| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper locking for some Intel(R) TDX Module firmware before version 1.5.13 may allow a privileged user to potentially enable escalation of privilege via local access. |
| An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network.
Affected Products:
EdgeMAX EdgeSwitch (Version 1.11.0 and earlier)
Mitigation:
Update the EdgeMAX EdgeSwitch to Version 1.11.1 or later. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in EverPress Mailster mailster allows Reflected XSS.This issue affects Mailster: from n/a through < 4.1.14. |
| Time-of-check Time-of-use race condition for some Intel(R) Connectivity Performance Suite software installers before version 40.24.11210 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Missing release of memory after effective lifetime in the UEFI OobRasMmbiHandlerDriver module for some Intel(R) reference server platforms may allow a privileged user to enable denial of service via local access. |
| The Addressing GLPI plugin enables you to create IP reports for visualize IP addresses used and free on a given network.. Starting with 3.0.0 and before 3.0.3, a poor security check allows an unauthenticated attacker to determine whether data exists (by name) in GLPI. |
| A vulnerability allowing local system users to modify directory contents, allowing for arbitrary code execution on the local system with elevated permissions. |
| Multiple Authenticated SQL Injection vulnerabilities found in UISP Application (Version 2.4.206 and earlier) could allow a malicious actor with low privileges to escalate privileges. |
| A security issue exists in FactoryTalk ViewPoint version 14.0 or below due to improper handling of MSI repair operations. During a repair, attackers can hijack the cscript.exe console window, which runs with SYSTEM privileges. This can be exploited to spawn an elevated command prompt, enabling full privilege escalation. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| Grafana is an open-source platform for monitoring and observability. The Infinity datasource plugin, maintained by Grafana Labs, allows visualizing data from JSON, CSV, XML, GraphQL, and HTML endpoints.
If the plugin was configured to allow only certain URLs, an attacker could bypass this restriction using a specially crafted URL. This vulnerability is fixed in version 3.4.1. |
| A vulnerability in the web application of ctrlX OS allows a remote unauthenticated attacker to conduct various attacks against users of the vulnerable system, including web cache poisoning or Man-in-the-Middle (MitM), via a crafted HTTP request. |
| A vulnerability in the users configuration file of ctrlX OS may allow a remote authenticated (low-privileged) attacker to recover the plaintext passwords of other users. |
| Nuxt is an open-source web development framework for Vue.js. Source code may be stolen during dev when using version 3.0.0 through 3.15.12 of the webpack builder or version 3.12.2 through 3.152 of the rspack builder and a victim opens a malicious web site. Because the request for classic script by a script tag is not subject to same origin policy, an attacker can inject a malicious script in their site and run the script. By using `Function::toString` against the values in `window.webpackChunknuxt_app`, the attacker can get the source code. Version 3.15.13 of Nuxt patches this issue. |
| In some circumstances, debug artifacts uploaded by the CodeQL Action after a failed code scanning workflow run may contain the environment variables from the workflow run, including any secrets that were exposed as environment variables to the workflow. Users with read access to the repository would be able to access this artifact, containing any secrets from the environment. This vulnerability is patched in CodeQL Action version 3.28.3 or later, or CodeQL CLI version 2.20.3 or later.
For some affected workflow runs, the exposed environment variables in the debug artifacts included a valid `GITHUB_TOKEN` for the workflow run, which has access to the repository in which the workflow ran, and all the permissions specified in the workflow or job. The `GITHUB_TOKEN` is valid until the job completes or 24 hours has elapsed, whichever comes first.
Environment variables are exposed only from workflow runs that satisfy all of the following conditions:
- Code scanning workflow configured to scan the Java/Kotlin languages.
- Running in a repository containing Kotlin source code.
- Running with debug artifacts enabled.
- Using CodeQL Action versions <= 3.28.2, and CodeQL CLI versions >= 2.9.2 (May 2022) and <= 2.20.2.
- The workflow run fails before the CodeQL database is finalized within the `github/codeql-action/analyze` step.
