Export limit exceeded: 361387 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361387 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-13351 | 1 Zephyrproject-rtos | 1 Zephyr | 2026-06-25 | 7.5 High |
| Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service. | ||||
| CVE-2026-50573 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 6.8 Medium |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, `pnpm install` in non-frozen mode can accept new remote package content after detecting that the downloaded tarball does not match the integrity recorded in pnpm-lock.yaml. When a package is already locked with an integrity value, and the registry later serves different metadata and tarball content for the same package name and version, pnpm initially reports an integrity mismatch. However, plain pnpm install then performs a resolution repair, accepts the registry's new integrity, updates the lockfile, installs the new content, and exits successfully. This means the lockfile integrity check does not act as a hard stop by default. This vulnerability is fixed in 10.34.0 and 11.4.0. | ||||
| CVE-2026-50014 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 6.4 Medium |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm passes the lockfile-controlled git resolution.commit value to git fetch without a -- separator or commit-format validation. For git dependencies fetched through the shallow-fetch path, a malicious lockfile can replace the expected 40-character commit hash with a Git option such as --upload-pack=<command>. For SSH and local transports, --upload-pack can execute the supplied command. HTTPS transports ignore --upload-pack, so the practical attack surface is primarily SSH or local git dependencies. This vulnerability is fixed in 10.34.0 and 11.4.0. | ||||
| CVE-2026-50015 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 7.3 High |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's patch application pipeline (@pnpm/patch-package) performs no path validation on file paths extracted from .patch files. An attacker who contributes a malicious patch file via a pull request can write attacker-controlled content to or delete arbitrary files on the filesystem during pnpm install, as the user running the install. The diff --git header paths containing ../../ sequences traverse out of the package directory, and the traversal is difficult to catch in code review because patch file diff headers are opaque to most reviewers. This vulnerability is fixed in 10.34.0 and 11.4.0. | ||||
| CVE-2026-50016 | 1 Pnpm | 1 Pnpm | 2026-06-25 | 8.8 High |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm allows a transitive dependency alias from registry package metadata to contain path traversal segments. During install, pnpm later uses that alias as a filesystem path when linking dependency nodes. As a result, a registry package can cause `pnpm install --ignore-scripts` to replace paths in the current project with symlinks to attacker-controlled dependency package directories. This vulnerability is fixed in 10.34.0 and 11.4.0. | ||||
| CVE-2026-11999 | 1 Wolfssl | 1 Wolfssl | 2026-06-25 | N/A |
| X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are. | ||||
| CVE-2026-12897 | 1 Hornerautomation | 1 Cscape | 2026-06-25 | N/A |
| Horner Automation Cscape versions prior to 10.2 SP3 are vulnerable to an Out-of-Bounds Read vulnerability through parsing CSP files. Successful exploitation of this vulnerability could allow an attacker to disclose information and execute arbitrary code. | ||||
| CVE-2026-12921 | 1 Azeotech | 1 Daqfactory | 2026-06-25 | N/A |
| In AzeoTech DAQFactory versions 21.1 and prior, a Use After Free vulnerability can be exploited by an attacker using specially crafted .ctl files which can result in code execution. | ||||
| CVE-2026-46606 | 1 Nicolargo | 1 Glances | 2026-06-25 | 7.8 High |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, the Glances KVM/QEMU monitoring engine (glances/plugins/vms/engines/virsh.py) passes VM domain names, read directly from virsh list --all output, into f-string command templates that are processed by secure_popen(). secure_popen() is explicitly designed to interpret &&, |, and > as shell operators. Because domain names are never sanitised before interpolation, any user with the ability to create or rename a KVM/QEMU virtual machine can execute arbitrary commands as the OS user running Glances — commonly root on hypervisor hosts. This vulnerability is fixed in 4.5.5. | ||||
| CVE-2026-53925 | 1 Nicolargo | 1 Glances | 2026-06-25 | 7.8 High |
| Glances is an open-source system cross-platform monitoring tool. From 4.0.8 until 4.5.5, the secure_popen() function in glances/secure.py interprets > (file redirection), | (pipe), and && (command chaining) operators in command strings. These operators are applied without any validation on the target file path, piped command, or chained command. When Application Monitoring Process (AMP) modules load their command or service_cmd configuration values from glances.conf, those values are passed directly to secure_popen() with no sanitization. This allows an attacker who can modify the Glances configuration file to write arbitrary content to arbitrary filesystem paths (via >), chain arbitrary commands (via &&), or pipe command output to arbitrary programs (via |). This vulnerability is fixed in 4.5.5. | ||||
