| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec. |
| A flaw was found in environment-modules. A local attacker can exploit this vulnerability by placing a maliciously named modulefile in a location visible to the victim's `MODULEPATH`. When the victim uses Bash completion for `module` or `ml` commands, the malicious module name, containing shell metacharacters, is evaluated as a command. This can lead to arbitrary command execution in the completing user's shell, impacting their confidentiality, integrity, and availability. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
| A vulnerability exists in a component of the HPE Networking EdgeConnect SD-WAN Gateways that may allow for arbitrary command execution. An authenticated remote attacker could exploit this vulnerability by providing a specially crafted input to the affected component. Successful exploitation could result in remote code execution as root. |
| A vulnerability in the API endpoint of HPE Networking EdgeConnect SD-WAN Orchestrator could allow a low-privilege authenticated remote attacker to escalate privileges. Successful exploitation of this vulnerability may enable the attacker to execute arbitrary system commands with root privileges on the underlying operating system. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A crafted cineon image can declare unsupported component bit depth 26. cineoninput::open() maps it to a 32-bit imagespec, but libcineon maps the unsupported depth to an 8-byte value, so cineoninput::read_native_scanline() causes attacker-controlled data to be written beyond the 4-byte-per-pixel caller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/cineon.imageio/cineoninput.cpp, CineonInput::open(), CineonInput::read_native_scanline(), ComponentDataSize(), bit depth 26, and ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.23.2, when WITH_UNCOMPRESSED_CODEC is enabled, heif_context_add_image_tile() accepts an independently constructed tile whose component-plane dimensions do not match the tile geometry established by the prototype image. ImageItem_uncompressed::add_image_tile() passes that tile directly to unc_encoder::encode_tile(), which lacked the check_component_sizes() gate and sizes its output from the configured tile geometry while copying the tile's actual component-plane dimensions. An oversized component plane can therefore make unc_encoder_component_interleave::encode_tile() copy attacker-controlled data beyond the heap output buffer. This issue is fixed in version 1.23.2. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to cause a denial of service due to improper validation of FTP authentication commands. |
| IBM Cloud Pak for Data 5.1.2 could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input. |
| Imager::File::PNG versions from 1.003 before 1.004 for Perl write past the end of the row buffer reading a PNG with a tRNS transparency chunk in read_direct8.
With a tRNS chunk, read_direct8() adds an alpha channel to the image it creates but still sizes the row buffer from the original channel count. libpng expands the transparency into that extra channel, so png_read_row() fills one channel more than the buffer holds, at one byte per sample, and writes width bytes past the end of the allocation. Palette images go to read_paletted() and 16-bit images to read_direct16(), which sizes its buffer from png_get_rowbytes() and allocates enough for the expanded row.
The same reader ships bundled in the Imager distribution.
Reading an attacker-supplied PNG through Imager->read() corrupts the heap, which can crash the process. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_v3_module module. When using HTTP/3 with OpenSSL versions <= OpenSSL 3.5.0 under certain configurations, a limited heap buffer overflow could happen while processing a TLS handshake. This can happen in a non-deterministic manner that is beyond the attacker's control. This may cause a heap buffer overflow in the NGINX worker process leading to a restart and/or limited data corruption.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or limited data corruption. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
[ johan: amend commit message; also check for short descriptors ] |
| Out of bounds write in ServiceWorker in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| An out-of-bounds write vulnerability exists in some of the Ethernet switches because of improper validation of the username field length during Web login processing. This may allow a remote attacker to submit a specially crafted overly long input, triggering a buffer overflow that can cause the authentication process to crash and result in a Denial of Service (DoS) attack. |
| QND contains an improper access control vulnerability in a named pipe, which may allow a local attacker who is logged in to a Windows PC where the affected product's client is installed to execute arbitrary commands with SYSTEM privileges. |
| A flaw was found in QEMU. The VAPIC setup hypercall in hw/i386/vapic.c does not validate that the writable RAM alias remains within the option ROM window. A privileged guest user on a Q35/KVM machine can position this alias over locked SMRAM, bypassing chipset D_LCK protection and injecting code into System Management Mode memory. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC EXT SPS RPS counts
The HEVC SPS control carries the short-term and long-term RPS counts
that decoder drivers use to walk the matching EXT SPS dynamic arrays.
Reject SPS values that exceed the HEVC limits of 64 short-term sets and
32 long-term references so drivers cannot later index beyond those
controls.
Also reject EXT SPS ST RPS entries whose negative or positive picture
counts exceed the 16-entry arrays, or whose combined delta-POC count
exceeds the HEVC DPB maximum. |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Move arena register slot below TCC context
Currently, the stack layout places the optional arena register slot
above the tail call counter context. When arena_vm_start is dynamically
enabled, it shifts the relative offset of the tcc_ptr slot within the
stack frame, causing hardcoded tracking macros to mismatch and leading
to memory misalignment or corruption potentially.
To fix this, move the arena register save and restore sequences below
the tail call counter context slots in both build_prologue() and the
epilogue.
Update __build_epilogue() to insert a proper offset decrement to safely
skip the unneeded tcc_ptr reading block while accurately aligning with
the relocated arena slot at the very bottom.
With this patch, the tcc_ptr slot is always positioned at a fixed
distance directly underneath the base callee-saved registers that is
independent of whether the arena features are on. |
