| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: reject mapping a reserved doorbell to a new queue
When creating an user-queue, the user space
provides a doorbell BO handle and an offset within
the bo to obtain a doorbell.
However current implementation using xa_store_irq()
to store a doorbell, which allows a later queue created
with the same BO and offset parameters to overwrite an
existing queue and doorbell mapping.
This can cause problems like misrouting fence IRQ
processing to a wrong queue, and mislead the cleanup
process of one queue erasing the mapping of another queue.
This commit fixes this issue by replacing xa_store_irq with
xa_insert_irq, which rejects mapping a reserved
doorbell to a newly created queue
(cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: invoke pm_genpd_remove() before freeing genpd
Call pm_genpd_remove() to unregister from global list prior to releasing
acp_genpd memory, and clear the pointer after free.
(cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2) |
| In the Linux kernel, the following vulnerability has been resolved:
pppoe: reload header pointer after dev_hard_header()
pppoe_sendmsg() saves a pointer to the PPPoE header before calling
dev_hard_header(). Device header callbacks are allowed to reallocate the
skb head, invalidating pointers into it.
This can happen when a send is blocked in copy_from_user() while the first
non-Ethernet port is added to an empty team device. The team's delegated
GRE header callback then expands the skb head. PPPoE subsequently writes
six bytes through the stale pointer into the freed head.
Reload the PPPoE header through the skb's network-header offset after
device header creation. pskb_expand_head() updates that offset when it
relocates the head. |
| Metabase allows an authenticated, low-privileged attacker to read the entire Metabase application database. |
| unearth through 0.18.2, fixed in commit 6c78164, contains a path traversal vulnerability in the is_within_directory function that fails to normalize paths before validation, allowing ../ sequences to bypass directory containment checks. Attackers can supply malicious tar archives with symlink members or traversal sequences to write files to arbitrary filesystem locations accessible to the process. |
| SQLBot through 1.10.0, fixed in commit c3f40a5, contains a stored cross-site scripting vulnerability in the SQText dashboard component that renders TinyMCE output via v-html without sanitization. Attackers who can modify dashboard text widget content can inject arbitrary HTML and JavaScript that executes for all users viewing the dashboard. |
| Metabase allows an unauthenticated attacker to inject arbitrary SQL via a publicly shared card or dashboard that exposes a field-filter (dimension) parameter. |
| Metabase allows a remote, unauthenticated attacker to inject arbitrary SQL via the '/reset_password' database endpoint and gain administrator access to the connected Metabase instance. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: write all dirty file folios when collapsing
[There is no upstream commit, as this code was removed by upstream
commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")]
As-is, khugepaged and writable-file opening exclude each other. A file
cannot be open writeable and have THPs (because the filesystem is not aware
of them). khugepaged will never collapse file pages for files that are
opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that
particular file is dropped. This is fine because nothing could've been
dirtied.
However, there is an edge-case: collapse_file() might not be able to
coexist with concurrent writers, but it can coexist with dirty folios
(from previous writers). Therefore, the following can happen:
open(file, O_RDWR)
write(file)
close(file)
madvise(file_mapping, MADV_COLLAPSE, some non-dirty range)
open(file, O_RDWR)
nr_thps > 0
truncate_inode_pages()
/* THPs are cleared out, but so are the dirty folios */
When this edge-case happens, there is data loss, as the dirty folios are
fully discarded.
Fix it by fully writing back the page cache (and waiting) when collapsing
file THPs. Doing so provides the guarantee that no dirty folio will be
observed while there are active THPs. To fully ensure this is safe, the
invalidate_lock needs to be held while doing the writeout, so that
do_dentry_open()'s page cache truncation excludes this write-and-wait.
As a side effect, move the nr_thps counter bumping outside the i_pages
lock. This is correct since the counter itself is an atomic_t and the
producer <-> consumer correctness is provided by a full memory barrier:
smp_mb() in collapse_file()/memory barrier implied by full ordering in
get_write_access() -> atomic_inc_unless_negative(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check to response query
Add variable representations for BufLength and BufOffset in
rndis_query_response(), and perform a length check on them.
This is identical to how rndis_set_response() handles these parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Plug race against a concurrent OOM disable
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places. |
| In the Linux kernel, the following vulnerability has been resolved:
time/jiffies: Register jiffies clocksource before usage
Teddy reported that a XEN HVM has a long boot delay, which was bisected to
the recent enhancements to the negative motion detection. It turned out
that the jiffies clocksource is used in early boot before it is registered,
which leaves the max_delta_raw field at zero. That causes the read out to
be clamped to the max delta of 0, which means time is not making progress.
Cure it by ensuring that it is initialized before its first usage in
timekeeping_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: avoid rereading IB param length
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix Rx queue stall on alloc failure
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet. |
| OP-TEE OS through 4.10.0, fixed in commit 7b8b494, contains a buffer underwrite vulnerability in the RSA NOPAD encrypt and decrypt operations within the mbedTLS software backend and SE050 hardware driver that allows a malicious Trusted Application to corrupt secure-world heap memory by supplying an input length exceeding the RSA modulus size. When src_len exceeds rsa_len, the subtraction expression wraps to a large unsigned value, causing a subsequent memcpy to write attacker-controlled data before the destination buffer in S-EL1 secure-world heap memory. |
| UnixAuth lacks brute-force protection in Apache Ranger versions <= 2.8.0.
Note: UnixAuth is NOT a recommended option for production deployments.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
