| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix uaf for flush rq while iterating tags
blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by
checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared
in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in
atomic mode after del_gendisk"), hence for disk like scsi, following
blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well,
cause following uaf that is found by our syzkaller for v6.6:
==================================================================
BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261
Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909
CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364
print_report+0x3e/0x70 mm/kasan/report.c:475
kasan_report+0xb8/0xf0 mm/kasan/report.c:588
blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261
bt_iter block/blk-mq-tag.c:288 [inline]
__sbitmap_for_each_set include/linux/sbitmap.h:295 [inline]
sbitmap_for_each_set include/linux/sbitmap.h:316 [inline]
bt_for_each+0x455/0x790 block/blk-mq-tag.c:325
blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534
blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673
process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631
process_scheduled_works kernel/workqueue.c:2704 [inline]
worker_thread+0x804/0xe40 kernel/workqueue.c:2785
kthread+0x346/0x450 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293
Allocated by task 942:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc mm/kasan/common.c:383 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node+0x69/0x170 mm/slab_common.c:1014
kmalloc_node include/linux/slab.h:620 [inline]
kzalloc_node include/linux/slab.h:732 [inline]
blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499
blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788
blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261
blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294
blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350
blk_mq_init_queue_data block/blk-mq.c:4166 [inline]
blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176
scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335
scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189
__scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727
scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline]
scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791
scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844
scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151
store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191
dev_attr_store+0x5c/0x90 drivers/base/core.c:2388
sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338
call_write_iter include/linux/fs.h:2083 [inline]
new_sync_write+0x1b4/0x2d0 fs/read_write.c:493
vfs_write+0x76c/0xb00 fs/read_write.c:586
ksys_write+0x127/0x250 fs/read_write.c:639
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Freed by task 244687:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
__kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:164 [in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/bluefield: Fix potential integer overflow
The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx
left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as
32-bits wide the left-shift operation truncates the upper 16 bits of
information during the calculation of the SMC argument.
The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any
potential integer overflow, i.e. loss of data from upper 16 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
Fix a kernel crash with the below call trace when the SCPI firmware
returns OPP count of zero.
dvfs_info.opp_count may be zero on some platforms during the reboot
test, and the kernel will crash after dereferencing the pointer to
kcalloc(info->count, sizeof(*opp), GFP_KERNEL).
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
| Mem abort info:
| ESR = 0x96000004
| Exception class = DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c
| [0000000000000028] pgd=0000000000000000
| Internal error: Oops: 96000004 [#1] SMP
| scpi-hwmon: probe of PHYT000D:00 failed with error -110
| Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c)
| CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1
| Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS
| pstate: 60000005 (nZCv daif -PAN -UAO)
| pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi]
| lr : clk_register+0x438/0x720
| Call trace:
| scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi]
| devm_clk_hw_register+0x50/0xa0
| scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi]
| scpi_clocks_probe+0x528/0x70c [clk_scpi]
| platform_drv_probe+0x58/0xa8
| really_probe+0x260/0x3d0
| driver_probe_device+0x12c/0x148
| device_driver_attach+0x74/0x98
| __driver_attach+0xb4/0xe8
| bus_for_each_dev+0x88/0xe0
| driver_attach+0x30/0x40
| bus_add_driver+0x178/0x2b0
| driver_register+0x64/0x118
| __platform_driver_register+0x54/0x60
| scpi_clocks_driver_init+0x24/0x1000 [clk_scpi]
| do_one_initcall+0x54/0x220
| do_init_module+0x54/0x1c8
| load_module+0x14a4/0x1668
| __se_sys_finit_module+0xf8/0x110
| __arm64_sys_finit_module+0x24/0x30
| el0_svc_common+0x78/0x170
| el0_svc_handler+0x38/0x78
| el0_svc+0x8/0x340
| Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820)
| ---[ end trace 06feb22469d89fa8 ]---
| Kernel panic - not syncing: Fatal exception
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x10,a0002008
| Memory Limit: none |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___slab_alloc+0x12ef/0x35e0
kmem_cache_alloc_bulk_noprof+0x486/0x1330
__io_alloc_req_refill+0x84/0x560
io_submit_sqes+0x172f/0x2f30
__se_sys_io_uring_enter+0x406/0x41c0
__x64_sys_io_uring_enter+0x11f/0x1a0
x64_sys_call+0x2b54/0x3ba0
do_syscall_64+0xcd/0x1e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Since an instance of 'struct kiocb' may be passed from the block layer
with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()'
and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in
'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: clk-apple-nco: Add NULL check in applnco_probe
Add NULL check in applnco_probe, to handle kernel NULL pointer
dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
um: Fix potential integer overflow during physmem setup
This issue happens when the real map size is greater than LONG_MAX,
which can be easily triggered on UML/i386. |
| In the Linux kernel, the following vulnerability has been resolved:
initramfs: avoid filename buffer overrun
The initramfs filename field is defined in
Documentation/driver-api/early-userspace/buffer-format.rst as:
37 cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data
...
