| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Linux |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/gem: Fix error code msm_parse_deps()
The SUBMIT_ERROR() macro turns the error code negative. This extra '-'
operation turns it back to positive EINVAL again. The error code is
passed to ERR_PTR() and since positive values are not an IS_ERR() it
eventually will lead to an oops. Delete the '-'.
Patchwork: https://patchwork.freedesktop.org/patch/637625/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set()
Instead of attempting the same mutex twice, lock and unlock it.
This bug has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init
devm_kasprintf() calls can return null pointers on failure.
But some return values were not checked in zynqmp_audio_init().
Add NULL check in zynqmp_audio_init(), avoid referencing null
pointers in the subsequent code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix Tx L4 checksum
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid panic once fallocation fails for pinfile
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2746!
CPU: 0 UID: 0 PID: 5323 Comm: syz.0.0 Not tainted 6.13.0-rc2-syzkaller-00018-g7cb1b4663150 #0
RIP: 0010:get_new_segment fs/f2fs/segment.c:2746 [inline]
RIP: 0010:new_curseg+0x1f52/0x1f70 fs/f2fs/segment.c:2876
Call Trace:
<TASK>
__allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3210
f2fs_allocate_new_section fs/f2fs/segment.c:3224 [inline]
f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3238
f2fs_expand_inode_data+0x696/0xca0 fs/f2fs/file.c:1830
f2fs_fallocate+0x537/0xa10 fs/f2fs/file.c:1940
vfs_fallocate+0x569/0x6e0 fs/open.c:327
do_vfs_ioctl+0x258c/0x2e40 fs/ioctl.c:885
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0x80/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent pinfile allocation may run out of free section, result in
panic in get_new_segment(), let's expand pin_sem lock coverage to
include f2fs_gc(), so that we can make sure to reclaim enough free
space for following allocation.
In addition, do below changes to enhance error path handling:
- call f2fs_bug_on() only in non-pinfile allocation path in
get_new_segment().
- call reset_curseg_fields() to reset all fields of curseg in
new_curseg() |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
During a module removal, kvm_exit invokes arch specific disable
call which disables AIA. However, we invoke aia_exit before kvm_exit
resulting in the following warning. KVM kernel module can't be inserted
afterwards due to inconsistent state of IRQ.
[25469.031389] percpu IRQ 31 still enabled on CPU0!
[25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150
[25469.031804] Modules linked in: kvm(-)
[25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2
[25469.031905] Hardware name: riscv-virtio,qemu (DT)
[25469.031928] epc : __free_percpu_irq+0xa2/0x150
[25469.031976] ra : __free_percpu_irq+0xa2/0x150
[25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50
[25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8
[25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90
[25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00
[25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8
[25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10
[25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f
[25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000
[25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0
[25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7
[25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7
[25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003
[25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150
[25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e
[25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm]
[25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm]
[25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc
[25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46
[25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134
[25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156
Invoke aia_exit and other arch specific cleanup functions after kvm_exit
so that disable gets a chance to be called first before exit. |
| In the Linux kernel, the following vulnerability has been resolved:
watch_queue: fix pipe accounting mismatch
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?) |
| A flaw was found in the Linux kernel, where unauthorized access to the execution of the setuid file with capabilities was found in the Linux kernel’s OverlayFS subsystem in how a user copies a capable file from a nosuid mount into another mount. This uid mapping bug allows a local user to escalate their privileges on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format
This can lead to out of bounds writes since frames of this type were not
taken into account when calculating the size of the frames buffer in
uvc_parse_streaming. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints".
This series fixes null pointer dereference bugs that occur when using
nilfs2 and two block-related tracepoints.
This patch (of 2):
It has been reported that when using "block:block_touch_buffer"
tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a
NULL pointer dereference, or a general protection fault when KASAN is
enabled.
This happens because since the tracepoint was added in touch_buffer(), it
references the dev_t member bh->b_bdev->bd_dev regardless of whether the
buffer head has a pointer to a block_device structure. In the current
implementation, the block_device structure is set after the function
returns to the caller.
Here, touch_buffer() is used to mark the folio/page that owns the buffer
head as accessed, but the common search helper for folio/page used by the
caller function was optimized to mark the folio/page as accessed when it
was reimplemented a long time ago, eliminating the need to call
touch_buffer() here in the first place.
So this solves the issue by eliminating the touch_buffer() call itself. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty()
may cause a NULL pointer dereference, or a general protection fault when
KASAN is enabled.
This happens because, since the tracepoint was added in
mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev
regardless of whether the buffer head has a pointer to a block_device
structure.
In the current implementation, nilfs_grab_buffer(), which grabs a buffer
to read (or create) a block of metadata, including b-tree node blocks,
does not set the block device, but instead does so only if the buffer is
not in the "uptodate" state for each of its caller block reading
functions. However, if the uptodate flag is set on a folio/page, and the
buffer heads are detached from it by try_to_free_buffers(), and new buffer
heads are then attached by create_empty_buffers(), the uptodate flag may
be restored to each buffer without the block device being set to
bh->b_bdev, and mark_buffer_dirty() may be called later in that state,
resulting in the bug mentioned above.