| CVE-2026-46607 | 1 Nicolargo | 1 Glances | 2026-06-25 | 7.8 High |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, glances/outdated.py uses pickle.load() to read a version-check cache file stored at a predictable, world-accessible path (~/.cache/glances/glances-version.db or $XDG_CACHE_HOME/glances/glances-version.db). No integrity check, signature verification, or format validation is performed before deserialization. An attacker with write access to that path — through any of several realistic local or container-level scenarios — can plant a malicious pickle file and achieve arbitrary code execution as the OS user running Glances the next time it starts with version checking enabled (the default). This vulnerability is fixed in 4.5.5. | ||||
| CVE-2026-2377 | 1 Redhat | 3 Mirror Registry, Mirror Registry For Red Hat Openshift, Quay | 2026-06-25 | 6.5 Medium |
| A flaw was found in Red Hat Quay and mirror registry for Red Hat OpenShift. The log export feature in these products allows an authenticated user to specify an arbitrary callback URL. A backend process then makes server-side HTTP requests to this provided URL. This vulnerability, known as Server-Side Request Forgery (SSRF), could allow an attacker to send requests from the application's internal network, potentially leading to the disclosure of sensitive information. | ||||
| CVE-2026-53254 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in MCC handlers The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. | ||||
| CVE-2026-53267 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c | ||||
| CVE-2026-53237 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. | ||||
| CVE-2026-52811 | 1 Gogs | 1 Gogs | 2026-06-25 | N/A |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, (*Repository).UploadRepoFiles checks for symlinks only on the leaf of the upload target (osx.IsSymlink(targetPath)). The siblings UpdateRepoFile, DeleteRepoFile, and GetDiffPreview use hasSymlinkInPath, which lstats every component — UploadRepoFiles is the lone outlier. An attacker with repo-write access plus a multipart upload whose filename contains a literal backslash (preserved by filepath.Base on Linux, then converted to / by pathx.Clean) redirects the write through a previously-committed directory symlink. iox.CopyFile opens the destination with os.Create (no O_NOFOLLOW), so the kernel follows the parent symlink and writes attacker bytes anywhere the gogs UID can write — ~git/.ssh/authorized_keys → SSH foothold, or <repo>.git/hooks/post-receive → next-push RCE. This vulnerability is fixed in 0.14.3. | ||||
| CVE-2026-52816 | 1 Gogs | 1 Gogs | 2026-06-25 | N/A |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, the Jupyter Notebook (ipynb) sanitizer endpoint at POST /-/api/sanitize_ipynb allows arbitrary data: URIs without proper restrictions, potentially leading to Cross-Site Scripting (XSS). The endpoint uses bluemonday.UGCPolicy() with p.AllowURLSchemes("data") which permits all data URI schemes including data:text/html, enabling attackers to inject malicious HTML/JavaScript. Additionally, the endpoint has no authentication middleware, allowing any registered user to exploit this vulnerability. This vulnerability is fixed in 0.14.3. | ||||
| CVE-2026-52804 | 1 Gogs | 1 Gogs | 2026-06-25 | N/A |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, a repository admin collaborator can escalate their privileges to owner-level access by exploiting an off-by-one error in the ChangeCollaborationAccessMode function. This vulnerability is fixed in 0.14.3. | ||||
| CVE-2026-52796 | 1 Gogs | 1 Gogs | 2026-06-25 | 3.5 Low |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, specially crafted issue index pattern can cause a panic when rendering, resulting in denial of service. In internal/markup/markup.go, RenderIssueIndexPattern renders the issue index pattern to a link using com.Expand, which is not safe: when the configured pattern contains an opening brace { but no closing brace }, strings.Index(template, "}") returns -1 and the subsequent slice template[:-1] triggers a panic. Once such a pattern is set, any page in the affected repository that contains an issue index reference such as #1 becomes unavailable. This vulnerability is fixed in 0.14.3. | ||||
| CVE-2025-64719 | 1 Gogs | 1 Gogs | 2026-06-25 | 4.9 Medium |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, a malicious user with rights to create a new file on a repository or wiki page can trigger a denial of service condition in which the pages containing the listing of files will return HTTP error 500 and render the web interface unusable for the repository or wiki. The issue is present in file internal/route/repo/wiki.go and internal/route/repo/view.go where the pages try to recover commit information. If errors are returned while recovering commit information, the page will return a 500 error and stop rendering, resulting in a denial of service. This vulnerability is fixed in 0.14.3. | ||||