent, and then DIO writes the second half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, ext4_iomap_alloc() call ext4_map_blocks() with
EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and
EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and
call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the
above flags set.
Then, ext4_split_convert_extents() calls ext4_split_extent() with
EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2
flags set, and it calls ext4_split_extent_at() to split the second half
with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT
and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()
failed to insert extent since a temporary lack -ENOSPC. It zeroes out
the first half but convert the entire on-disk extent to written since
the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten
in the extent status tree.
[0000000000SSSSSS] data S: stale data, 0: zeroed
[WWWWWWWWWWWWWWWW] on-disk extent W: written extent
[WWWWWWWWWWUUUUUU] extent status tree
Finally, if the DIO failed to write data to the disk, the stale data in
the second half will be exposed once the cached extent entry is gone.
Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting
an unwritten extent before submitting I/O, and make
ext4_split_convert_extents() to zero out the entire extent range
to zero for this case, and also mark the extent in the extent status
tree for consistency. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2
After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs
fields written by the CPU from vmcb02 to the cached vmcb12. This is
because the cached vmcb12 is used as the authoritative copy of some of
the controls, and is the payload when saving/restoring nested state.
int_state is also written by the CPU, specifically bit 0 (i.e.
SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to
cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE
preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow
would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites
what KVM_SET_NESTED_STATE restored in int_state).
However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an
interrupt shadow would be restored into vmcb01 instead of vmcb02. This
would mostly be benign for L1 (delays an interrupt), but not for L2. For
L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before
a HLT that should have been in an interrupt shadow).
Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02()
to avoid this problem. With that, KVM_SET_NESTED_STATE restores the
correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it
would overwrite it with the same value. |
| uniget is a universal installer and updater for (container) tools. Prior to 0.27.1, a command injection vulnerability exists in uniget due to unsafe execution of the check field from metadata files using /bin/bash -c. Because the check field is loaded directly from untrusted JSON metadata without validation or sanitization, an attacker can craft malicious metadata that executes arbitrary shell commands on the victim’s system when common uniget operations such as describe, install, update, or inspect are performed. This vulnerability can lead to arbitrary code execution with the privileges of the user running uniget. This vulnerability is fixed in 0.27.1. |
| OpenLearnX is an open-source, decentralized learning and assessment platform. Prior to 2.0.4, a critical authentication vulnerability was identified in OpenLearnX that could allow unauthorized access to user accounts under specific conditions. This vulnerability is fixed in 2.0.4. |
| FastNetMon Community Edition through 1.2.9 contains a configuration injection vulnerability in the Juniper router integration plugin. In src/juniper_plugin/fastnetmon_juniper.php, the $IP_ATTACK variable (received from argv[1]) is directly interpolated into Juniper NETCONF set-configuration commands at lines 69 and 90 without any validation or sanitization. Line 69: $conn->load_set_configuration("set routing-options static route {$IP_ATTACK} community 65535:666 discard"). Line 90: $conn->load_set_configuration("delete routing-options static route {$IP_ATTACK}/32"). An attacker who can control the IP address string can inject additional Juniper CLI configuration commands by embedding newline characters followed by arbitrary set/delete commands. This could modify the router's routing table, firewall filters, user accounts, or any other configuration element accessible via NETCONF. The impact is full router compromise. |
| SpSoft AppLock (com.sp.protector.free) 7.9.40 for Android allows a local attacker with physical access to bypass fingerprint or PIN authentication. Although the app integrates Android's biometric mechanisms, the lock is implemented with a custom overlay that fails to consistently enforce authentication. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents - an attacker can exit the lock interface without re-authentication and access protected apps (e.g., Chrome). This results in information disclosure and privilege escalation. |
| A NULL pointer dereference in GPAC MP4Box: when parsing certain truncated MP4 files, an unknown/invalid stsd entry can result in missing descriptor fields (e.g., codec/mime/profile strings). gf_media_map_esd then calls strlen() on a NULL pointer, triggering a crash (ASan SEGV). |
| Craft CMS 5.9.5 and earlier contains a Missing Authorization vulnerability in the migrate endpoint (/actions/app/migrate). |
| An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/cron/class/cronjob.class.php, call_user_func_array() in function job type |
| Northern.tech Mender Client 5 before 5.0.4 allows a Cryptographic signature verification bypass. |
| Command injection in Raynet rvia 12.6.4392.49-amd64.deb allows adversaries to execute commands via getconfig, and upload through the URL argument, and oracle through the -o flag The Supplier's perspective is that this is caused by Argument Injection in the find command query in rvia 12.6.4392.49. This in an arbitrary code execution flaw caused by an incorrectly constructed find command. The application actively searches for a Java executable by using search criteria that is not properly terminated or sanitized. By constructing a crafted directory path that satisfies the malformed search criteria, an attacker can trick the application into executing arbitrary Java code. This differs from standard PATH manipulation because it stems from the application's internal search logic. Specifically, a local attacker can create a crafted directory structure and path that satisfies an improperly terminated find query used by the application to locate a Java runtime. |
| Insecure Permissions vulnerability in kvf-admin v1.0.0 allows a remote attacker to escalate privileges via the UserController.java component |
| SQL Injection vulnerability in uzy-ssm-mall v1.1.0 allows a remote attacker to obtain sensitive information via the ProductMapper.xml and /OrderUtil.java components |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: clean up the amdgpu_cs_parser_bos
In low memory conditions, kmalloc can fail. In such conditions
unlock the mutex for a clean exit.
We do not need to amdgpu_bo_list_put as it's been handled in the
amdgpu_cs_parser_fini. |
