| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0
A malicious USB device with the TASCAM US-144MKII device id can have a
configuration containing bInterfaceNumber=1 but no interface 0. USB
configuration descriptors are not required to assign interface numbers
sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will
then be dereferenced directly.
Fix this up by checking the return value properly. |
| In the Linux kernel, the following vulnerability has been resolved:
bnge: return after auxiliary_device_uninit() in error path
When auxiliary_device_add() fails, the error block calls
auxiliary_device_uninit() but does not return. The uninit drops the
last reference and synchronously runs bnge_aux_dev_release(), which sets
bd->auxr_dev = NULL and frees the underlying object. The subsequent
bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a
good thing to have happen when trying to clean up from an error.
Add the missing return, as the auxiliary bus documentation states is a
requirement (seems that LLM tools read documentation better than humans
do...) |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix NULL pointer dereference in alps_raw_event()
Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()
Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using
uninitialized data.
Smatch warns that only 6 bytes are copied to this 8-byte (u64)
variable, leaving the last two bytes uninitialized:
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()
warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
Initializing the variable at the start of the function fixes this
warning and ensures predictable behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Only put the call ref if one was acquired
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key reference count leak from call->key
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$ |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject oversized global TT response buffers
batadv_tt_prepare_tvlv_global_data() builds the allocation length for a
global TT response in 16-bit temporaries. When a remote originator
advertises a large enough global TT, the TT payload length plus the VLAN
header offset can exceed 65535 and wrap before kmalloc().
The full-table response path still uses the original TT payload length when
it fills tt_change, so the wrapped allocation is too small and
batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object
before the later packet-size check runs.
Fix this by rejecting TT responses whose TVLV value length cannot fit in
the 16-bit TVLV payload length field. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm: move component registration to unmanaged version
q6apm component registers dais dynamically from ASoC toplology, which
are allocated using device managed version apis. Allocating both
component and dynamic dais using managed version could lead to incorrect
free ordering, dai will be freed while component still holding references
to it.
Fix this issue by moving component to unmanged version so
that the dai pointers are only freeded after the component is removed.
==================================================================
BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426
Tainted: [W]=WARN
Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024
Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]
Call trace:
show_stack+0x28/0x7c (C)
dump_stack_lvl+0x60/0x80
print_report+0x160/0x4b4
kasan_report+0xac/0xfc
__asan_report_load8_noabort+0x20/0x34
snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core]
devm_component_release+0x30/0x5c [snd_soc_core]
devres_release_all+0x13c/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Allocated by task 77:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x44/0x58
__kasan_kmalloc+0xbc/0xdc
__kmalloc_node_track_caller_noprof+0x1f4/0x620
devm_kmalloc+0x7c/0x1c8
snd_soc_register_dai+0x50/0x4f0 [snd_soc_core]
soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core]
snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core]
audioreach_tplg_init+0x124/0x1fc [snd_q6apm]
q6apm_audio_probe+0x10/0x1c [snd_q6apm]
snd_soc_component_probe+0x5c/0x118 [snd_soc_core]
soc_probe_component+0x44c/0xaf0 [snd_soc_core]
snd_soc_bind_card+0xad0/0x2370 [snd_soc_core]
snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core]
devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core]
x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100]
platform_probe+0xc0/0x188
really_probe+0x188/0x804
__driver_probe_device+0x158/0x358
driver_probe_device+0x60/0x190
__device_attach_driver+0x16c/0x2a8
bus_for_each_drv+0x100/0x194
__device_attach+0x174/0x380
device_initial_probe+0x14/0x20
bus_probe_device+0x124/0x154
deferred_probe_work_func+0x140/0x220
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Freed by task 3426:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
__kasan_save_free_info+0x4c/0x80
__kasan_slab_free+0x78/0xa0
kfree+0x100/0x4a4
devres_release_all+0x144/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use scratch field in MMIO fragment to hold small write values
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *al
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c. |