Fix this issue by making nilfs_grab_buffer() always set the block device
of the super block structure to the buffer head, regardless of the state
of the buffer's uptodate flag. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: vop: Fix a dereferenced before check warning
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: error out earlier on disconnect
Eric reported a division by zero splat in the MPTCP protocol:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted
6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163
Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8
0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c
24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89
RSP: 0018:ffffc900041f7930 EFLAGS: 00010293
RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b
RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004
RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67
R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80
R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000
FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493
mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline]
mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289
inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x1b2/0x250 net/socket.c:1073
__sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265
__do_sys_recvfrom net/socket.c:2283 [inline]
__se_sys_recvfrom net/socket.c:2279 [inline]
__x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7feb5d857559
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559
RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000
R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c
R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef
and provided a nice reproducer.
The root cause is the current bad handling of racing disconnect.
After the blamed commit below, sk_wait_data() can return (with
error) with the underlying socket disconnected and a zero rcv_mss.
Catch the error and return without performing any additional
operations on the current socket. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix accept_queue memory leak
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in
alloc_pages_bulk_noprof() when the task is migrated between cpusets.
When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be
¤t->mems_allowed. when first_zones_zonelist() is called to find
preferred_zoneref, the ac->nodemask may be modified concurrently if the
task is migrated between different cpusets. Assuming we have 2 NUMA Node,
when traversing Node1 in ac->zonelist, the nodemask is 2, and when
traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the
ac->preferred_zoneref points to NULL zone.
In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a
allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading
to NULL pointer dereference.
__alloc_pages_noprof() fixes this issue by checking NULL pointer in commit
ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and
commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc
fastpath").
To fix it, check NULL pointer for preferred_zoneref->zone. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: uncache inode which has failed entering the group
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? do_error_trap+0x1dc/0x2c0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? __pfx_do_error_trap+0x10/0x10
? handle_invalid_op+0x34/0x40
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? ocfs2_set_new_buffer_uptodate+0x2e/0x160
? ocfs2_set_new_buffer_uptodate+0x144/0x160
? ocfs2_set_new_buffer_uptodate+0x145/0x160
ocfs2_group_add+0x39f/0x15a0
? __pfx_ocfs2_group_add+0x10/0x10
? __pfx_lock_acquire+0x10/0x10
? mnt_get_write_access+0x68/0x2b0
? __pfx_lock_release+0x10/0x10
? rcu_read_lock_any_held+0xb7/0x160
? __pfx_rcu_read_lock_any_held+0x10/0x10
? smack_log+0x123/0x540
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x226/0x2b0
ocfs2_ioctl+0x65e/0x7d0
? __pfx_ocfs2_ioctl+0x10/0x10
? smack_file_ioctl+0x29e/0x3a0
? __pfx_smack_file_ioctl+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? __pfx_ocfs2_ioctl+0x10/0x10
__se_sys_ioctl+0xfb/0x170
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'. |
| In the Linux kernel, the following vulnerability has been resolved:
hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: krealloc: Fix MTE false alarm in __do_krealloc
This patch addresses an issue introduced by commit 1a83a716ec233 ("mm:
krealloc: consider spare memory for __GFP_ZERO") which causes MTE
(Memory Tagging Extension) to falsely report a slab-out-of-bounds error.
The problem occurs when zeroing out spare memory in __do_krealloc. The
original code only considered software-based KASAN and did not account
for MTE. It does not reset the KASAN tag before calling memset, leading
to a mismatch between the pointer tag and the memory tag, resulting
in a false positive.
Example of the error:
==================================================================
swapper/0: BUG: KASAN: slab-out-of-bounds in __memset+0x84/0x188
swapper/0: Write at addr f4ffff8005f0fdf0 by task swapper/0/1
swapper/0: Pointer tag: [f4], memory tag: [fe]
swapper/0:
swapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.
swapper/0: Hardware name: MT6991(ENG) (DT)
swapper/0: Call trace:
swapper/0: dump_backtrace+0xfc/0x17c
swapper/0: show_stack+0x18/0x28
swapper/0: dump_stack_lvl+0x40/0xa0
swapper/0: print_report+0x1b8/0x71c
swapper/0: kasan_report+0xec/0x14c
swapper/0: __do_kernel_fault+0x60/0x29c
swapper/0: do_bad_area+0x30/0xdc
swapper/0: do_tag_check_fault+0x20/0x34
swapper/0: do_mem_abort+0x58/0x104
swapper/0: el1_abort+0x3c/0x5c
swapper/0: el1h_64_sync_handler+0x80/0xcc
swapper/0: el1h_64_sync+0x68/0x6c
swapper/0: __memset+0x84/0x188
swapper/0: btf_populate_kfunc_set+0x280/0x3d8
swapper/0: __register_btf_kfunc_id_set+0x43c/0x468
swapper/0: register_btf_kfunc_id_set+0x48/0x60
swapper/0: register_nf_nat_bpf+0x1c/0x40
swapper/0: nf_nat_init+0xc0/0x128
swapper/0: do_one_initcall+0x184/0x464
swapper/0: do_initcall_level+0xdc/0x1b0
swapper/0: do_initcalls+0x70/0xc0
swapper/0: do_basic_setup+0x1c/0x28
swapper/0: kernel_init_freeable+0x144/0x1b8
swapper/0: kernel_init+0x20/0x1a8
swapper/0: ret_from_fork+0x10/0x20
================================================================== |
