| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: adm1275: Prevent reading uninitialized stack
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array. |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
kvm_s390_get_cmma_bits() allocates its output buffer with vmalloc(),
which does not zero the returned pages:
values = vmalloc(args->count);
In the non-peek (migration) path, dat_get_cmma() reports a byte count
spanning from the first to the last dirty page, but __dat_get_cmma_pte()
writes values[gfn - start] only for pages whose CMMA dirty bit is set.
The walk uses DAT_WALK_IGN_HOLES, so clean and unmapped pages that lie
between two dirty pages within the reported span are visited but never
store their byte. Those gaps (up to KVM_S390_MAX_BIT_DISTANCE pages
each) stay uninitialized yet fall inside [0, count) and are copied out
by copy_to_user(), disclosing stale kernel memory to user space.
Before the switch to the new gmap implementation the buffer was fully
populated for every gfn in the span, so no uninitialized bytes were
exposed; the dirty-only walk introduced the leak.
Use vzalloc() so the gaps read back as zero. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the host1x_device_parse_dt() failure
path. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix mrec_lock ABBA deadlock in rename
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode(). |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A vulnerability was found in Webkul Bagisto up to 2.4.4. Affected by this issue is some unknown functionality of the file /admin/configuration/cache-management/execute of the component Configuration Management. The manipulation of the argument action results in authorization bypass. The attack may be launched remotely. The exploit has been made public and could be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| A vulnerability has been found in Webkul Bagisto up to 2.4.4. Affected by this vulnerability is an unknown functionality of the file /customer/account/rma/update-status of the component RMA State Validation. The manipulation leads to enforcement of behavioral workflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the
target-supplied data segment. The segment carries a 2-byte sense length
followed by the sense bytes, so it must hold 2 + senselen bytes, but the
bounds check only requires datalen >= senselen:
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
A target that returns a SCSI Response whose datalen equals senselen
(with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data +
2 read up to two bytes past the received data. Those bytes are stale
conn->data contents and end up in the command's sense buffer, which is
returned to userspace.
Account for the 2-byte sense length prefix in the check. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
iscsi_tcp_hdr_dissect() receives the data segment of several PDU types
into the fixed-size conn->data buffer, which is allocated for
ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP,
REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU
whose DataSegmentLength exceeds that buffer.
The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its
data segment (sense/response data) into conn->data via
iscsi_tcp_data_recv_prep(), but it does so without the same check. The
only upstream bound on in.datalen is conn->max_recv_dlength, the
initiator's advertised MaxRecvDataSegmentLength, which is commonly
negotiated well above 8192 (open-iscsi defaults to 262144). A target
that returns a SCSI Response with a DataSegmentLength between 8193 and
max_recv_dlength therefore overflows the 8192-byte conn->data buffer.
Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly
like those responses: bound the data segment, receive it into conn->data
when present, and otherwise complete the PDU with no data. Fold the
opcode into that case group rather than duplicating the check. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nzxt-smart2) DMA-align output buffer
Sashiko reports:
When send_output_report() calls hid_hw_output_report(), the underlying USB
HID core calls usb_interrupt_msg() which maps this buffer directly for DMA.
When the DMA mapping flushes or invalidates the cacheline, it will corrupt
the adjacent variables (mutex, update_interval) that were modified
concurrently by the CPU. This causes memory corruption due to cacheline
sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA
API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings
for this violation.
Any operation that triggers send_output_report() (like setting a fan speed
or updating the interval) causes the USB DMA mapping. On systems with
non-coherent caches, this structural bug causes immediate and deterministic
memory corruption.
Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Prevent access to unsupported weight registers
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num
to 5. However, it assigns several NCT6106 register arrays (such as
NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and
NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP.
These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If
data->has_pwm has bits 3 or 4 set (which is structurally possible for
nct6116), the loop attempts to read elements at index 3 and 4 from these
3-element arrays. This results in a global out-of-bounds read, which can
be caught by KASAN.
Furthermore, the driver uses these garbage out-of-bounds values as
hardware register addresses for subsequent read and write operations. This
leads to invalid hardware register access, potentially causing hardware
misconfiguration or system crashes.
The underlying problem is that the chip does support up to five fan
control channels, but only the first three support weight control.
Fix the problem by extending the affected weight register arrays with
zeroed fields. The driver uses zeroed register addresses to determine
if a register is supported or not, and skips accesses for unsupported
registers. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exponent 32 is too large for 32-bit type int
Fix this by rejecting offshift >= 16 during filter creation in
u32_change(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix IOPF group ownership UAF
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix pending command UAF in EIR updates
MGMT_OP_SET_LOCAL_NAME is handled asynchronously on powered controllers
and can run set_name_sync(). When the controller is BR/EDR capable,
set_name_sync() updates the local name and then rebuilds EIR data through
eir_create(). The EIR builder walks hdev->uuids, but the UUID list can
be changed and entries can be freed by MGMT_OP_ADD_UUID and
MGMT_OP_REMOVE_UUID.
pending_eir_or_class() is meant to serialize management commands that
can change EIR or the class of device, but it did not include
MGMT_OP_SET_LOCAL_NAME. In addition, it walked hdev->mgmt_pending
without hdev->mgmt_pending_lock even though pending commands are added
and removed under that mutex. A racing command completion can therefore
remove and free a pending command while pending_eir_or_class() is still
inspecting it, leading to a use-after-free in the pending-command list or
allowing a local name update to rebuild EIR while UUID entries are being
removed.
Take hdev->mgmt_pending_lock while scanning hdev->mgmt_pending and treat
MGMT_OP_SET_LOCAL_NAME as an EIR/class-affecting pending command on the
powered asynchronous path. Check for a conflicting pending command before
copying the new short name so a rejected SET_LOCAL_NAME request does not
modify hdev->short_name. |
