| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The device directly executes .patch firmware upgrade files on a USB stick without any prior authentication in the admin interface. This leads to an unauthenticated code execution via the firmware upgrade function. |
| A weakness in Automated Logic and Carrier i-Vu Gen5 router on driver
version drv_gen5_106-01-2380, allows
malformed packets to be sent through BACnet MS/TP network causing the devices to enter a fault state. This fault state requires a manual power cycle to
return the device to network visibility. |
| A Improper Validation of Array Index issue affecting the v2_sdk_service running on a set of DJI drone devices on the port 10000 could allow an attacker to corrupt a controlled memory location due to a missing input validation in the on_receive_session_packet_ack function implemented in the libv2_sdk.so library used by the dji_vtwo_sdk binary implementing the service, potentially leading to a memory information leak or to an arbitrary code execution. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620. |
| Admin cookies are written in clear-text in logs. An attacker can retrieve them and bypass the authentication mechanism. As for the affected products/models/versions, see the reference URL. |
| Improper validation of an array index in the AMD graphics driver software could allow an attacker to pass malformed arguments to the dynamic power management (DPM) functions resulting in an out of bounds read and loss of availability. |
| Panasonic IR Control Hub (IR Blaster) versions 1.17 and earlier may allow an attacker with physical access to load unauthorized firmware onto the device. |
| Improper validation of an array index in the AND power Management Firmware could allow a privileged attacker to corrupt AGESA memory potentially leading to a loss of integrity. |
| Taiko Alethia is an Ethereum-equivalent, permissionless, based rollup designed to scale Ethereum without compromising its fundamental properties. In 2.3.1 and earlier, TaikoInbox._verifyBatches (packages/protocol/contracts/layer1/based/TaikoInbox.sol:627-678) advanced the local tid to whatever transition matched the current blockHash before knowing whether that batch would actually be verified. When the loop later broke (e.g., cooldown window not yet passed or transition invalidated), the function still wrote that newer tid into batches[lastVerifiedBatchId].verifiedTransitionId after decrementing batchId. Result: the last verified batch could end up pointing at a transition index from the next batch (often zeroed), corrupting the verified chain pointer. |
| Hardware logic contains race conditions in some Intel(R) Processors may allow an authenticated user to potentially enable partial information disclosure via local access. |
| A heap-based buffer overflow vulnerability exists in the lossless_jpeg_load_raw functionality of LibRaw Commit 0b56545 and Commit d20315b. A specially crafted malicious file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability. |
| go-git is an extensible git implementation library written in pure Go. Prior to version 5.17.1, go-git’s index decoder for format version 4 fails to validate the path name prefix length before applying it to the previously decoded path name. A maliciously crafted index file can trigger an out-of-bounds slice operation, resulting in a runtime panic during normal index parsing. This issue only affects Git index format version 4. Earlier formats (go-git supports only v2 and v3) are not vulnerable to this issue. This issue has been patched in version 5.17.1. |
| The issue was addressed with improved checks. This issue is fixed in Safari 18.3, iOS 18.3 and iPadOS 18.3, macOS Sequoia 15.3, tvOS 18.3, visionOS 2.3, watchOS 11.3. Processing maliciously crafted web content may lead to memory corruption. |
| Duplicate of CVE-2026-32286 |
| free5GC is an open source 5G core network. free5GC CHF prior to version 1.2.2 has an out-of-bounds slice access vulnerability in the CHF `nchf-convergedcharging` service. A valid authenticated request to PUT `/nchf-convergedcharging/v3/recharging/:ueId?ratingGroup=...` can trigger a server-side panic in `github.com/free5gc/chf/internal/sbi.(*Server).RechargePut(...)` due to an out-of-range slice access. In the reported runtime, Gin recovery converts the panic into HTTP 500, but the recharge path remains remotely panic-triggerable and can be abused repeatedly to degrade recharge functionality and flood logs. In deployments without equivalent recovery handling, this panic may cause more severe service disruption. free5GC CHF patches the issue. Some workarounds are available: Restrict access to the `nchf-convergedcharging` recharge endpoint to strictly trusted NF callers only; apply rate limiting or network ACLs in front of the CHF SBI interface to reduce repeated panic-trigger attempts; if the recharge API is not required, temporarily disable or block external reachability to this route; and/or ensure panic recovery, monitoring, and alerting are enabled. |
| Ella Core is a 5G core designed for private networks. Versions prior to 1.6.0 panic when processing NGAP messages with invalid PDU Session IDs outside of 1-15. An attacker able to send crafted NGAP messages to Ella Core can crash the process, causing service disruption for all connected subscribers. No authentication is required. Version 1.6.0 added PDU Session ID validations during NGAP message handling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: fix invalid array index in rose_kill_by_device()
rose_kill_by_device() collects sockets into a local array[] and then
iterates over them to disconnect sockets bound to a device being brought
down.
The loop mistakenly indexes array[cnt] instead of array[i]. For cnt <
ARRAY_SIZE(array), this reads an uninitialized entry; for cnt ==
ARRAY_SIZE(array), it is an out-of-bounds read. Either case can lead to
an invalid socket pointer dereference and also leaks references taken
via sock_hold().
Fix the index to use i. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
TID getting from ieee80211_get_tid() might be out of range of array size
of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise,
UBSAN warn:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30
index 10 is out of range for type 'rtl_tid_data [9]' |
| Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Versions 0.60.0 through 1.0.0, 1.1.0 through 1.3.2, 1.4.0 through 1.6.0, 1.7.0 through 1.9.0, 1.10.0, and 1.10.1 have a denial-of-service vulnerability in that allows any user who can create a TaskRun or PipelineRun to crash the controller cluster-wide by setting .spec.taskRef.resolver (or .spec.pipelineRef.resolver) to a string of 31+ characters. The crash occurs because GenerateDeterministicNameFromSpec produces a name exceeding the 63-character DNS-1123 label limit, and its truncation logic panics on a [-1] slice bound since the generated name contains no spaces. Once crashed, the controller enters a CrashLoopBackOff on restart (as it re-reconciles the offending resource), blocking all CI/CD reconciliation until the resource is manually deleted. Built-in resolvers (git, cluster, bundles, hub) are unaffected due to their short names, but any custom resolver name triggers the bug. The fix truncates the resolver-name prefix instead of the full string, preserving the hash suffix for determinism and uniqueness. This issue has been patched in versions 1.0.1, 1.3.3, 1.6.1, 1.9.2 and 1.10.2. |
| Improper Validation of Array Index (CWE-129) in multiple protocol parser components in Packetbeat can lead Denial of Service via Input Data Manipulation (CAPEC-153). An attacker with the ability to send specially crafted, malformed network packets to a monitored network interface can trigger out-of-bounds read operations, resulting in application crashes or resource exhaustion. This requires the attacker to be positioned on the same network segment as the Packetbeat deployment or to control traffic routed to monitored interfaces. |
