| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jenkins FitNesse Plugin 1.36 and earlier stores passwords unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Extended Read permission or access to the Jenkins controller file system. |
| A missing permission check in Jenkins Assembla Plugin 1.4 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL using an attacker-specified username and password. |
| A cross-site request forgery (CSRF) vulnerability in Jenkins Assembla Plugin 1.4 and earlier allows attackers to connect to an attacker-specified URL using an attacker-specified username and password. |
| A cross-site request forgery (CSRF) vulnerability in Jenkins Zowe zDevOps Plugin 1.1.3.50.ve350c9b_450b_1 and earlier allows attackers to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins. |
| A missing permission check in Jenkins Zowe zDevOps Plugin 1.1.3.50.ve350c9b_450b_1 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins. |
| Improper Neutralization used in an OS Command in the container launcher in Google Gemini CLI (versions prior to 0.39.1) and run-gemini-cli GitHub Action (versions prior to 0.1.22) on headless CI platforms allows an unprivileged attacker to achieve pre-sandbox host-level code execution a maliciously crafted .gemini/.env file. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in OpenText Access Manager allows Cross-Site Scripting (XSS).
This issue affects Access Manager: from 5.1 through 5.1.2. |
| An unauthorized user can modify configuration through API
calls that affects the OpenText Access
Manager. This issue affects Access Manager before 5.1.3. |
| Marlin Firmware through 2.1.2.7, fixed in commit 1f255d1, when built with MESH_BED_LEVELING enabled, contains an out-of-bounds write vulnerability in the M421 G-code handler that allows attackers to corrupt firmware memory by supplying out-of-range X and Y grid indices. Attackers can send a single crafted G-code command via USB serial, network interface, or malicious gcode file to write an attacker-controlled 32-bit float value past the z_values array bounds, corrupting adjacent firmware variables and causing denial of service or firmware state corruption. |
| Feast before 0.63.0 contains an unsafe deserialization vulnerability that allows unauthenticated or unauthorized attackers to achieve remote code execution by sending a crafted gRPC request to the registry server. The user_defined_function.body field of an OnDemandFeatureView spec is decoded from base64 and passed to dill.loads() before any authorization check is performed, enabling attackers to embed a malicious serialized Python object with an arbitrary __reduce__ method to execute OS commands as the feast service account. |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReentrantReadWriteLock can incorrectly grant a write lock after one thread acquires the read lock 32,768 times. The lock stores a thread's local read and write hold counts in one integer. The low 15 bits are used for the read hold count, and bit 15 is used as WRITE_LOCK_HELD. After 32,768 reentrant read acquisitions, the local read count crosses into the write-lock bit. try_write_lock then treats the thread as already holding a write lock and returns true without setting the global RUNNING_WRITER bit. This breaks the core mutual-exclusion guarantee: the caller is told it has a write lock, but other threads can still hold or acquire read locks at the same time. This vulnerability is fixed in 1.3.7. |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReadWriteLock#release_write_lock does not verify that the calling thread acquired the write lock. Any thread with access to the lock object can release an active write lock held by another thread. A second writer can then enter its critical section while the first writer is still running. Concurrent::ReadWriteLock#release_read_lock also decrements the shared counter even when no read lock is held. Calling it on a fresh lock changes the counter from 0 to -1, after which normal read acquisition raises Concurrent::ResourceLimitError. This is a synchronization correctness issue in the public Concurrent::ReadWriteLock API. This vulnerability is fixed in 1.3.7. |
| In WC-Radio, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: handle empty bo and UAF races
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
(cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: put folios not suitable for writeback
The batch holds references to the folios (see `filemap_get_folios`,
`folio_batch_release`), so we need to `folio_put` the folios we remove.
Tested on v6.18. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix missing expect put in obj eval
nft_ct_expect_obj_eval() allocates an expectation and may call
nf_ct_expect_related(), but never drops its local reference.
Add nf_ct_expect_put(exp) before return to balance allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns. |
| A vulnerability in the browser-based version of Cisco Webex App could have allowed an unauthenticated, remote attacker to redirect users to a malicious webpage. Cisco has addressed this vulnerability in the Cisco Webex App, and no customer action is needed.
This vulnerability existed due to improper input validation of URL parameters in an HTTP request. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to click a crafted URL. A successful exploit could have allowed the attacker to redirect a user to a malicious website. |
