| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
__input_process_payload() stores first_skb into xtfs->ra_newskb under
drop_lock when starting partial reassembly, then unlocks and breaks out
of the processing loop. The post-loop check reads xtfs->ra_newskb
without the lock to decide whether first_skb is still owned:
if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb)
Between spin_unlock and this read, a concurrent CPU running
iptfs_reassem_cont() (or the drop_timer hrtimer) can complete
reassembly, NULL xtfs->ra_newskb, and free the skb. The check then
evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb
operate on the freed skb — a use-after-free in skbuff_head_cache.
Replace the unlocked read with a local bool that records whether
first_skb was handed to the reassembly state in the current call. The
flag is set after the existing spin_unlock, before the break, using the
pointer equality that is stable at that point (first_skb == skb iff
first_skb was stored in ra_newskb). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_tunnel: fix use-after-free on object destroy
nft_tunnel_obj_destroy() calls metadata_dst_free() which directly
kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets
that took a reference via dst_hold() in nft_tunnel_obj_eval() and
are still queued (e.g. in a netem qdisc) are left with a dangling
pointer. When these packets are eventually dequeued, dst_release()
operates on freed memory.
Replace metadata_dst_free() with dst_release() so the metadata_dst
is freed only after all references are dropped. The dst subsystem
already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL
A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on
conn->async_requests via setup_async_work(), with cancel_fn =
smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock.
When the request is cancelled, the worker frees the file_lock with
locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never
reaches release_async_work() -- the only site that unlinks the work from
conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays
matchable on async_requests with a live cancel_fn pointing at the freed file_lock,
until connection teardown finally runs release_async_work().
smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second
SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs
smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (cancelled branch)
... cache file_lock_cache of size 192
Reproduced on mainline with KASAN by an authenticated SMB client.
Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback
cannot be fired a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix use-after-free race in fastrpc_map_create
fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The
caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)
on this unprotected pointer. A concurrent MEM_UNMAP can free the map
between the lock release and the kref operation, resulting in a
use-after-free on the freed slab object.
Restore the take_ref parameter to fastrpc_map_lookup so the reference
is acquired atomically under fl->lock before the pointer is exposed to
the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix mm lifecycle in open-coded task_vma iterator
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted" |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec2 - prevent req used-after-free for sec
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: add some missing log locking
Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(),
gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,
but these functions require exclusion against concurrent transactions.
To fix that, add a non-locking __gfs2_log_flush() function. Then, in
gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log
flushing functions and __gfs2_log_flush(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...
[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.
[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Take state lock for af_unix iter
When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.
CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
sock_hold(sk_pair) // UaF
More practically, this fix guarantees that the iterator program is
consistently provided with a unix socket that remains stable during
iterator execution.
[1]:
BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490
Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x170/0x4f3
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x155/0x490
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x63/0x80
kmem_cache_alloc_noprof+0x1d5/0x680
sk_prot_alloc+0x59/0x210
sk_alloc+0x34/0x470
unix_create1+0x86/0x8a0
unix_stream_connect+0x318/0x15b0
__sys_connect+0xfd/0x130
__x64_sys_connect+0x72/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x47/0x70
kmem_cache_free+0x11c/0x590
__sk_destruct+0x432/0x6e0
unix_release_sock+0x9b3/0xf60
unix_release+0x8a/0xf0
__sock_release+0xb0/0x270
sock_close+0x18/0x20
__fput+0x36e/0xac0
fput_close_sync+0xe5/0x1a0
__x64_sys_close+0x7d/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection. |
| In the Linux kernel, the following vulnerability has been resolved:
um: Fix potential race condition in TLB sync
During the TLB sync, we need to traverse and modify the page table,
so we should hold the page table lock. Since full SMP support for
threads within the same process is still missing, let's disable the
split page table lock for simplicity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix double-free in tipc_buf_append()
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations. |
