| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE
__decode_pg_temp() decodes an user-controlled length but only rejects
values large enough to overflow the allocation; it does not bound it to
CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and
apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size
on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends
an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack
out-of-bounds write.
An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer
entries at decode time. The bound is well below the old overflow threshold, so
it also covers the allocation-size overflow the previous check guarded against.
BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds
Write of size 4 ... by task exploit
kasan_report (mm/kasan/report.c:595)
ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833)
calc_target (net/ceph/osd_client.c:1638)
__submit_request (net/ceph/osd_client.c:2394)
ceph_osdc_start_request (net/ceph/osd_client.c:2490)
ceph_osdc_call (net/ceph/osd_client.c:5164)
rbd_dev_image_probe (drivers/block/rbd.c:6899)
do_rbd_add (drivers/block/rbd.c:7138)
...
kernel BUG at net/ceph/osdmap.c:2670!
[ idryomov: do the same in __decode_pg_upmap_items() ] |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid auth_enable sysctl UAF during netns teardown
proc_sctp_do_auth() updates the SCTP control socket after changing
net.sctp.auth_enable. The handler gets the per-net SCTP state from
ctl->data, so an already opened sysctl file can still target a network
namespace while that namespace is being torn down.
SCTP previously registered its per-net sysctls from sctp_defaults_init(),
while the control socket is created later from sctp_ctrlsock_init(). This
exposed a window during initialization where auth_enable was writable
before net->sctp.ctl_sock existed, and a teardown window where auth_enable
stayed writable after inet_ctl_sock_destroy() had released the control
socket.
Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after
sctp_ctl_sock_init() succeeds, and unregister the sysctl table before
destroying the control socket in sctp_ctrlsock_exit(). If sysctl
registration fails after the control socket was created, destroy the
control socket in the same init path.
Make sctp_sysctl_net_unregister() tolerate a missing header and clear the
saved pointer so init-error and exit paths can safely share the unregister
helper. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5) |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: remove debugfs files before client teardown
ceph_destroy_client() tears down the monitor client before removing
the per-client debugfs files. A concurrent read of the monmap debugfs
file can enter monmap_show() after ceph_monc_stop() has freed
monc->monmap, triggering a use-after-free.
Remove the debugfs files before stopping the OSD and monitor clients.
debugfs_remove() drains active handlers and prevents new accesses, so
the debugfs callbacks can no longer race the rest of client teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reject zero bucket types in crush_decode
CRUSH bucket type 0 is reserved for devices. The mapper relies on
that invariant and uses type 0 to identify leaf devices.
If crush_decode() accepts a bucket with type 0, a malformed CRUSH map
can make the mapper treat a negative bucket ID as a device and pass it
to is_out(), which then indexes the OSD weight array with a negative
value.
Reject zero bucket types while decoding the CRUSH map so the invalid
state never reaches the mapper. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Reject monmaps advertising zero monitors
A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a
monitor to the client. This monmap contains information about the
existing monitors in the cluster. Currently, a monmap indicating that
there are zero monitors in the cluster is treated as valid. However, it
is impossible to have zero monitors in the cluster and still receive a
valid monmap from a monitor. Therefore, such a monmap must be corrupted
and should be treated as invalid. Furthermore, a monmap with a monitor
count of zero can subsequently crash the client when attempting to open
a session with a monitor in __open_session(). This happens because the
"BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is
triggered.
This patch extends a check in ceph_monmap_decode() to also reject
arriving mon_maps with num_mon == 0 rather than only with
num_mon > CEPH_MAX_MON.
[ idryomov: drop "log output for unusual values of num_mon" part ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix multiplication overflow in decode_new_up_state_weight()
If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted
osdmap, out-of-bounds memory accesses may occur in
decode_new_up_state_weight(). This happens because the bounds check for
the new_state part is based on calculating its length depending on a len
value read from the incoming message. This calculation may overflow
leading to an incorrect bounds check. Subsequently, out-of-bounds reads
may occur when decoding this part.
This patch switches the multiplication to use check_mul_overflow() to
abort processing the osdmap if an overflow occurred. Therefore,
osdmaps/messages containing large values for len that result in a
multiplication overflow are treated as invalid.
[ idryomov: rename new_state_len -> new_state_item_size, formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_vma_mapped: fix device-private PMD handling
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") introduced the concept of device-private PMD
entries, but did not correctly update the rmap walk code to account for
them.
