| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In RtpPacket::decodePacket, there is a possible out-of-bounds read due to an integer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is needed for exploitation. |
| Improper input validation in .NET allows an unauthorized attacker to elevate privileges locally. |
| In IntfGraphCreate of intfgraph.c, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In RtpPacket::decodePacket, there is a possible out of bounds access due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. |
| In ExecuteGraph command handler of EdgeTPU firmware, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with root privileges needed. User interaction is not needed for exploitation. |
| In numberOfReportBlocks of RtpSession.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| An integer overflow in the mtar_next() function in src/microtar.c in rxi microtar 0.1.0 allows a remote attacker to cause a denial of service (uncontrolled CPU consumption / infinite loop) via a crafted tar archive. mtar_next() computes the offset to the next record as round_up(h.size, 512) + sizeof(mtar_raw_header_t) using 32-bit arithmetic. When the header size field is a multiple of 512 in the range 0xFFFFFC01-0xFFFFFE00 (e.g. 0xFFFFFE00), the addition wraps to 0, so mtar_next() seeks to the current record position instead of advancing. As a result, mtar_find() and any loop that iterates entries with mtar_next() repeat indefinitely over the same record, hanging the process at 100% CPU with no recovery. |
| LibreOffice can import EMF+ graphics, which may be embedded in documents. A heap buffer overflow existed when importing an EMF+ gradient brush. The number of gradient blend points was read from the file and used to compute an allocation size, but that multiplication could overflow, so a small buffer was allocated and then filled as if it were large, writing past its end. In fixed versions the blend-point count is checked against the data actually available before allocating. |
| LibreOffice can import drawings in the DXF format used by CAD software. A heap buffer overflow existed when importing a DXF polyline. The point count taken from the file was truncated to a 16-bit value when the point buffer was sized, while the full count was used to fill it, so a polyline whose point count exceeded the 16-bit range was written past the end of the buffer. In fixed versions such oversized polylines are rejected. |
| In multiple functions of VideoRtpPayloadDecoderNode.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
This data originates from userspace and is used in buffer offset
calculations which could potentially overflow causing an out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
dm mirror: fix integer overflow in create_dirty_log()
The argument count calculation in create_dirty_log() performs
`*args_used = 2 + param_count` before validating against argc. When a
user provides a param_count close to UINT_MAX via the device mapper
table string, this unsigned addition wraps around to a small value,
causing the subsequent `argc < *args_used` check to be bypassed.
The overflowed param_count is then passed as argc to dm_dirty_log_create(),
where it can cause out-of-bounds reads on the argv array.
Fix by comparing param_count against argc - 2 before performing the
addition, following the same pattern used by parse_features() in the
same file. Since argc >= 2 is already guaranteed, the subtraction is
safe. |
| In the Linux kernel, the following vulnerability has been resolved:
rxgk: Fix potential integer overflow in length check
Fix potential integer overflow in rxgk_extract_token() when checking the
length of the ticket. Rather than rounding up the value to be tested
(which might overflow), round down the size of the available data. |
| In the Linux kernel, the following vulnerability has been resolved:
slub: fix data loss and overflow in krealloc()
Commit 2cd8231796b5 ("mm/slub: allow to set node and align in
k[v]realloc") introduced the ability to force a reallocation if the
original object does not satisfy new alignment or NUMA node, even when
the object is being shrunk.
This introduced two bugs in the reallocation fallback path:
1. Data loss during NUMA migration: The jump to 'alloc_new' happens
before 'ks' and 'orig_size' are initialized. As a result, the
memcpy() in the 'alloc_new' block would copy 0 bytes into the new
allocation.
2. Buffer overflow during shrinking: When shrinking an object while
forcing a new alignment, 'new_size' is smaller than the old size.
However, the memcpy() used the old size ('orig_size ?: ks'), leading
to an out-of-bounds write.
The same overflow bug exists in the kvrealloc() fallback path, where the
old bucket size ksize(p) is copied into the new buffer without being
bounded by the new size.
