| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios
__folio_split() keeps dereferencing the mapping after the split:
shmem_uncharge(mapping->host) and remap_page() while the folios are still
frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the
after-split folios have been unlocked and freed.
Nothing holds an inode reference across that. The split relies on @folio
-- which the beyond-EOF drop loop never removes, as it starts at
folio_next(folio) -- staying locked and in the page cache to hold off
eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read()
runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure()
passes when splitting a poisoned tail of a shmem THP that reaches past
i_size during truncation, it too is gone from the page cache; so once
@folio is unlocked no locked, in-cache folio pins the inode, and a
concurrent final iput() can evict and RCU-free it before
i_mmap_unlock_read() touches i_mmap_rwsem:
BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790
i_mmap_unlock_read include/linux/fs.h:537 [inline]
__folio_split+0x732/0x1640 mm/huge_memory.c:4100
try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675
memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470
Freed by task 4601:
shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177
evict+0x57f/0xac0 fs/inode.c:870
Do every mapping dereference while @folio still pins the inode: drop
i_mmap_rwsem right after remap_page(), before the loop that unlocks and
frees the after-split folios, and clear @mapping so the exit path does not
unlock it again. shmem_uncharge() and remap_page() already run before
that point, so after this nothing past the unlock loop touches the inode
or the mapping.
This is now a rule the split depends on, alongside keeping @folio frozen
until the page cache is updated: no inode or mapping dereference once the
after-split folios start being unlocked. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix tid_tx use-after-free on BA session stop
ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through
ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping
sta->lock:
ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */
...
spin_unlock_bh(&sta->lock);
if (start_txq)
ieee80211_agg_start_txq(sta, tid, false);
if (send_delba)
ieee80211_send_delba(..., tid_tx->ndp);
That read is not covered by an RCU read-side critical section, and it runs
in preemptible process context: both callers hold the wiphy mutex, reaching
it either from the ieee80211_ba_session_work() wiphy work or from
ieee80211_sta_tear_down_BA_sessions() during station teardown.
Softirqs can run in that window too, both from the local_bh_enable() that
ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU
callback can free tid_tx before the read.
Driving the function from a test module with the grace period forced into
that window, KASAN reports the read, and the free arrives on the ordinary
RCU softirq path:
BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400
Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10
[...]
Freed by task 57:
__kasan_slab_free+0x47/0x70
__rcu_free_sheaf_prepare+0x70/0x250
rcu_free_sheaf_nobarn+0x18/0x40
rcu_core+0x426/0x1310
handle_softirqs+0x144/0x590
__irq_exit_rcu+0xea/0x150
irq_exit_rcu+0x9/0x20
sysvec_apic_timer_interrupt+0x6b/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
send_delba is only set when tx_stop is set, which happens for
AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown -
session idle timeout, PTK rekey, suspend, HW reconfig - and not from a
peer's DELBA.
Read ndp into a local before the session is freed, while sta->lock is still
held. tid_tx->ndp has a single writer, in
ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here:
both paths are serialised by the wiphy mutex, and the session is already
marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only
tid_tx dereference left after ieee80211_remove_tid_tx() in this function.
[move/change the comment a bit to be more general not just on ndp,
initialize ndp directly] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
... |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: prevent unbounded recursion in free path with new kmalloc type
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-
---truncated--- |
| Improper access control in Azure API Management (APIM) allows an authorized attacker to execute code over a network. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation.
A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().
We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b. |
| IBM Sterling B2B Integrator 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.2.2.0 through 6.2.2.0_1 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: rtc: tear down old virtqueues before restore
virtio_device_restore() resets the device and restores the negotiated
features before calling ->restore(). viortc_freeze() intentionally
leaves the existing virtqueues in place so the alarm queue can still
wake the system, but viortc_restore() immediately calls
viortc_init_vqs() without first deleting those old queues.
If virtqueue reinitialization fails on virtio-pci, the transport error
path can run vp_del_vqs() against a newly allocated vp_dev->vqs array
while vdev->vqs still contains the old virtqueues. vp_del_vqs() then
looks up queue state through the new array and can dereference a NULL
info pointer in vp_del_vq(), crashing the guest kernel during restore.
This can also happen during a non-faulty reinitialization, when one of
the vp_find_vqs_msix() attempts is unsuccessful before a later attempt
would succeed.
