| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| AGL agl-service-can-low-level thru 17.1.12 contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE. |
| AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently. |
| AGL agl-service-can-low-level thru 17.1.12 contains a heap buffer over-read in the isotp-c library. In isotp_continue_receive (receive.c:87-89), the payload_length for a Single Frame is extracted from a 4-bit nibble in the CAN frame data, yielding values 0-15. However, a standard CAN frame is only 8 bytes, with payload starting at data[1] (7 bytes available). When payload_length exceeds the available data (e.g., nibble=15 but only 7 payload bytes exist), memcpy(message.payload, &data[1], payload_length) reads up to 8 bytes past the end of the data buffer. |
| SQL injection vulnerability in MixPHP Framework 2.x thru 2.2.17 via crafted `on` array to the joinOn function in BuildHelper.php. |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_canswitch.cpp the parser does not properly validate a CANswitch DLC value, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted CANswitch frames. |
| Integer underflow vulnerability in Open-SAE-J1939 thru commit b6caf884df46435e539b1ecbf92b6c29b345bdfe (2025-11-30) in SAE_J1939_Read_Transport_Protocol_Data_Transfer,allows attackers to write to arbitrary memory via crafted sequence number from the CAN frame. |
| openxc/isotp-c thru commit 5a5d19245f65189202719321facd49ce6f5d46ac (2021-08-09) contains an out-of-bounds read in the ISO-TP Single Frame receive handler, where the 4-bit payload length nibble is used directly as the memcpy size without validating it against the actual CAN data length. A malicious CAN frame with an oversized length nibble can cause memory reads beyond the buffer, allowing attackers to cause a denial of service, or gain sensitive information. |
| collin80/Open-SAE-J1939 thru commit 744024d4306bc387857dfce439558336806acb06 (2023-03-08) contains an integer underflow leading to out-of-bounds write in Transport Protocol Data Transfer handling. At line 23: uint8_t index = data[0] - 1. When data[0] (sequence number from CAN frame) is 0, index underflows to 255. Subsequent write at tp_dt->data[255*7 + i-1] reaches offset 1791, exceeding the MAX_TP_DT buffer (1785 bytes) by 6 bytes. |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_pcap.cpp , the parser's phdr.len field is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted PCAP input. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f8d ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5, when mod_proxy65 is enabled. Because mod_proxy65 mishandles access control in a paused scenario, relaying of unauthenticated traffic can occur. |
| Profile import path traversal in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service and possible code execution |
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Series CC-Link IE TSN Master/Local Module, MELSEC iQ-R Series Ethernet Interface Module, CC-Link IE TSN Master/Local Station Communication LSI CP610, MELSEC iQ-F Series FX5 CC-Link IE TSN Master/Local Module, MELSEC iQ-F Series FX5 Ethernet Module, and MELSEC iQ-F Series FX5-ENET/IP Ethernet Module allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. |
| Inconsistent Interpretation of HTTP Requests vulnerability in mtrudel bandit allows HTTP request smuggling via duplicate Content-Length headers.
'Elixir.Bandit.Headers':get_content_length/1 in lib/bandit/headers.ex uses List.keyfind/3, which returns only the first matching header. When a request contains two Content-Length headers with different values, Bandit silently accepts it, uses the first value to read the body, and dispatches the remaining bytes as a second pipelined request on the same keep-alive connection. RFC 9112 §6.3 requires recipients to treat this as an unrecoverable framing error.
When Bandit sits behind a proxy that picks the last Content-Length value and forwards the request rather than rejecting it, an unauthenticated attacker can smuggle requests past edge WAF rules, path-based ACLs, rate limiting, and audit logging.
This issue affects bandit: before 1.11.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated remote denial of service via memory exhaustion when WebSocket permessage-deflate compression is enabled.
'Elixir.Bandit.WebSocket.PerMessageDeflate':inflate/2 in lib/bandit/websocket/permessage_deflate.ex calls :zlib.inflate/2 with no output-size cap, then materializes the entire decompressed payload as a single binary via IO.iodata_to_binary/1. The websocket_options.max_frame_size option only bounds the on-the-wire (compressed) frame size, not the decompressed output. A high-ratio compressed frame (e.g. uniform data at ~1024:1 ratio) can stay well under any wire-size limit while forcing GiB-scale heap allocations in the connection process before any application code runs.
An unauthenticated attacker who can open a WebSocket connection can send a single such frame to exhaust the BEAM node's memory and trigger an OOM kill.
This vulnerability requires both Bandit's server-level websocket_options.compress and the per-upgrade compress: true option passed to WebSockAdapter.upgrade/4 to be enabled. Stock Phoenix and LiveView applications are not affected as they default to compress: false.
This issue affects bandit: from 0.5.9 before 1.11.0. |
| Reliance on Untrusted Inputs in a Security Decision vulnerability in mtrudel bandit allows unauthenticated transport-state spoofing on plaintext HTTP connections.
'Elixir.Bandit.Pipeline':determine_scheme/2 in lib/bandit/pipeline.ex returns the client-supplied URI scheme verbatim, ignoring the transport's secure? flag. HTTP/1.1 absolute-form request targets (e.g. GET https://victim/path HTTP/1.1) and the HTTP/2 :scheme pseudo-header are both attacker-controlled strings that flow through this function. Over a plaintext TCP connection, a client can declare https and Bandit will set conn.scheme = :https even though no TLS was negotiated.
Downstream Plug consumers that branch on conn.scheme are silently misled: Plug.SSL's already-secure branch skips its HTTP→HTTPS redirect, cookies emitted with secure: true are sent over plaintext, audit logs record requests as having arrived over HTTPS, and CSRF/SameSite gating may make incorrect decisions.
This issue affects bandit: from 1.0.0 before 1.11.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated remote denial of service via memory exhaustion.
The fragment reassembly path in 'Elixir.Bandit.WebSocket.Connection':handle_frame/3 in lib/bandit/websocket/connection.ex appends every incoming Continuation{fin: false} frame's payload to a per-connection iolist with no cumulative size cap. The existing max_frame_size option only bounds individual frames; a peer that streams an unbounded number of continuation frames without ever setting fin=1 grows BEAM heap linearly until the OS or a supervisor kills the process.
Because the accumulation happens before WebSock.handle_in/2 is called, the application has no opportunity to interpose a size check. Phoenix Channels and LiveView both run over WebSock on Bandit, so a stock Phoenix application exposes this surface as soon as it accepts socket connections.
This issue affects bandit: from 0.5.0 before 1.11.0. |