55 ============= ================== =========================
56 Field name Field size Meaning
57 ============= ================== =========================
...
70 c_namesize 8 bytes Length of filename, including final \0
When extracting an initramfs cpio archive, the kernel's do_name() path
handler assumes a zero-terminated path at @collected, passing it
directly to filp_open() / init_mkdir() / init_mknod().
If a specially crafted cpio entry carries a non-zero-terminated filename
and is followed by uninitialized memory, then a file may be created with
trailing characters that represent the uninitialized memory. The ability
to create an initramfs entry would imply already having full control of
the system, so the buffer overrun shouldn't be considered a security
vulnerability.
Append the output of the following bash script to an existing initramfs
and observe any created /initramfs_test_fname_overrunAA* path. E.g.
./reproducer.sh | gzip >> /myinitramfs
It's easiest to observe non-zero uninitialized memory when the output is
gzipped, as it'll overflow the heap allocated @out_buf in __gunzip(),
rather than the initrd_start+initrd_size block.
---- reproducer.sh ----
nilchar="A" # change to "\0" to properly zero terminate / pad
magic="070701"
ino=1
mode=$(( 0100777 ))
uid=0
gid=0
nlink=1
mtime=1
filesize=0
devmajor=0
devminor=1
rdevmajor=0
rdevminor=0
csum=0
fname="initramfs_test_fname_overrun"
namelen=$(( ${#fname} + 1 )) # plus one to account for terminator
printf "%s%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%s" \
$magic $ino $mode $uid $gid $nlink $mtime $filesize \
$devmajor $devminor $rdevmajor $rdevminor $namelen $csum $fname
termpadlen=$(( 1 + ((4 - ((110 + $namelen) & 3)) % 4) ))
printf "%.s${nilchar}" $(seq 1 $termpadlen)
---- reproducer.sh ----
Symlink filename fields handled in do_symlink() won't overrun past the
data segment, due to the explicit zero-termination of the symlink
target.
Fix filename buffer overrun by aborting the initramfs FSM if any cpio
entry doesn't carry a zero-terminator at the expected (name_len - 1)
offset. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: add missing range check in bitmap_ip_uadt
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: page_alloc: move mlocked flag clearance into free_pages_prepare()
Syzbot reported a bad page state problem caused by a page being freed
using free_page() still having a mlocked flag at free_pages_prepare()
stage:
BUG: Bad page state in process syz.5.504 pfn:61f45
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x61f45
flags: 0xfff00000080204(referenced|workingset|mlocked|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000080204 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), pid 8443, tgid 8442 (syz.5.504), ts 201884660643, free_ts 201499827394
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1537
prep_new_page mm/page_alloc.c:1545 [inline]
get_page_from_freelist+0x303f/0x3190 mm/page_alloc.c:3457
__alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4733
alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
kvm_coalesced_mmio_init+0x1f/0xf0 virt/kvm/coalesced_mmio.c:99
kvm_create_vm virt/kvm/kvm_main.c:1235 [inline]
kvm_dev_ioctl_create_vm virt/kvm/kvm_main.c:5488 [inline]
kvm_dev_ioctl+0x12dc/0x2240 virt/kvm/kvm_main.c:5530
__do_compat_sys_ioctl fs/ioctl.c:1007 [inline]
__se_compat_sys_ioctl+0x510/0xc90 fs/ioctl.c:950
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0xb4/0x110 arch/x86/entry/common.c:386
do_fast_syscall_32+0x34/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
page last free pid 8399 tgid 8399 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1108 [inline]
free_unref_folios+0xf12/0x18d0 mm/page_alloc.c:2686
folios_put_refs+0x76c/0x860 mm/swap.c:1007
free_pages_and_swap_cache+0x5c8/0x690 mm/swap_state.c:335
__tlb_batch_free_encoded_pages mm/mmu_gather.c:136 [inline]
tlb_batch_pages_flush mm/mmu_gather.c:149 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:366 [inline]
tlb_flush_mmu+0x3a3/0x680 mm/mmu_gather.c:373