- Running in any GitHub environment: GitHub.com, GitHub Enterprise Cloud, and GitHub Enterprise Server. Note: artifacts are only accessible to users within the same GitHub environment with access to the scanned repo.
The `GITHUB_TOKEN` exposed in this way would only have been valid for workflow runs that satisfy all of the following conditions, in addition to the conditions above:
- Using CodeQL Action versions >= 3.26.11 (October 2024) and <= 3.28.2, or >= 2.26.11 and < 3.
- Running in GitHub.com or GitHub Enterprise Cloud only (not valid on GitHub Enterprise Server).
In rare cases during advanced setup, logging of environment variables may also occur during database creation of Java, Swift, and C/C++. Please read the corresponding CodeQL CLI advisory GHSA-gqh3-9prg-j95m for more details.
In CodeQL CLI versions >= 2.9.2 and <= 2.20.2, the CodeQL Kotlin extractor logs all environment variables by default into an intermediate file during the process of creating a CodeQL database for Kotlin code. This is a part of the CodeQL CLI and is invoked by the CodeQL Action for analyzing Kotlin repositories.
On Actions, the environment variables logged include GITHUB_TOKEN, which grants permissions to the repository being scanned.
The intermediate file containing environment variables is deleted when finalizing the database, so it is not included in a successfully created database. It is, however, included in the debug artifact that is uploaded on a failed analysis run if the CodeQL Action was invoked in debug mode.
Therefore, under these specific circumstances (incomplete database creation using the CodeQL Action in debug mode) an attacker with access to the debug artifact would gain unauthorized access to repository secrets from the environment, including both the `GITHUB_TOKEN` and any user-configured secrets made available via environment variables.
The impact of the `GITHUB_TOKEN` leaked in this environment is limited:
- For workflows on GitHub.com and GitHub Enterprise Cloud using CodeQL Action versions >= 3.26.11 and <= 3.28.2, or >= 2.26.11 and < 3, which in turn use the `actions/artifacts v4` library, the debug artifact is uploaded before the workflow job completes. During this time the `GITHUB_TOKEN` is still valid, providing an opportunity for attackers to gain access to the repository.
- For all other workflows, the debug artifact is uploaded after the workflow job completes, at which point the leaked `GITHUB_TOKEN` has been revoked and cannot be used to access the repository. |
| Observable timing discrepancy in firmware for some Intel(R) CSME and Intel(R) SPS may allow a privileged user to potentially enable information disclosure via local access. |
| CKAN is an open-source DMS (data management system) for powering data hubs and data portals. Using a specially crafted file, a user could potentially upload a file containing code that when executed could send arbitrary requests to the server. If that file was opened by an administrator, it could lead to escalation of privileges of the original submitter or other malicious actions. Users must have been registered to the site to exploit this vulnerability. This vulnerability has been fixed in CKAN 2.10.7 and 2.11.2. Users are advised to upgrade. On versions prior to CKAN 2.10.7 and 2.11.2, site maintainers can restrict the file types supported for uploading using the `ckan.upload.user.mimetypes` / `ckan.upload.user.types` and `ckan.upload.group.mimetypes` / `ckan.upload.group.types` config options. To entirely disable file uploads users can use: `ckan.upload.user.types = none` |
| A vulnerability in OTRS Application Server and reverse proxy settings allows session hijacking due to missing attributes for sensitive cookie settings in HTTPS sessions.
This issue affects:
* OTRS 7.0.X
* OTRS 8.0.X
* OTRS 2023.X
* OTRS 2024.X |
| Teleport provides connectivity, authentication, access controls and audit for infrastructure. Community Edition versions before and including 17.5.1 are vulnerable to remote authentication bypass. At time of posting, there is no available open-source patch. |
| A Missing Authentication for Critical Function vulnerability in the UniFi Connect EV Station Pro may allow a malicious actor with physical or adjacent access to perform an unauthorized factory reset.
Affected Products:
UniFi Connect EV Station Pro (Version 1.5.18 and earlier)
Mitigation:
Update UniFi Connect EV Station Pro to Version 1.5.27 or later |
