| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation
Computing the effects of a TLB invalidation involves looking at
the size of the mapping cached by the TLB. For S1 mappings such as
VNCR, this is deducted from the combination of the base granule size
and the mapping level.
However, this implies that the S1 MMU is *on*. When the MMU is off,
we indicate this with the level being set to a "creative" value of
-127 (S1_MMU_DISABLED).
This ends-up being misinterpreted by pgshift_level_to_ttl() as it
doesn't handle negative levels at all (the level is immediately cast
to a u8 and only the bottom two bits considered), leading to an
invalidation size of 0. Not helpful.
Tidy-up pgshift_level_to_ttl() to handle these negative levels, and
ttl_to_size() to always return SZ_1G when no valid TTL is present.
This allows the removal of open-coded checks for similar situations.
Note that the check for a negative value not explicitely checking for
S1_MMU_DISABLED is deliberate, so that actual negative levels introduced
with LVA2 and D128 can take the same path if we ever support them. |
| A memory corruption issue was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Tahoe 26.7. Connecting a malicious accessory may cause unexpected system termination. |
| The lack of signature verification of firmware update packages in VEO and VEO-XS Wi-Fi monitors, in versions prior to 01.48.001, allows an attacker who controls the delivery of an update to install unauthorised firmware. |
| The Appointment Hour Booking WordPress plugin before 1.5.95 does not check every appointment in a booking submission against the capacity configured for its own slot, allowing unauthenticated visitors to take slots that are already fully booked. |
| Dell Update Package Framework, versions prior to 26.07.03, contains a Stack-based Buffer Overflow vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Remote execution. |
| The VeloCloud Edge and Gateway exhibit an out-of-bounds write vulnerability when processing tunneled IP fragments between authenticated overlay neighbors. This vulnerability impacts the VeloCloud VCMP tunnel protocol only.
A successful exploit can cause the affected process to terminate and restart, leading to a temporary disruption of traffic. Hosts on the internet that are unauthenticated and unable to form an overlay peer relationship can not trigger the vulnerable logic. |
| An unauthenticated actor with network access to the private HA interconnect may trigger sensitive HA peer functions without verification. This could result in elevated command execution on Edge units where HA is enabled. |
| oras-go is a Go library for managing OCI artifacts. Prior to 2.6.2, the parseLink function in registry/remote/utils.go accepts an absolute URL from a registry-controlled Link response header without validating its scheme, host, or port. Tags, Referrers, and Repositories pagination operations then issue a GET request to the attacker-selected URL from the victim's network, allowing blind server-side request forgery against internal services. The response body is not returned to the attacker, but timing and error differences can reveal service reachability, and credentials may be attached when the credential store has an entry for the target host. Exploitation requires a victim to perform a pagination-based listing operation against a malicious registry. The maintainer identifies this report as a duplicate of GHSA-3hr5-mjrr-hfjh and states that remediation is consolidated in that earlier advisory. The consolidated issue is fixed in version 2.6.2. |
| oras-go is a Go library for managing OCI artifacts. Prior to 2.6.2, content/file.Store extraction of OCI layers marked with io.deis.oras.content.unpack=true can write outside the store working directory. The pushDir path through extractTarDirectory and ensureLinkPath validates symlink targets lexically, resolveRelToBase skips its parent-symlink walk for root-level entries, and writeFile follows a terminal symlink when opening a regular file. A malicious archive can therefore create a symlink chain whose lexical target remains inside the extraction root but whose resolved target is an attacker-selected absolute path, then overwrite that target with a same-named regular-file entry even when AllowPathTraversalOnWrite is false. Pulling an attacker-controlled artifact can create or overwrite any file writable by the process and may lead to code execution. This issue is fixed in version 2.6.2. |
| MikroORM is a TypeScript ORM for Node.js based on Data Mapper, Unit of Work and Identity Map patterns. Prior to 6.6.16 and 7.1.7, the shared SQL layer validates the field key of an orderBy clause but does not validate its direction value before AbstractSqlPlatform.getOrderByExpression concatenates it into an ORDER BY clause. Applications that bind attacker-controlled request data to the direction in em.find(), em.findOne(), em.findAndCount(), QueryBuilder.orderBy(), or QueryBuilderHelper.getQueryOrderFromObject() can permit a raw SQL fragment that performs blind or boolean extraction of data available to the database account. The BaseMySqlPlatform and MsSqlPlatform fallthrough paths have the same behavior, affecting SQLite, PostgreSQL, MySQL, MariaDB, MSSQL, libSQL, and Oracle drivers, while MongoDB is not affected. This issue is fixed in versions 6.6.16 and 7.1.7. |
