Export limit exceeded: 360854 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360854 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53259 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: anycast: insert aca into global hash under idev->lock syzbot reported a splat [1]: a slab-use-after-free in ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash under RCU and dereferences a struct ifacaddr6 that has already been freed while still linked in the hash, so a later reader walks into a dangling node. In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then aca_get() bumps it to 2 to keep it alive across the unlocked region. It is published to idev->ac_list under idev->lock, but ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL) can slip into that window: CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL) ------------------------------ ------------------------------------ aca_alloc() refcnt 1 aca_get() refcnt 2 write_lock_bh(idev->lock) add aca to ac_list write_unlock_bh(idev->lock) write_lock_bh(idev->lock) pull aca off ac_list write_unlock_bh(idev->lock) ipv6_del_acaddr_hash(aca) hlist_del_init_rcu() is a no-op, aca is not in the hash yet aca_put() refcnt 2->1 ipv6_add_acaddr_hash(aca) aca now inserted into the hash aca_put() refcnt 1->0 call_rcu(aca_free_rcu) -> kfree(aca) The hash removal becomes a no-op because the insertion has not happened yet, so once CPU0 inserts and drops the last reference, the aca is freed while still linked in inet6_acaddr_lst[], and readers dereference freed memory after the slab slot is reused. This window opened once RTNL stopped serializing the join path against device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock section so the ac_list and hash insertions are atomic with respect to teardown: a racing remover now either misses the aca entirely or finds it in both lists. acaddr_hash_lock is now nested under idev->lock, which is acquired in softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh() to avoid the irq lock inversion reported in [2]. [1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a [2] https://lore.kernel.org/netdev/6a194ef7.ba3b1513.1890b4.0000.GAE@google.com/ | ||||
| CVE-2026-53258 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2026-53257 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: enforce HE/EHT cap/oper consistency Xiang Mei reports that mac80211 could crash if eht_cap is set but eht_oper isn't. Rather than fixing that for the individual user(s), enforce that both HE/EHT have consistent elements. | ||||
| CVE-2026-53256 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release(). | ||||
| CVE-2026-53255 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate advertising TLV before type checks tlv_data_is_valid() reads each advertising data field length from data[i], then inspects data[i + 1] for managed EIR types before checking that the current field still fits inside the supplied buffer. A malformed field whose length byte is the last byte of the buffer can therefore make the parser read one byte past the advertising data. KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING request reached that path: BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid() Read of size 1 Call trace: tlv_data_is_valid() add_advertising() hci_mgmt_cmd() hci_sock_sendmsg() Move the existing element-length check before any type-octet inspection so each non-empty element is proven to contain its type byte before the parser looks at data[i + 1]. | ||||
| CVE-2026-53254 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: validate skb length in MCC handlers The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. | ||||
| CVE-2026-53253 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: reject short frames before parsing A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload. Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads. For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the setup payload. struct bnep_setup_conn_req carries destination and source service UUIDs after that byte, each uuid_size bytes, so the parser now documents that tuple explicitly instead of leaving the pull length as an opaque multiplication. Validation reproduced this kernel report: KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790 The buggy address belongs to the object at ffff88800c0f7908 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 1-byte region [ffff88800c0f7908, ffff88800c0f7909) Read of size 1 Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?) | ||||
| CVE-2026-53252 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device. | ||||
| CVE-2026-53251 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync hci_get_route() returns a reference-counted hci_dev pointer via hci_dev_hold(). The function exits normally or with an error without ever releasing it. | ||||
| CVE-2026-53250 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees. | ||||
| CVE-2026-53249 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4. | ||||
| CVE-2026-53248 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix use-after-free in metadata dst teardown airoha_metadata_dst_free() runs metadata_dst_free() which frees the metadata_dst with kfree() immediately, bypassing the RCU grace period. In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from the skb to the metadata_dst. This function requires RCU read-side protection and the dst must remain valid until all RCU readers complete. Since metadata_dst_free() calls kfree() directly, an use-after-free can occur if any skb still holds a noref pointer to the dst when the driver tears it down. Replace metadata_dst_free() with dst_release() which properly goes through the refcount path: when the refcount drops to zero, it schedules the actual free via call_rcu_hurry(), ensuring all RCU readers have completed before the memory is freed. | ||||
