| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Fix an unlikely NULL pointer deference at probe
intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
(cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Limit BO list entry count to prevent resource exhaustion
Userspace can pass an arbitrary number of BO list entries via the
bo_number field. Although the previous multiplication overflow check
prevents out-of-bounds allocation, a large number of entries could still
cause excessive memory allocation (up to potentially gigabytes) and
unnecessarily long list processing times.
Introduce a hard limit of 128k entries per BO list, which is more than
sufficient for any realistic use case (e.g., a single list containing all
buffers in a large scene). This prevents memory exhaustion attacks and
ensures predictable performance.
Return -EINVAL if the requested entry count exceeds the limit
(cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332) |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: microchip: mpfs: Fix memory leak in mpfs_sys_controller_probe()
In mpfs_sys_controller_probe(), if of_get_mtd_device_by_node() fails,
the function returns immediately without freeing the allocated memory
for sys_controller, leading to a memory leak.
Fix this by jumping to the out_free label to ensure the memory is
properly freed.
Also, consolidate the error handling for the mbox_request_channel()
failure case to use the same label. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Synchronize interrupts before suspending the GPU
The runtime PM suspend callback doesn't know whether the IRQ handler is
in progress on a different CPU core and doesn't wait for it to finish.
Depending on timing, the IRQ handler could be running while the GPU is
suspended, leading to kernel crashes when trying to access GPU
registers. See example signature below.
In a power off sequence initiated by the runtime PM suspend callback,
wait for any IRQ handlers in progress on other CPU cores to finish, by
calling synchronize_irq().
At the same time, remove the runtime PM resume/put calls in the threaded
IRQ handler. On top of not being the right approach to begin with, and
being at the wrong place as they should have wrapped all GPU register
accesses, the driver would hit a deadlock between synchronize_irq()
being called from a runtime PM suspend callback, holding the device
power lock, and the resume callback requiring the same.
Example crash signature on a TI AM68 SK platform:
[ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241246] Tainted: [M]=MACHINE_CHECK
[ 337.241249] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24
[ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310
[ 337.241282] sp : ffff800085b0bd30
[ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10
[ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000
[ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30
[ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001
[ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40
[ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a
[ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00
[ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003
[ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000
[ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000
[ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241342] Tainted: [M]=MACHINE_CHECK
[ 337.241343] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241345] Call trace:
[ 337.241348] show_stack+0x18/0x24 (C)
[ 337.241357] dump_stack_lvl+0x60/0x80
[ 337.241364] dump_stack+0x18/0x24
[ 337.241368] vpanic+0x124/0x2ec
[ 337.241373] abort+0x0/0x4
[ 337.241377] add_taint+0x0/0xbc
[ 337.241384] arm64_serror_panic+0x70/0x80
[ 337.241389] do_serror+0x3c/0x74
[ 337.241392] el1h_64_error_handler+0x30/0x48
[ 337.241400] el1h_64_error+0x6c/0x70
[ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P)
[ 337.241410] irq_thread_fn+0x2c/0xb0
[ 337.241416] irq_thread+0x170/0x334
[ 337.241421] kthread+0x12c/0x210
[ 337.241428] ret_from_fork+0x10/0x20
[ 337.241434] SMP: stopping secondary CPUs
[ 337.241451] Kernel Offset: disabled
[ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b
[ 337.241456] Memory Limit: none
[ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: fix multishot recv missing EOF on wakeup race
When a socket send and shutdown() happen back-to-back, both fire
wake-ups before the receiver's task_work has a chance to run. The first
wake gets poll ownership (poll_refs=1), and the second bumps it to 2.
When io_poll_check_events() runs, it calls io_poll_issue() which does a
recv that reads the data and returns IOU_RETRY. The loop then drains all
accumulated refs (atomic_sub_return(2) -> 0) and exits, even though only
the first event was consumed. Since the shutdown is a persistent state
change, no further wakeups will happen, and the multishot recv can hang
forever.
Check specifically for HUP in the poll loop, and ensure that another
loop is done to check for status if more than a single poll activation
is pending. This ensures we don't lose the shutdown event. |
| The WP Travel Engine – Tour Booking Plugin – Tour Operator Software plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'wte_trip_tax' shortcode in all versions up to, and including, 6.7.5 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter] |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/bus: Fix potential use after free in asynchronous initialization
Dingisoul with KASAN reports a use after free if device_add() fails in
nd_async_device_register().
Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while
scheduling async init") correctly added a reference on the parent device
to be held until asynchronous initialization was complete. However, if
device_add() results in an allocation failure the ref count of the
device drops to 0 prior to the parent pointer being accessed. Thus
resulting in use after free.
