| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with permission to create or modify workflows could achieve global prototype pollution via the XML Node leading to RCE when combined with other nodes exploiting the prototype pollution. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430 |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, a flaw in the xml2js library used to parse XML request bodies in n8n's webhook handler allowed prototype pollution via a crafted XML payload. An authenticated user with permission to create or modify workflows could exploit this to pollute the JavaScript object prototype and, by chaining the pollution with the Git node's SSH operations, achieve remote code execution on the n8n host. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| The bson_validate function may return early on specific inputs and incorrectly report success. This behavior could result in skipping validation for BSON data, allowing malformed or invalid UTF-8 sequences to bypass validation and be processed incorrectly. The issue may affect applications that rely on these functions to validate untrusted BSON data before further processing. This issue affects MongoDB C Driver versions prior to 1.30.5, MongoDB C Driver version 2.0.0 and MongoDB C Driver version 2.0.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid. |
| The fix for CVE-2025-68161 https://logging.apache.org/security.html#CVE-2025-68161 was incomplete: it addressed hostname verification only when enabled via the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property, but not when configured through the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName attribute of the <Ssl> element.
Although the verifyHostName configuration attribute was introduced in Log4j Core 2.12.0, it was silently ignored in all versions through 2.25.3, leaving TLS connections vulnerable to interception regardless of the configured value.
A network-based attacker may be able to perform a man-in-the-middle attack when all of the following conditions are met:
* An SMTP, Socket, or Syslog appender is in use.
* TLS is configured via a nested <Ssl> element.
* The attacker can present a certificate issued by a CA trusted by the appender's configured trust store, or by the default Java trust store if none is configured.
This issue does not affect users of the HTTP appender, which uses a separate verifyHostname https://logging.apache.org/log4j/2.x/manual/appenders/network.html#HttpAppender-attr-verifyHostName attribute that was not subject to this bug and verifies host names by default.
Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue. |
| A flaw was found in ansible-collection-community-general. This vulnerability allows for information exposure (IE) of sensitive credentials, specifically plaintext passwords, via verbose output when running Ansible with debug modes. Attackers with access to logs could retrieve these secrets and potentially compromise Keycloak accounts or administrative access. |
| A flaw was found in the Keycloak identity and access management system when Fine-Grained Admin Permissions(FGAPv2) are enabled. An administrative user with the manage-users role can escalate their privileges to realm-admin due to improper privilege enforcement. This vulnerability allows unauthorized elevation of access rights, compromising the intended separation of administrative duties and posing a security risk to the realm. |
| A flaw was found in Keycloak. When an authenticated attacker attempts to merge accounts with another existing account during an identity provider (IdP) login, the attacker will subsequently be prompted to "review profile" information. This vulnerability allows the attacker to modify their email address to match that of a victim's account, triggering a verification email sent to the victim's email address. The attacker's email address is not present in the verification email content, making it a potential phishing opportunity. If the victim clicks the verification link, the attacker can gain access to the victim's account. |
| A flaw was found in Keycloak. When the configuration uses JWT tokens for authentication, the tokens are cached until expiration. If a client uses JWT tokens with an excessively long expiration time, for example, 24 or 48 hours, the cache can grow indefinitely, leading to an OutOfMemoryError. This issue could result in a denial of service condition, preventing legitimate users from accessing the system. |
| A flaw was found in the Keycloak organization feature, which allows the incorrect assignment of an organization to a user if their username or email matches the organization’s domain pattern. This issue occurs at the mapper level, leading to misrepresentation in tokens. If an application relies on these claims for authorization, it may incorrectly assume a user belongs to an organization they are not a member of, potentially granting unauthorized access or privileges. |
| A vulnerability was found in the Keycloak-services package. If untrusted data is passed to the SearchQueryUtils method, it could lead to a denial of service (DoS) scenario by exhausting system resources due to a Regex complexity. |
| A flaw was found in the quarkus-resteasy extension, which causes memory leaks when client requests with low timeouts are made. If a client request times out, a buffer is not released correctly, leading to increased memory usage and eventual application crash due to OutOfMemoryError. |