tlb_finish_mmu+0xd4/0x200 mm/mmu_gather.c:465
exit_mmap+0x496/0xc40 mm/mmap.c:1926
__mmput+0x115/0x390 kernel/fork.c:1348
exit_mm+0x220/0x310 kernel/exit.c:571
do_exit+0x9b2/0x28e0 kernel/exit.c:926
do_group_exit+0x207/0x2c0 kernel/exit.c:1088
__do_sys_exit_group kernel/exit.c:1099 [inline]
__se_sys_exit_group kernel/exit.c:1097 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1097
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Modules linked in:
CPU: 0 UID: 0 PID: 8442 Comm: syz.5.504 Not tainted 6.12.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
bad_page+0x176/0x1d0 mm/page_alloc.c:501
free_page_is_bad mm/page_alloc.c:918 [inline]
free_pages_prepare mm/page_alloc.c:1100 [inline]
free_unref_page+0xed0/0xf20 mm/page_alloc.c:2638
kvm_destroy_vm virt/kvm/kvm_main.c:1327 [inline]
kvm_put_kvm+0xc75/0x1350 virt/kvm/kvm_main.c:1386
kvm_vcpu_release+0x54/0x60 virt/kvm/kvm_main.c:4143
__fput+0x23f/0x880 fs/file_table.c:431
task_work_run+0x24f/0x310 kernel/task_work.c:239
exit_task_work include/linux/task_work.h:43 [inline]
do_exit+0xa2f/0x28e0 kernel/exit.c:939
do_group_exit+0x207/0x2c0 kernel/exit.c:1088
__do_sys_exit_group kernel/exit.c:1099 [in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix potential invalid memory access in igb_init_module()
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
ip_tunnel_find+0x435/0x4d0
ip_tunnel_newlink+0x517/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix crash when config small gso_max_size/gso_ipv4_max_size
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't call cleanup on profile rollback failure
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
<snipped>
[ 745.551290] Call Trace:
[ 745.551590] <TASK>
[ 745.551866] ? __die+0x20/0x60
[ 745.552218] ? page_fault_oops+0x150/0x400
[ 745.555307] ? exc_page_fault+0x79/0x240
[ 745.555729] ? asm_exc_page_fault+0x22/0x30
[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[ 745.556698] auxiliary_bus_remove+0x18/0x30
[ 745.557134] device_release_driver_internal+0x1df/0x240
[ 745.557654] bus_remove_device+0xd7/0x140
[ 745.558075] device_del+0x15b/0x3c0
[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]
[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]
[ 745.560694] pci_device_remove+0x39/0xa0
[ 745.561112] device_release_driver_internal+0x1df/0x240
[ 745.561631] driver_detach+0x47/0x90
[ 745.562022] bus_remove_driver+0x84/0x100
[ 745.562444] pci_unregister_driver+0x3b/0x90
[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]
[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0
[ 745.563886] ? kmem_cache_free+0x1b0/0x460
[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190
[ 745.564825] do_syscall_64+0x6d/0x140
[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 745.565725] RIP: 0033:0x7f1579b1288b |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: Add cancel_work_sync before module remove
If we remove the module which will call mpc52xx_spi_remove
it will free 'ms' through spi_unregister_controller.
while the work ms->work will be used. The sequence of operations
that may lead to a UAF bug.
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in mpc52xx_spi_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix integer overflow in BLKSECDISCARD
I independently rediscovered
commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155
block: fix overflow in blk_ioctl_discard()
but for secure erase.
Same problem:
uint64_t r[2] = {512, 18446744073709551104ULL};
ioctl(fd, BLKSECDISCARD, r);
will enter near infinite loop inside blkdev_issue_secure_erase():
a.out: attempt to access beyond end of device
loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048
bio_check_eod: 3286214 callbacks suppressed |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: avoid NULL pointer dereference
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn30_init_hw
This commit addresses a potential null pointer dereference issue in the
`dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628) |
