| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unauthenticated remote attacker can trick a high privileged user into uploading a malicious payload via the config-upload endpoint, leading to code injection as root. This results in a total loss of confidentiality, availability and integrity due to improper control of code generation ('Code Injection’). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential cfid UAF in smb2_query_info_compound
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Reinitialize cfid to NULL under the replay label.
Example trace (trimmed):
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110
[...]
RIP: 0010:refcount_warn_saturate+0x9c/0x110
[...]
Call Trace:
<TASK>
smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? step_into+0x10d/0x690
? __legitimize_path+0x28/0x60
smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? kmem_cache_alloc+0x18a/0x340
? getname_flags+0x46/0x1e0
cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
statfs_by_dentry+0x67/0x90
vfs_statfs+0x16/0xd0
user_statfs+0x54/0xa0
__do_sys_statfs+0x20/0x50
do_syscall_64+0x58/0x80 |
| A local privilege-escalation vulnerability has been discovered in the HPE Aruba Networking Virtual Intranet Access (VIA) client. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges. |
| Incorrect default permissions for some Intel(R) Chipset Software before version 10.1.20266.8668 or later. within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A broken access control vulnerability exists in HPE Aruba Networking EdgeConnect OS (ECOS). Successful exploitation could allow an attacker to bypass firewall protections, potentially leading to unauthorized traffic being handled improperly |
| Use of uninitialized variable for some TDX Module before version tdx1.5 within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Out-of-bounds read for some TDX before version tdx module 1.5.24 within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| gitoxide is an implementation of git written in Rust. Before 0.42.0, gitoxide uses SHA-1 hash implementations without any collision detection, leaving it vulnerable to hash collision attacks. gitoxide uses the sha1_smol or sha1 crate, both of which implement standard SHA-1 without any mitigations for collision attacks. This means that two distinct Git objects with colliding SHA-1 hashes would break the Git object model and integrity checks when used with gitoxide. This vulnerability is fixed in 0.42.0. |
| Improper handling of values in the microcode flow for some Intel(R) Processor Family may allow an escalation of privilege. Startup code and smm adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (low), integrity (low) and availability (none) impacts. |
| Exposure of sensitive information during transient execution for some TDX within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| mitmproxy is a interactive TLS-capable intercepting HTTP proxy for penetration testers and software developers and mitmweb is a web-based interface for mitmproxy. In mitmweb 11.1.1 and below, a malicious client can use mitmweb's proxy server (bound to `*:8080` by default) to access mitmweb's internal API (bound to `127.0.0.1:8081` by default). In other words, while the cannot access the API directly, they can access the API through the proxy. An attacker may be able to escalate this SSRF-style access to remote code execution. The mitmproxy and mitmdump tools are unaffected. Only mitmweb is affected. This vulnerability has been fixed in mitmproxy 11.1.2 and above. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| On most desktop platforms, Brave Browser versions 1.70.x-1.73.x included a feature to show a site's origin on the OS-provided file selector dialog when a site prompts the user to upload or download a file. However the origin was not correctly inferred in some cases. When combined with an open redirector vulnerability on a trusted site, this could allow a malicious site to initiate a download whose origin in the file select dialog appears as the trusted site which initiated the redirect. |
| Path Traversal: '.../...//' vulnerability in WPMU DEV - Your All-in-One WordPress Platform Smush Image Compression and Optimization wp-smushit allows Path Traversal.This issue affects Smush Image Compression and Optimization: from n/a through <= 3.17.0. |
| Undici is an HTTP/1.1 client. Starting in version 4.5.0 and prior to versions 5.28.5, 6.21.1, and 7.2.3, undici uses `Math.random()` to choose the boundary for a multipart/form-data request. It is known that the output of `Math.random()` can be predicted if several of its generated values are known. If there is a mechanism in an app that sends multipart requests to an attacker-controlled website, they can use this to leak the necessary values. Therefore, an attacker can tamper with the requests going to the backend APIs if certain conditions are met. This is fixed in versions 5.28.5, 6.21.1, and 7.2.3. As a workaround, do not issue multipart requests to attacker controlled servers. |
| Improper input validation for some Server Firmware Update Utility(SysFwUpdt) before version 16.0.12 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable local code execution. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| The Logo Slider WordPress plugin before 4.9.0 does not validate and escape some of its slider options before outputting them back in the dashboard, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks. |
| An ownership verification issue in the Virtual Desktop preview page in the Research and Engineering Studio (RES) on AWS before version 2025.09 may allow an authenticated remote user to view another user's active desktop session metadata, including periodical desktop preview screenshots.
To mitigate this issue, users should upgrade to version 2025.09 or above. |
| A flaw was found in Keycloak. When the logging format is configured to a verbose, user-supplied pattern (such as the pre-defined 'long' pattern), sensitive headers including Authorization and Cookie are disclosed to the logs in cleartext. An attacker with read access to the log files can extract these credentials (e.g., bearer tokens, session cookies) and use them to impersonate users, leading to a full account compromise. |
| Heimdall Data Database Proxy Cross-Site Scripting Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Heimdall Data Database Proxy. Minimal user interaction is required to exploit this vulnerability.
The specific flaw exists within the handling of the database event logs. The issue results from the lack of proper validation of user-supplied data, which can lead to the injection of arbitrary script. An attacker can leverage this vulnerability to interact with the application in the context of the target user. Was ZDI-CAN-24755. |