Delete the stale virtqueues before rebuilding them. If restore fails
before virtio_device_ready(), reuse the remove path to stop the device.
Once the device is ready, return errors directly instead of deleting the
virtqueues again. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: do not configure xps for XDP queues
netif_set_xps_queue() should not be called for an XDP Tx queue, since such
queues are not netdev-exposed. On systems with number of CPUs >=64, on E610
adapter, netdev is configured with maximum number queue pairs being 63
(due to MSI-X assignment), but configuring XDP results in 64 XDP queues.
So, during XDP program load, when netif_set_xps_queue() is called for the
last XDP queue, we get a WARNING with a call trace and KASAN report
afterwards (if enabled).
[ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668
[...]
[ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40
[ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84
[ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246
[ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488
[ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000
[ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8
[ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8
[ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000
[ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0
[ 2012.700077] PKRU: 55555554
[ 2012.700080] Call Trace:
[ 2012.700084] <TASK>
[ 2012.700087] ? ktime_get+0x61/0x150
[ 2012.700097] ? usleep_range_state+0x133/0x1b0
[ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10
[ 2012.700114] netif_set_xps_queue+0x31/0x50
[ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe]
[...]
[ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe]
[...]
[ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40
[ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668
Skip XPS configuration for XDP Tx queues. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix endpoint/socket association handling
Disassociating a socket from an endpoint via siw_socket_disassoc() may
release the last reference on that endpoint and free it. Therefore, don't
clear the endpoints socket pointer after calling that function, but
within.
This fixes a:
BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075)
which occurred after processing a malformed MPA request during connection
establishment, causing the new endpoint to be closed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix RB-tree corruption in probe error path
The info->node RB-tree member is zero-initialized via kzalloc. If
a device does not support ATS, the device_rbtree_insert() call is
skipped. If a subsequent probe step fails, the error path jumps to
device_rbtree_remove(), which misinterprets the zeroed node as
a tree root and corrupts the device RB-tree.
Fix this by explicitly initializing the RB-node as empty using
RB_CLEAR_NODE() during initialization and guarding the removal with
RB_EMPTY_NODE(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes
snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD
and returns early when the flag is already set, but the flag is never
cleared again. A completed close ends in remove_slave_links(), which
leaves timeri->timer NULL, so a second close is already harmless through
the timer == NULL path; the early return can only be reached by an
instance that was opened again in between. For such an instance the
close unlinks nothing, so snd_timer_instance_free() frees an object that
is still on timer->open_list_head, still on snd_timer_master_list if it
was opened with a slave key, still owns any adopted slaves, and still
holds its timer and module references.
snd_seq_timer_open() reopens an instance exactly like that: it retries
its fallback open on the same object after a failure that has already
run snd_timer_close_locked() internally. An unprivileged user with
access to /dev/snd/timer and /dev/snd/seq can force that failure, since
snd_timer_check_master() returns -EBUSY when a pending slave matches the
new master's (slave_class, slave_id) key and the target timer has
reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class =
SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a
sequencer queue's key can be forged. The freed instance is afterwards
dereferenced by any further snd_timer_open() on that timer, by
snd_timer_check_slave(), and by /proc/asound/timers, which faults on the
stale ti->owner pointer.
The flag only has to be visible while the close is in progress, which is
all its other users need. Clear it in remove_slave_links(), under the
same timer->lock that sets it, once the instance is off every list. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix UAF when sending a message
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: validate numbered report payloads
When hidp_get_raw_report() waits for a numbered report,
hidp_process_data() compares the expected report number with skb->data[0].
A connected HIDP peer can reply with only a DATA transaction header,
leaving the skb empty after the header is removed.
KMSAN reports an uninitialized-value use in hidp_session_run(), with the
value originating in __alloc_skb() through vhci_write(). The transaction
header checks remove the empty-frame reports, but this report remains until
the payload check is added.
The comparison can also consume a peer-controlled byte beyond the declared
L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made
the current code accept that byte as report ID 1 and complete
HIDIOCGFEATURE with a zero-byte result. With this change the malformed
response is rejected with -EIO, while a subsequent valid response still
succeeds.
Require a payload byte before comparing a numbered report ID. Unnumbered
reports continue to accept an empty payload. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __close_file_table_ids()
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