A simple reproducer:
// e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW
while (1) {
void *p = kmalloc(128, GFP_KERNEL);
p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE);
kfree(p);
}
demonstrates the issue:
==================================================================
BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130
Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47):
memcpy_orig+0x68/0x130
krealloc_node_align_noprof+0x1c8/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64
allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago):
krealloc_node_align_noprof+0x19c/0x340
lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm]
lkdtm_do_action+0x3a/0x60 [lkdtm]
...
==================================================================
Fix it by moving the old size calculation to the top of __do_krealloc()
and bounding all copy lengths by the new allocation size. |
| Issue summary: A signed integer overflow when sizing the destination
buffer for Unicode output in ASN1_mbstring_ncopy() can lead to a heap
buffer overflow.
Impact summary: A heap buffer overflow may lead to a crash or possibly
attacker controlled code execution or other undefined behaviour.
In ASN1_mbstring_copy() and ASN1_mbstring_ncopy() the destination
size for Unicode output is computed in a signed int: by left shift
of the input character count for BMPSTRING (UTF-16) and
UNIVERSALSTRING (UTF-32), and by summing per-character byte counts
for UTF8STRING. The calculation overflows when the input reaches
around 2^30 characters. In the worst case (UNIVERSALSTRING at 2^30
characters) the size wraps to zero, OPENSSL_malloc(1) is called, and
the subsequent character copy writes several gigabytes past the
one-byte allocation.
X.509 certificate processing routes through ASN1_STRING_set_by_NID(),
whose DIRSTRING_TYPE mask excludes UNIVERSALSTRING and whose per-NID
size limits cap the input length; no network protocol or
certificate-handling path in OpenSSL exercises the overflow.
Triggering the bug requires an application that calls
ASN1_mbstring_copy() or ASN1_mbstring_ncopy() directly, or registers
a custom string type via ASN1_STRING_TABLE_add(), with
attacker-controlled input on the order of half a gigabyte or more.
For these reasons this issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as the affected code is outside the OpenSSL FIPS module
boundary. |
| Use after free in Windows SDK allows an authorized attacker to elevate privileges locally. |
| Integer overflow in WebView in Google Chrome on Android prior to 149.0.7827.53 allowed a local attacker to cause a denial of service via a malicious file. (Chromium security severity: Low) |
| An integer overflow or wraparound vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to compromise the security of the system.
We have already fixed the vulnerability in the following versions:
QTS 5.2.9.3410 build 20260214 and later
QuTS hero h5.2.9.3410 build 20260214 and later
QuTS hero h5.3.4.3500 build 20260520 and later
QuTS hero h6.0.0.3397 build 20260206 and later |
| Issue summary: Parsing a crafted DER-encoded ASN.1 structure with a primitive
element whose content exceeds 2 gigabytes in length may cause a heap buffer
over-read on 64-bit Unix and Unix-like platforms.
Impact summary: The heap buffer over-read may crash the application (Denial of
Service) or to load into the decoded ASN.1 object contents of memory beyond the
end of the input buffer. More typically such ASN.1 elements would instead be
truncated.
An integer truncation in OpenSSL's ASN.1 decoder causes the content length of
an ASN.1 primitive element to be mishandled when it exceeds 2 gigabytes. In the
worst case the truncated length is treated as a request to scan the binary
content for a terminating zero byte, possibly causing OpenSSL to read either
less than or beyond the end of the allocated buffer.
Applications that pass attacker-supplied data to d2i_X509(), d2i_PKCS7(), or
any other d2i_* decoding function are affected. OpenSSL's own command-line
tools are not vulnerable, as data read through the BIO layer is checked before
it reaches the affected code. The issue only affects 64-bit Unix and Unix-like
platforms; 32-bit platforms and 64-bit Windows are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue,
as the affected code is outside the OpenSSL FIPS module boundary. |
| Heap buffer out-of-bounds write vulnerability due to integer overflow in Avira Antivirus engine when scanning a malformed MS-DOS executable file may allow Local Execution of Code or Denial-of-Service of the antivirus engine process.
This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.70.104. |