| The Eventin WordPress plugin before 4.1.24 does not verify that a completed payment corresponds to the order it is applied to, confirming only that the payment gateway reports the transaction as successful, not its amount, currency, or which order it belongs to, allowing unauthenticated visitors to mark unpaid orders of any value as paid by replaying the transaction of a single genuine low-value payment. |
| An integer overflow was addressed with improved input validation. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted 3D model may lead to memory corruption. |
| Adobe Experience Manager is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field. Scope is changed. |
| Vulnerability in the Oracle Forms product of Oracle Fusion Middleware (component: Forms Services, C/S, Charmode). Supported versions that are affected are 12.2.1.19.0 and 14.1.2.0.0. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Forms. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Forms accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Forms. CVSS 3.1 Base Score 6.5 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:H). |
| Vulnerability in the Siebel CRM Cloud Applications product of Oracle Siebel CRM (component: Siebel Cloud Manager). Supported versions that are affected are 22.3-26.7. Easily exploitable vulnerability allows unauthenticated attacker with network access via SSH to compromise Siebel CRM Cloud Applications. While the vulnerability is in Siebel CRM Cloud Applications, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Cloud Applications accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| Concrete CMS before 9.5.3 contained a stored cross-site scripting vulnerability in SVG file handling. When SVG processing was set to the non-default "Reject files containing potentially harmful elements" mode (concrete.file_manager.images.svg_sanitization.action = reject), uploaded SVGs were checked only against a small built-in blocklist covering the script element and on* event-handler attributes; the broader enshrined/svg-sanitize pass still ran, but its result was discarded, so vectors it would have stripped, such as a javascript: URI in an xlink:href, were stored unmodified and executed when the file was opened directly. A user able to upload files could thereby run arbitrary JavaScript in the browser of any user who viewed the file. The default sanitize mode was not affected. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 1.8 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:A/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Oriol Ortiz for reporting. |
| Concrete CMS 9.4.0 through 9.5.2 did not escape colliding page paths before rendering them in the location panel's duplicate-path confirmation dialog. The panel's check endpoint returned the submitted path unmodified in its JSON response, and client-side JavaScript inserted each value into the dialog as raw HTML, so a crafted page path executed script in the editor's authenticated browser session. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 2.0 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:P/VC:L/VI:L/VA:L/SC:N/SI:N/SA:N. Thanks Yonatan Drori from Tenzai for reporting. |
| Concrete CMS before 9.5.3 improperly neutralized a user-supplied custom date format when rendering conversation messages, resulting in reflected cross-site scripting. An attacker could execute arbitrary JavaScript in the browser of a user who was tricked into submitting a crafted POST request to the conversation view endpoint. Exploitation was aided by the absence of a CSRF token on the endpoint, which allowed the payload to be delivered through an auto-submitting cross-origin POST without authentication. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 2.1 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:P/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Yonatan Drori from Tenzai for reporting. |
| The guest-to-host Unix-domain socket relay in Docker Sandboxes validates that a socket path is inside an authorized workspace, but later reconnects using the pathname. A malicious guest can replace an intermediate directory with a symlink between validation and connection, causing the host to connect to an arbitrary AF_UNIX socket outside the shared workspace. This can expose data or host-side capabilities provided by the targeted socket. |
| A privileged attacker can exploit certain operation to execute arbitrary commands with root privileges, leading to full device compromise. An authenticated user can exploit gRPC Network Security Interface (gNSI) Certz service on Arista EOS-based products to escalate privileges and execute arbitrary OS commands via a crafted Certz Rotate request. The Bootz service is also affected. |
