| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cassini: Fix a memory leak in the error handling path of cas_init_one()
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix leak of 'r10bio->remaining' for recovery
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: don't reissue in case of poll race on multishot request
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen2: Add sanity check for session stop
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix the issue of CMDQ memory leaks
When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is
not released correctly. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.
Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.
So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.
Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: fix fid refcount leak in v9fs_vfs_get_link
we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
xtensa: Fix refcount leak bug in time.c
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: Fix refcount leak in axxia_boot_secondary
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
Add missing of_node_put() in to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: microchip: ksz_common: Fix refcount leak bug
In ksz_switch_register(), we should call of_node_put() for the
reference returned by of_get_child_by_name() which has increased
the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix handling of dummy receive descriptors
Fix memory leak caused by not handling dummy receive descriptor properly.
iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive
descriptors. Without this patch, when the hardware writes a dummy
descriptor, iavf would not free the page allocated for the previous receive
buffer. This is an unlikely event but can still happen.
[Jesse: massaged commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: Fix refcount leak in xive_spapr_init
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbip: fix a refcount leak in stub_probe()
usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails
after that, usb_put_dev() needs to be called to release the reference.
Fix this by moving usb_put_dev() to sdev_free error path handling.
Find this by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_register
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: Fix xarray node memory leak
If xas_split_alloc() fails to allocate the necessary nodes to complete the
xarray entry split, it sets the xa_state to -ENOMEM, which xas_nomem()
then interprets as "Please allocate more memory", not as "Please free
any unnecessary memory" (which was the intended outcome). It's confusing
to use xas_nomem() to free memory in this context, so call xas_destroy()
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: syscfg: Fix memleak on registration failure in cscfg_create_device
device_register() calls device_initialize(),
according to doc of device_initialize:
Use put_device() to give up your reference instead of freeing
* @dev directly once you have called this function.
To prevent potential memleak, use put_device() for error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: fix memory leak in jffs2_scan_medium
If an error is returned in jffs2_scan_eraseblock() and some memory
has been added to the jffs2_summary *s, we can observe the following
kmemleak report:
--------------------------------------------
unreferenced object 0xffff88812b889c40 (size 64):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
hex dump (first 32 bytes):
40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P.
00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................
backtrace:
[<ffffffffae93a3a3>] __kmalloc+0x613/0x910
[<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0
[<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794
[<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267
[<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0
[<ffffffffb0315d64>] mtd_get_sb+0x254/0x400
[<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0
[<ffffffffb0316478>] get_tree_mtd+0x498/0x840
[<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30
[<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0
[<ffffffffaea7a98f>] path_mount+0x50f/0x1e50
[<ffffffffaea7c3d7>] do_mount+0x107/0x130
[<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0
[<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160
[<ffffffffb10142f5>] do_syscall_64+0x45/0x70
unreferenced object 0xffff888114b54840 (size 32):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
hex dump (first 32 bytes):
c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u..............
00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90
[<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794
[...]
unreferenced object 0xffff888114b57280 (size 32):
comm "mount", pid 692, jiffies 4294838393 (age 34.357s)
hex dump (first 32 bytes):
10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l.............
00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90
[<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794
[...]
unreferenced object 0xffff8881116cd510 (size 16):
comm "mount", pid 692, jiffies 4294838395 (age 34.355s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90
[<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794
[...]
--------------------------------------------
Therefore, we should call jffs2_sum_reset_collected(s) on exit to
release the memory added in s. In addition, a new tag "out_buf" is
added to prevent the NULL pointer reference caused by s being NULL.
(thanks to Zhang Yi for this analysis) |
