Export limit exceeded: 378791 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378791 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378791 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72021 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset. | ||||
| CVE-2026-72027 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/compaction: handle free_pages_prepare() properly in compaction_free() free_pages_prepare() can fail but compaction_free() does not handle the failure case. Failed pages should not be added back to cc->freepages for future use, since they can be either PageHWPoison or free_page_is_bad() and might cause data corruption. | ||||
| CVE-2026-72033 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: keep the readdir entry size 64-bit in fill_from_part() fill_from_part() computes the size of a directory entry in size_t but stores it in a __u32. An entry length near U32_MAX wraps it to a small value, bypasses the bounds check, and is then used to index the entry, reading far past the directory part -- an out-of-bounds read that oopses the kernel. Compute the size as a u64 so it cannot truncate; the bounds check then rejects the entry. The trailer is supplied by the userspace client. | ||||
| CVE-2026-72035 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked When taprio's software path peeks a non-work-conserving child qdisc, the child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq() then takes the packet with a direct child ->dequeue() call, which ignores that stash, orphans the peeked skb and desyncs the child's qlen/backlog. With a qfq child this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb now do. The helper returns the child's stashed skb first and is a no-op when there is none, so a work-conserving child is unaffected and the gated path now consumes the skb whose length was charged to the budget. | ||||
| CVE-2026-72042 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix user refcount underflow in event delivery ipmi_alloc_recv_msg(user) takes the temporary user reference owned by the receive message, and ipmi_free_recv_msg() drops it again. If event delivery fails after allocating receive messages for earlier users, handle_read_event_rsp() rolls those messages back with ipmi_free_recv_msg(). That rollback path still drops user->refcount explicitly after freeing each message. The extra put can free a user that remains linked on intf->users, so later event delivery may dereference a freed user or trip refcount_t's addition-on-zero warning when ipmi_alloc_recv_msg() tries to acquire another reference. Remove the stale explicit put and the now-dead user assignment. Keep the list_del() and ipmi_free_recv_msg() calls; they are the required rollback operations. | ||||
| CVE-2026-72043 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption. Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits: if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_MODIFIED; The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case, where pmd entries need the same treatment. This ensures the software dirty tracking bit (checked by pte_dirty() and pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is preserved across fork COW write-protection. The issue was found by the LTP madvise09 test case, which exercises page reclaim after "madvise(MADV_FREE), write and fork" operation sequence on private anonymous mappings. | ||||
| CVE-2026-72046 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix header buffer corruption with header-split and HW-GRO The DQO RX datapath programs a per-buffer-queue-descriptor header_buf_addr at post time and reads the split header back at completion time. Both the post and the read currently index the header buffer by queue position rather than by the buffer's identity: - post (gve_rx_post_buffers_dqo): header_buf_addr is computed from bufq->tail - read (gve_rx_dqo): the header is read from desc_idx (the completion queue head index) This relies on the buffer-queue index and the completion-queue index being equal for the start of every packet, i.e. on the device consuming posted buffers and returning completions in the exact same order. That assumption does not hold once HW-GRO is enabled with multiple flows: coalesced segments are accepted and completed in an order that may differ from the order buffers were posted, and segments from different flows may interleave. That results in two problems: 1. Wrong header slot on read. Because the read offset is derived from the completion index (desc_idx) while the device wrote the header to the address programmed for the buffer's buf_id, the driver can copy a header belonging to a different packet. This shows up as throughput drop (about 30% drop and large numbers of TCP retransmissions) with header-split and HW-GRO both enabled and many streams. 2. Header buffer reused while still owned by the device. The driver advances bufq->head by one per completion and re-posts buffers based on that. Arrival of N RX completions only guarantees that at least N RX buffer descriptors have been read by the device. It does not guarantee that the device has relinquished the ownership of all the buffers corresponding to those N descriptors. With out-of-order completions (e.g. the completion for a packet copied into buffer N arrives before the completion for a packet copied into buffer N-1), the driver can re-post and overwrite a header buffer that the device is still going to write into, corrupting the header of a packet whose completion has not yet been processed. Fix both issues by indexing the header buffer by buf_id on both the post and read paths. Reading from buf_id's slot is therefore always correct regardless of completion ordering (fixes problem 1). Indexing by buf_id also ties each header slot to the lifetime of its buffer state. A buffer state is only returned to the free/recycle lists when its own completion (buf_id) is processed, so its header slot can only be re-posted after the device is done with it. This makes header slot reuse safe under out-of-order completions (fixes problem 2). Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the header buffers based on num_buf_states to match the buf_id indexing. | ||||
| CVE-2026-68462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative const offsets for buffer pointers The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF accesses, but it currently accepts a constant negative offset produced by pointer arithmetic. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") moved constant pointer offsets from reg->off to reg->var_off. However, __check_buffer_access() continued to check only the instruction offset. An access with reg->var_off equal to -8 and an instruction offset of zero therefore passes verification. For writable raw tracepoints, the access end is also calculated from the unsigned reg->var_off.value. An eight-byte access starting at -8 wraps the calculated end to zero, allowing the program to load and attach without increasing max_tp_access. After ensuring that reg->var_off is constant, calculate the effective access start using signed arithmetic and reject it when it is negative. Use the validated start to calculate the access end for both PTR_TO_TP_BUFFER and PTR_TO_BUF. | ||||
| CVE-2026-68466 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned. | ||||
| CVE-2026-19998 | 1 Code-projects | 1 Online Shopping System | 2026-08-17 | 4.3 Medium |
| A weakness has been identified in code-projects Online Shopping System 1.0. Impacted is an unknown function of the file offersmail.php. Executing a manipulation of the argument email can lead to cross site scripting. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-19979 | 2 Gl-inet, Gl.inet | 32 A1300, Ax1800, Axt1800 and 29 more | 2026-08-17 | 8.3 High |
| A vulnerability was identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. Affected by this vulnerability is the function COPY/MOVE of the component WebDAV Service. Such manipulation leads to authorization bypass. It is possible to launch the attack remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." | ||||
| CVE-2026-19996 | 1 Webkul | 1 Bagisto | 2026-08-17 | 4.3 Medium |
| A vulnerability was identified in Webkul Bagisto up to 2.4.4. This vulnerability affects unknown code of the file /admin/customers of the component Backend Customer Behavior Data Endpoint. Such manipulation of the argument ID leads to improper privilege management. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." | ||||
| CVE-2026-19995 | 1 Webkul | 1 Bagisto | 2026-08-17 | 3.5 Low |
| A vulnerability was determined in Webkul Bagisto up to 2.4.4. This affects an unknown part of the file /customer/account/rma/send-message of the component RMA Message Handler. This manipulation of the argument Message causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." | ||||
| CVE-2026-74555 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. | ||||
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74491 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of/address: Fix NULL bus dereference in of_pci_range_parser_one() The bus matching rework made of_match_bus() return NULL for nodes with ranges/dma-ranges but no local #address-cells. parser_init() stored that NULL bus, and the range iterator later dereferenced it. Reject such nodes in parser_init(), leaving an explicit empty iterator for callers that ignore the init return, and make of_dma_get_max_cpu_address() honour the init failure so a rejected node cannot clamp the DMA limit. | ||||
| CVE-2026-74448 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is always called on the error path without touching the uninitialized pqn pointer. AILIKFD-813 (cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) | ||||
| CVE-2026-74445 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. | ||||
| CVE-2026-74442 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. | ||||
| CVE-2026-72490 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt The null-pointer-guard was incorrect, returning _FAIL on valid pointer. Invert the guard, so it returns _FAIL on invalid pointer. | ||||