As a result, when page_vma_mapped_walk() encounters device-private PMD
entries, it takes no action other than to acquire the PMD lock and exit.
However this is highly problematic for two reasons - firstly, device
private entries possess a PFN so check_pmd() needs to be called to ensure
an overlapping PFN range.
Secondly, and more importantly, if PVMW_MIGRATION is set the caller
assumes the returned entry is a migration entry, resulting in memory
corruption when the caller tries to interpret the device private entry as
such.
In addition, commit 146287290023 ("mm/huge_memory: implement
device-private THP splitting") allowed device private PMDs to be split
like THP mappings, but again did not update this code path.
As a result, we might race a PMD split prior to acquiring the PMD lock.
This patch addresses all of these issues by invoking check_pmd(), ensuring
PMVW_MIGRATION is not set and checks whether a split raced us we do for
PMD THP and migration entries.
Instead of checking for a subset of the cases after taking the pmd_lock(),
put device-private along with pmd_trans_huge() and
pmd_is_migration_entry(). Also remove thp_migration_supported() as it is
already guarded by pmd_is_migration_entry().
[akpm@linux-foundation.org: fix Raspberry Pi 1 build, per David] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate ranges in damon_set_regions()
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hip04: fix RX buffer leak on build_skb failure
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free in x25_kill_by_neigh()
x25_kill_by_neigh() walks the global X.25 socket list looking for sockets
attached to a terminating neighbour. x25_list_lock protects list membership
while the lookup is in progress, but it does not pin a socket's lifetime
after the lock is dropped.
The function currently drops x25_list_lock before calling lock_sock(s). A
concurrent close can run x25_release(), remove the same socket from
x25_list, and drop the last socket reference in that window. The neighbour
teardown path can then lock or inspect a freed struct sock/struct x25_sock.
Take sock_hold(s) while x25_list_lock still proves that the list entry is
live, then drop the temporary reference after the socket has been locked,
rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(),
because another path may have disconnected the socket before this path
acquired the socket lock. Restart the list walk after each disconnect
because the list lock was dropped and the previous iterator state may no
longer be valid.
A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in
x25_kill_by_neigh(). |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
net: slip: serialize receive against buffer reallocation
sl_realloc_bufs() replaces rbuff and updates buffsize while holding
sl->lock. slip_receive_buf() reads those fields and writes through rbuff
without holding the lock.
An MTU change can therefore race with receive processing. An MTU shrink
can expose the new smaller rbuff with the old larger bound, causing an
out-of-bounds write. A receive callback which already loaded the old
rbuff can instead continue writing after that buffer has been freed.
Serialize receive processing with sl_realloc_bufs() by holding sl->lock
while consuming each receive batch. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: fix out-of-bounds bitmap_set() with zero-length range
ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk
as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the
unsigned subtraction underflows to SIZE_MAX, producing a huge
last_blk and nr_blks value that causes bitmap_set() to write far
beyond the ifs->state allocation.
Regarding ifs_set_range_uptodate(), it is temporarily safe because len
cannot be passed in as 0. However, for ifs_set_range_dirty() this is
reachable from __iomap_write_end(): when copy_folio_from_iter_atomic()
returns 0 (e.g. user buffer fault) and the folio is already uptodate,
the guard at the top of __iomap_write_end() does not trigger because
!folio_test_uptodate() is false, and iomap_set_range_dirty() is called
with copied == 0.
Add a !len guard to both functions before the computation, so that a
zero-length range is a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: Add missing superblock check in find_or_insert_direct_key()
The legacy 'fscrypt_direct_keys' table caches master keys that are used
by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY.
It's just a global table for all filesystems (since the keys can be
provided by the legacy process-subscribed keyrings mechanism, which
makes it difficult to reuse super_block::s_master_keys).
The entries in it ('struct fscrypt_direct_key') do contain a super_block
pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when
the last inode that references the key is evicted.
However, when finding the fscrypt_direct_key for an inode, we weren't
actually comparing the super_block pointer. As a result, inodes with
different super_blocks could point to the same fscrypt_direct_key. That
could extend the lifetime of a fscrypt_direct_key beyond the
super_block it points to, causing a use-after-free later.
Fix this by creating distinct fscrypt_direct_key structs for distinct
super_block structs.
Note that this problem doesn't exist in the v2 policy equivalent
("per-mode keys"), since the data structures there are per super_block. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: preserve ACL_DONT_CACHE state in forget_cached_acl()
The ACL_DONT_CACHE state is meant to be a constant state for the inode
for filesystems that want to opt out of posix acl caching.
Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api")
used this facility to opt out of posix acl caching for fuse inodes with
fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl).
The commit also takes care to gate the forget_all_cached_acls() call in
fuse_set_acl() on fc->posix_acl because there is no need for it, but
there are other placed in fuse code which call forget_all_cached_acls()
unconditional to fc->posix_acl and those cause the loss of the
ACL_DONT_CACHE state.
This is not only a functional bug. Properly timed, a get_acl() from this
fuse filesystem can return a stale cached value, as was observed in tests,
because set_acl() does not invalidate the unintentional acl cache.
We could fix this in fuse, but it actually makes no sense for the vfs
helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so
let it not do that to fix fuse and future users of ACL_DONT_CACHE. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/super: fix emergency thaw double-unlock of s_umount
do_thaw_all() iterates over all superblocks via __iterate_supers()
with SUPER_ITER_EXCL, which acquires s_umount exclusively before
calling the callback and releases it afterwards. However, the
callback do_thaw_all_callback() calls thaw_super_locked() which
unconditionally releases s_umount on every code path. This results
in a second unlock attempt in __iterate_supers() that corrupts the
rwsem state, triggering a DEBUG_RWSEMS warning:
[ 182.601148] sysrq: Emergency Thaw of all frozen filesystems
[ 182.601865] ------------[ cut here ]------------
[ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty
[ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53
[ 182.604578] Modules linked in:
[ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy)
[ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014
[ 182.606417] Workqueue: events do_thaw_all
[ 182.606750] RIP: 0010:up_write+0xaf/0x170
[ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d
[ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246
[ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870
[ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10
[ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80
[ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000
[ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800
[ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000
[ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0
[ 182.613722] Call Trace:
[ 182.613946] <TASK>
[ 182.614130] __iterate_supers+0x128/0x150
[ 182.614463] do_thaw_all+0x1b/0x30
[ 182.614759] process_scheduled_works+0xbb/0x3f0
[ 182.615150] ? __pfx_worker_thread+0x10/0x10
[ 182.615499] worker_thread+0x129/0x270
[ 182.615816] ? __pfx_worker_thread+0x10/0x10
[ 182.616201] kthread+0xe2/0x120
[ 182.616469] ? __pfx_kthread+0x10/0x10
[ 182.616792] ret_from_fork+0x15b/0x240
[ 182.617115] ? __pfx_kthread+0x10/0x10
[ 182.617426] ret_from_fork_asm+0x1a/0x30
[ 182.617761] </TASK>
[ 182.617968] ---[ end trace 0000000000000000 ]---
[ 182.618412] Emergency Thaw complete
Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount
in the callback via super_lock_excl() before calling
thaw_super_locked(). This matches the locking pattern expected by
thaw_super_locked() and eliminates the double unlock.
While at it, remove the dead 'return;' at the end of
do_thaw_all_callback(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. For dynamic
events, the union member is 'refcnt', which acts as an active
reference counter.
When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or
wprobe) has a non-zero reference count (e.g. due to active event
triggers or perf attachments), its 'call->module' evaluates to a
small non-zero integer instead of NULL.
When filtering or setting events for a specific module (e.g., writing
':mod:<module>' to 'set_event'), the code in
'__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads
'call->module' directly without checking whether the event is dynamic.
This causes the kernel to treat the small integer (refcnt) as a
'struct module' pointer, leading to a NULL/invalid pointer dereference
(Oops) when dereferencing the module name.
Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked
before treating 'call->module' as a valid pointer in these code paths. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: fix use-after-free in AMT delayed works
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
damon_set_regions() assumes the input ranges are sorted by the address and
don't overlap each other. Hence the assumption was initially to be
explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse
damon_set_regions() for regions setting") has mistakenly removed the
validation.
This can make DAMON behave in unexpected ways. At the best, the
monitoring results snapshot will just look weird since there will be
overlapping regions. DAMOS will also work weirdly, applying the same
action multiple times for overlapping regions, and make DAMOS quota weird.
More seriously, depending on the setup and regions updates sequence,
negative size regions can be made. It will trigger WARN_ONCE() if the
kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the
monitoring results, the negative size region can further trigger division
by zero in damon_merge_two_regions().
Note that some of the consequences including the WARN_ONCE() and the
divide by zero depend on commits that were introduced after the root cause
commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for
regions setting").
Fix the problems by checking the assumption and returning an error if
the input ranges don't meet the assumption.
The issue was discovered [1] by Sashiko. |
