| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix potential array overflow in bpf_trampoline_get_progs()
The cnt value in the 'cnt >= BPF_MAX_TRAMP_PROGS' check does not
include BPF_TRAMP_MODIFY_RETURN bpf programs, so the number of
the attached BPF_TRAMP_MODIFY_RETURN bpf programs in a trampoline
can exceed BPF_MAX_TRAMP_PROGS.
When this happens, the assignment '*progs++ = aux->prog' in
bpf_trampoline_get_progs() will cause progs array overflow as the
progs field in the bpf_tramp_progs struct can only hold at most
BPF_MAX_TRAMP_PROGS bpf programs. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init
Syzbot reported that -1 is used as array index. The problem was in
missing validation check.
hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.
hdw->workpoll initialization moved upper to prevent warning in
__flush_work. |
| In the Linux kernel, the following vulnerability has been resolved:
rtw89: cfo: check mac_id to avoid out-of-bounds
Somehow, hardware reports incorrect mac_id and pollute memory. Check index
before we access the array.
UBSAN: array-index-out-of-bounds in rtw89/phy.c:2517:23
index 188 is out of range for type 's32 [64]'
CPU: 1 PID: 51550 Comm: irq/35-rtw89_pc Tainted: G OE
Call Trace:
<IRQ>
show_stack+0x52/0x58
dump_stack_lvl+0x4c/0x63
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_out_of_bounds.cold+0x44/0x49
? __alloc_skb+0x92/0x1d0
rtw89_phy_cfo_parse+0x44/0x7f [rtw89_core]
rtw89_core_rx+0x261/0x871 [rtw89_core]
? __alloc_skb+0xee/0x1d0
rtw89_pci_napi_poll+0x3fa/0x4ea [rtw89_pci]
__napi_poll+0x33/0x1a0
net_rx_action+0x126/0x260
? __queue_work+0x217/0x4c0
__do_softirq+0xd9/0x315
? disable_irq_nosync+0x10/0x10
do_softirq.part.0+0x6d/0x90
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
rtw89_pci_interrupt_threadfn+0x182/0x1a6 [rtw89_pci]
irq_thread_fn+0x28/0x60
irq_thread+0xc8/0x190
? irq_thread_fn+0x60/0x60
kthread+0x16b/0x190
? irq_thread_check_affinity+0xe0/0xe0
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
While enumerating protocols implemented by the SCMI platform using
BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is
currently validated in an improper way since the check employs a sum
between unsigned integers that could overflow and cause the check itself
to be silently bypassed if the returned value 'loop_num_ret' is big
enough.
Fix the validation avoiding the addition. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: rzg2l_wdt: Fix 32bit overflow issue
The value of timer_cycle_us can be 0 due to 32bit overflow.
For eg:- If we assign the counter value "0xfff" for computing
maxval.
This patch fixes this issue by appending ULL to 1024, so that
it is promoted to 64bit.
This patch also fixes the warning message, 'watchdog: Invalid min and
max timeout values, resetting to 0!'. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq()
The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp: Fix OOB read when handling Post Cursor2 register
The link_status array was not large enough to read the Adjust Request
Post Cursor2 register, so remove the common helper function to avoid
an OOB read, found with a -Warray-bounds build:
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor':
drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds]
59 | return link_status[r - DP_LANE0_1_STATUS];
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status'
147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the only user of the helper with an open-coded fetch and decode,
similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent some integer underflows
My static checker complains that:
drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init()
warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'?
It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware
in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could
be zero. Even if we trust the firmware, it's easy enough to change the
condition just as a hardenning measure. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: prevent array overflow in visconti_clk_register_gates()
This code was using -1 to represent that there was no reset function.
Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0)
condition was always true. This lead to an out of bounds access in
visconti_clk_register_gates(). |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: potential buffer overflow in handling symlinks
Smatch printed a warning:
arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error:
__memcpy() 'dctx->buf' too small (16 vs u32max)
It's caused because Smatch marks 'link_len' as untrusted since it comes
from sscanf(). Add a check to ensure that 'link_len' is not larger than
the size of the 'link_str' buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link]. |
| D-Link DI-8100 16.07.26A1 is vulnerable to Buffer Overflow via the en`, `val and id parameters in the qj_asp function. This vulnerability allows authenticated attackers to cause a Denial of Service (DoS) by sending crafted GET requests with overly long values for these parameters. |
| A vulnerability was found in oatpp Oat++ up to 1.3.1. It has been declared as critical. This vulnerability affects the function deserializeArray of the file src/oatpp/json/Deserializer.cpp. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| The unsafe globals in Picklescan before 0.0.25 do not include ssl. Consequently, ssl.get_server_certificate can exfiltrate data via DNS after deserialization. |
| Mattermost versions 10.4.x <= 10.4.2, 10.5.x <= 10.5.0, 9.11.x <= 9.11.10 fail to properly validate the props used by the RetrospectivePost custom post type in the Playbooks plugin, which allows an attacker to create a specially crafted post with maliciously crafted props and cause a denial of service (DoS) of the web app for all users. |
| A vulnerability classified as problematic has been found in vercel hyper up to 3.4.1. This affects the function expand/braceExpand/ignoreMap of the file hyper/bin/rimraf-standalone.js. The manipulation leads to inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature
Fix memory corruption due to incorrect parameter being passed to bio_init |
| An authorized user may trigger crashes or receive the contents of buffer over-reads of Server memory by issuing specially crafted requests that construct malformed BSON in the MongoDB Server. This issue affects MongoDB Server v5.0 versions prior to 5.0.30 , MongoDB Server v6.0 versions prior to 6.0.19, MongoDB Server v7.0 versions prior to 7.0.15 and MongoDB Server v8.0 versions prior to and including 8.0.2. |
| Nextcloud Server is a self hosted personal cloud system. After setting up a user or administrator defined external storage with fixed credentials, the API returns them and adds them into the frontend again, allowing to read them in plain text when an attacker already has access to an active session of a user. It is recommended that the Nextcloud Server is upgraded to 28.0.12, 29.0.9 or 30.0.2 and Nextcloud Enterprise Server is upgraded to 25.0.13.14, 26.0.13.10, 27.1.11.10, 28.0.12, 29.0.9 or 30.0.2. |