The bug bot AI correctly identified the fix. Save a reference to the
parent pointer to be used to drop the parent reference regardless of the
outcome of device_add(). |
| Budibase is an open-source low-code platform. Prior to version 3.23.25, a business logic vulnerability exists in Budibase’s password reset functionality due to the absence of rate limiting, CAPTCHA, or abuse prevention mechanisms on the “Forgot Password” endpoint. An unauthenticated attacker can repeatedly trigger password reset requests for the same email address, resulting in hundreds of password reset emails being sent in a short time window. This enables large-scale email flooding, user harassment, denial of service (DoS) against user inboxes, and potential financial and reputational impact for Budibase. This issue has been patched in version 3.23.25. |
| immich is a high performance self-hosted photo and video management solution. Prior to version 2.6.0, the Immich application is vulnerable to credential disclosure when a user authenticates to a shared album. During the authentication process, the application transmits the album password within the URL query parameters in a GET request to /api/shared-links/me. This exposes the password in browser history, proxy and server logs, and referrer headers, allowing unintended disclosure of authentication credentials. The impact of this vulnerability is the potential compromise of shared album access and unauthorized exposure of sensitive user data. This issue has been patched in version 2.6.0. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8, apps that register an asynchronous session.setPermissionRequestHandler() may be vulnerable to a use-after-free when handling fullscreen, pointer-lock, or keyboard-lock permission requests. If the requesting frame navigates or the window closes while the permission handler is pending, invoking the stored callback dereferences freed memory, which may lead to a crash or memory corruption. Apps that do not set a permission request handler, or whose handler responds synchronously, are not affected. This issue has been patched in versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8. |
| Cloudreve is a self-hosted file management and sharing system. Prior to version 4.13.0, the application uses the weak pseudo-random number generator math/rand seeded with time.Now().UnixNano() to generate critical security secrets, including the secret_key, and hash_id_salt. These secrets are generated upon first startup and persisted in the database. An attacker can exploit this by obtaining the administrator's account creation time (via public API endpoints) to narrow the search window for the PRNG seed, and use known hashid to validate the seed. By brute-forcing the seed (demonstrated to take <3 hours on general consumer PC), an attacker can predict the secret_key. This allows them to forge valid JSON Web Tokens (JWTs) for any user, including administrators, leading to full account takeover and privilege escalation. This issue has been patched in version 4.13.0. |
| Zulip is an open-source team collaboration tool. Prior to version 11.6, Zulip is an open-source team collaboration tool. From version 1.4.0 to before version 11.6, even after spectator access (enable_spectator_access / WEB_PUBLIC_STREAMS_ENABLED) is disabled, attachments originating from web-public streams can still be retrieved anonymously. As a result, file contents remain accessible even after public access is intended to be disabled. Similarly, even after spectator access is disabled, the /users/me/<stream_id>/topics endpoint remains reachable anonymously, allowing retrieval of topic history for web-public streams. This issue has been patched in version 11.6. This issue has been patched in version 11.6. |
| The ElementsKit Elementor Addons and Templates plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'ekit_tab_title' parameter in the Simple Tab widget in all versions up to, and including, 3.7.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Zulip is an open-source team collaboration tool. From version 1.4.0 to before version 11.6, ./manage.py import reads arbitrary files from the server filesystem via path traversal in uploads/records.json. A crafted export tarball causes the server to copy any file the zulip user can read into the uploads directory during import. This issue has been patched in version 11.6. |
| A flaw was found in rust-rpm-sequoia. An attacker can exploit this vulnerability by providing a specially crafted Red Hat Package Manager (RPM) file. During the RPM signature verification process, this crafted file can trigger an error in the OpenPGP signature parsing code, leading to an unconditional termination of the rpm process. This issue results in an application level denial of service, making the system unable to process RPM files for signature verification. |
| FastMCP is the standard framework for building MCP applications. Prior to version 3.2.0, while testing the GitHubProvider OAuth integration, which allows authentication to a FastMCP MCP server via a FastMCP OAuthProxy using GitHub OAuth, it was discovered that the FastMCP OAuthProxy does not properly validate the user's consent upon receiving the authorization code from GitHub. In combination with GitHub’s behavior of skipping the consent page for previously authorized clients, this introduces a Confused Deputy vulnerability. This issue has been patched in version 3.2.0. |
| util-linux is a random collection of Linux utilities. Prior to version 2.41.4, a TOCTOU (Time-of-Check-Time-of-Use) vulnerability has been identified in the SUID binary /usr/bin/mount from util-linux. The mount binary, when setting up loop devices, validates the source file path with user privileges via fork() + setuid() + realpath(), but subsequently re-canonicalizes and opens it with root privileges (euid=0) without verifying that the path has not been replaced between both operations. Neither O_NOFOLLOW, nor inode comparison, nor post-open fstat() are employed. This allows a local unprivileged user to replace the source file with a symlink pointing to any root-owned file or device during the race window, causing the SUID binary to open and mount it as root. Exploitation requires an /etc/fstab entry with user,loop options whose path points to a directory where the attacker has write permission, and that /usr/bin/mount has the SUID bit set (the default configuration on virtually all Linux distributions). The impact is unauthorized read access to root-protected files and block devices, including backup images, disk volumes, and any file containing a valid filesystem. This issue has been patched in version 2.41.4. |
| Piwigo is an open source photo gallery application for the web. Prior to version 16.3.0, the pwg.history.search API method in Piwigo is registered without the admin_only option, allowing unauthenticated users to access the full browsing history of all gallery visitors. This issue has been patched in version 16.3.0. |
