| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: block: fix GenDisk cleanup paths
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Support for hardening against JIT spraying
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Enable IBPB flush on BPF JIT allocation
Enable hardening against JIT spraying when Spectre-v2 mitigations are in
use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip
enabling the IBPB flush if the BPF dispatcher is already using a retpoline
sequence.
This hardening applies only when BPF-JIT is in use. Guard the enabling
under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: correct drop logic for malformed AMPDU frames
The previous commit aims to fix issue caused by malformed AMPDU frames.
But the drop logic fails to deal with the first AMPDU packet paired with
certain range of sequence number, and leads to unexpected packet drop.
It is more likely to encounter this failure when there are busy traffic
during rekey process and could lead to disconnection from the AP.
Fix this by adding a initial state judgement and only reset status
during pairwise rekey. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and
disable_one() were called from the out: block while keep_cs_asserted
was still true. This caused any SPI transfer issued by those callbacks
to carry cs_change=1, leaving CS permanently asserted after the
conversion. Fix by moving both calls into the out_unlock: block, after
keep_cs_asserted is cleared, matching the pattern already used in
ad_sd_calibrate().
In the error path of ad_sd_buffer_postenable(), if an operation fails
after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g.
spi_offload_trigger_enable()), the device is left in continuous
conversion mode with CS physically asserted. Additionally,
bus_locked remaining true after spi_bus_unlock() causes subsequent
SPI operations to call spi_sync_locked() without the bus lock actually
held, allowing concurrent SPI access.
Fix the error path by clearing keep_cs_asserted first, then calling
set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS,
then clearing bus_locked before releasing the bus.
For devices that implement neither set_mode nor disable_one (such as
MAX11205, which has no physical CS pin), no SPI transfer is issued
during cleanup and the cs_change flag has no effect on any physical
line. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: lpc32xx: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
lpc32xx_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix PM reference leak in buffer preenable
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: free scan_mask on buffer release
The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer:
hw-consumer: remove redundant scan_mask flexible array").
Before that change, the scan mask storage was embedded in struct
hw_consumer_buffer, so iio_hw_buf_release() could free the whole
allocation with a single kfree(hw_buf).
That commit moved the scan mask to a separate bitmap_zalloc() allocation
stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged.
Free the scan mask in iio_hw_buf_release() before freeing the buffer
wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
Include linux/bitfield.h for FIELD_GET().
Create new macros for bit manipulation in combination with manual bit
manipulation being replaced with FIELD_GET().
The current variable declaration and initializations are barely readable
and use comma separations across multiple lines. Refactor the
initializations so that mantissa and exp have separate declarations and
sign gets initialized later.
In addition (and due to the nature of the cleanup), fix a sign-extension
bug where, float32 would get bitwise anded with ~BIT(31)
(which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: event: Fix event FIFO reset race
`iio_event_getfd()` creates the event file descriptor with
`anon_inode_getfd()`, which allocates a new fd, creates the anonymous
file and installs it in the process fd table before returning to the
caller.
The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,
but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.
But since fd tables are shared between threads, another thread can guess
the newly allocated fd number and issue a `read()` on it as soon as the fd
has been installed.
This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in
parallel with the `kfifo_reset_out()` in `iio_event_getfd()`.
The kfifo documentation says that `kfifo_reset_out()` is only safe when it
is called from the reader thread and there is only one concurrent reader.
Otherwise it is dangerous and must be handled in the same way as
`kfifo_reset()`.
If that happens, `kfifo_to_user()` can advance the FIFO `out` index based
on state from before the reset, after the reset has already moved the `out`
index to the current `in` index. That can leave the FIFO with an `out`
index past the `in` index. A later `read()` can then see an underflowed
FIFO length and copy more data than the event FIFO buffer contains. This
can result in an out-of-bounds read and leak adjacent kernel memory to
userspace.
Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is
marked busy, but the new fd has not been installed yet, so userspace cannot
access it while the FIFO is reset. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry
matching the bw_bits value read from the chip:
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
break;
}
*val = bmg160_samp_freq_table[i].filter;
If no entry matches, i ends up equal to the array size and the next line
reads one slot past the end. bmg160_set_filter() has the same shape, driven
by 'val' instead of bw_bits.
smatch flags both:
drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
Return -EINVAL when no entry matches.
The set_filter() path is reachable from userspace via the sysfs
in_anglvel_filter_low_pass_3db_frequency interface, so userspace can
trivially trigger the out-of-bounds read with a value that is not in
bmg160_samp_freq_table[].filter. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: mpl115: fix runtime PM leak on read error
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: temperature: tmp006: use devm_iio_trigger_register
tmp006_probe() allocates the DRDY trigger with devm_iio_trigger_alloc()
but registers it with plain iio_trigger_register(). The driver has no
.remove() callback, so on module unload the trigger stays in the global
trigger list while its memory is freed by devm, leaving a dangling
entry.
Switch to devm_iio_trigger_register() so the registration is undone in
the same devm scope as the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix work UAF on disconnect
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it. |