| CVE-2026-53247 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst with kfree() immediately, bypassing the RCU grace period. In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from the skb to the metadata_dst. This function requires RCU read-side protection and the dst must remain valid until all RCU readers complete. Since metadata_dst_free() calls kfree() directly, a use-after-free can occur if any skb still holds a noref pointer to the dst when the driver tears it down. Replace metadata_dst_free() with dst_release() which properly goes through the refcount path: when the refcount drops to zero, it schedules the actual free via call_rcu_hurry(), ensuring all RCU readers have completed before the memory is freed. | ||||
| CVE-2026-53246 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing When a listening SCTP server processes a COOKIE_ECHO chunk, the cached peer INIT chunk embedded after the cookie is parsed and its parameters are later walked by sctp_process_init() using sctp_walk_params(). However, the chunk header length of this cached INIT chunk was not validated against the remaining buffer in the COOKIE_ECHO payload. If the length field is inflated, the parameter walk can run beyond the actual received data, leading to out-of-bounds reads and potential memory corruption during later parameter handling (e.g. STATE_COOKIE processing and kmemdup() copies). Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT chunk length does not exceed the available data in the COOKIE_ECHO buffer before it is used. | ||||
| CVE-2026-53245 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr In mrp_pdu_parse_vecattr(), vector attribute events are encoded three per byte and valen tracks the number of events left to process. The parser decrements valen after processing the first and second events from each event byte, but not after processing the third one. When valen is exactly a multiple of three, the loop continues after the last valid event and consumes the next byte as a new event byte, applying a spurious event to the MRP applicant state. Additionally, when valen is zero the parser unconditionally consumes attrlen bytes as FirstValue and advances the offset, even though per IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of zero and no FirstValue or Vector fields. This corrupts the offset for subsequent PDU parsing. Also, when valen exceeds three the loop crosses byte boundaries but the attribute value is not incremented between the last event of one byte and the first event of the next. This causes the first event of the next byte to use the same attribute value as the third event rather than the next consecutive value. Decrement valen after processing the third event, skip FirstValue consumption when valen is zero, and increment the attribute value at the end of each loop iteration. | ||||
| CVE-2026-53244 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: VFS: fix possible failure to unlock in nfsd4_create_file() atomic_create() in fs/namei.c drops the reference to the dentry when it returns an error. This behaviour was imported into dentry_create() so that it will drop the reference if an error is returned from atomic_create(), though not if vfs_create() returns an error (in the case where ->atomic_create is not supported). The caller - nfsd4_create_file() - is made aware of this by checking path->dentry, which will either be a counted reference to a dentry, or an error pointer. However the change to use start_creating()/end_creating() (which landed shortly before the dentry_create() change landed, though was likely developed around the same time) means that nfsd4_create_file() *needs* a valid dentry so that it can unlock the parent. The net result is that if NFSD exports a filesystem which uses ->atomic_create, and if a call to ->atomic_create returns an error, then nfsd4_create_file() will pass an error pointer to end_creating() and the parent will not be unlocked. Fix this by changing dentry_create() to make sure path->dentry is always a valid dentry, never an error-pointer. The actual error is already returned a different way. Note that if ->atomic_create() returns a different dentry (which may not be possible in practice) we are guaranteed (because it is only ever provided by d_spliace_alias()) that it will have the same d_parent and so it will have the same effect when passed to end_creating(). | ||||
| CVE-2026-53243 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rseq: Fix using an uninitialized stack variable in rseq_exit_user_update() There is an bug in which an uninitialized stack variable is used in rseq_exit_user_update() as reported by syzbot: BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline] The local variable: struct rseq_ids ids = { .cpu_id = task_cpu(t), .mm_cid = task_mm_cid(t), .node_id = cpu_to_node(ids.cpu_id), }; According to the C standard, the evaluation order of expressions in an initializer list is indeterminately sequenced. The compiler (Clang, in this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before* `ids.cpu_id` is initialized with `task_cpu(t)`. This is fixed by moving the assignment of ids.node_id outside the structure initialization. | ||||
| CVE-2026-53240 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload __input_process_payload() stores first_skb into xtfs->ra_newskb under drop_lock when starting partial reassembly, then unlocks and breaks out of the processing loop. The post-loop check reads xtfs->ra_newskb without the lock to decide whether first_skb is still owned: if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb) Between spin_unlock and this read, a concurrent CPU running iptfs_reassem_cont() (or the drop_timer hrtimer) can complete reassembly, NULL xtfs->ra_newskb, and free the skb. The check then evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb operate on the freed skb — a use-after-free in skbuff_head_cache. Replace the unlocked read with a local bool that records whether first_skb was handed to the reassembly state in the current call. The flag is set after the existing spin_unlock, before the break, using the pointer equality that is stable at that point (first_skb == skb iff first_skb was stored in ra_newskb). | ||||
| CVE-2026-53238 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netlabel: validate unlabeled address and mask attribute lengths netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection. | ||||
| CVE-2026-53237 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. | ||||