Export limit exceeded: 345450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17584 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49293 | 1 Linux | 1 Linux Kernel | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: initialize registers in nft_do_chain() Initialize registers to avoid stack leak into userspace. | ||||
| CVE-2022-49306 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: host: Stop setting the ACPI companion It is no longer needed. The sysdev pointer is now used when assigning the ACPI companions to the xHCI ports and USB devices. Assigning the ACPI companion here resulted in the fwnode->secondary pointer to be replaced also for the parent dwc3 device since the primary fwnode (the ACPI companion) was shared. That was unintentional and it created potential side effects like resource leaks. | ||||
| CVE-2024-57888 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker After commit 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") amdgpu started seeing the following warning: [ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu] ... [ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched] ... [ ] Call Trace: [ ] <TASK> ... [ ] ? check_flush_dependency+0xf5/0x110 ... [ ] cancel_delayed_work_sync+0x6e/0x80 [ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu] [ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu] [ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu] [ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched] [ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu] [ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched] [ ] process_one_work+0x217/0x720 ... [ ] </TASK> The intent of the verifcation done in check_flush_depedency is to ensure forward progress during memory reclaim, by flagging cases when either a memory reclaim process, or a memory reclaim work item is flushed from a context not marked as memory reclaim safe. This is correct when flushing, but when called from the cancel(_delayed)_work_sync() paths it is a false positive because work is either already running, or will not be running at all. Therefore cancelling it is safe and we can relax the warning criteria by letting the helper know of the calling context. References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") | ||||
| CVE-2024-38593 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: micrel: Fix receiving the timestamp in the frame for lan8841 The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. | ||||
| CVE-2024-38564 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks. | ||||
| CVE-2022-35715 | 3 Ibm, Linux, Microsoft | 4 Aix, Infosphere Information Server, Linux Kernel and 1 more | 2025-10-20 | 7.5 High |
| IBM InfoSphere Information Server 11.7 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in a stack trace. This information could be used in further attacks against the system. IBM X-Force ID: 231202. | ||||
| CVE-2024-57844 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix fault on fd close after unbind If userspace holds an fd open, unbinds the device and then closes it, the driver shouldn't try to access the hardware. Protect it by using drm_dev_enter()/drm_dev_exit(). This fixes the following page fault: <6> [IGT] xe_wedged: exiting, ret=98 <1> BUG: unable to handle page fault for address: ffffc901bc5e508c <1> #PF: supervisor read access in kernel mode <1> #PF: error_code(0x0000) - not-present page ... <4> xe_lrc_update_timestamp+0x1c/0xd0 [xe] <4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe] <4> xe_exec_queue_fini+0x16/0xb0 [xe] <4> __guc_exec_queue_fini_async+0xc4/0x190 [xe] <4> guc_exec_queue_fini_async+0xa0/0xe0 [xe] <4> guc_exec_queue_fini+0x23/0x40 [xe] <4> xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> xe_file_close+0xd4/0x1a0 [xe] <4> drm_file_free+0x210/0x280 [drm] <4> drm_close_helper.isra.0+0x6d/0x80 [drm] <4> drm_release_noglobal+0x20/0x90 [drm] (cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8) | ||||
| CVE-2024-57880 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Add space for a terminator into DAIs array The code uses the initialised member of the asoc_sdw_dailink struct to determine if a member of the array is in use. However in the case the array is completely full this will lead to an access 1 past the end of the array, expand the array by one entry to include a space for a terminator. | ||||
| CVE-2024-57879 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Always release hdev at the end of iso_listen_bis Since hci_get_route holds the device before returning, the hdev should be released with hci_dev_put at the end of iso_listen_bis even if the function returns with an error. | ||||
| CVE-2024-57839 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()" This reverts commit 7c877586da3178974a8a94577b6045a48377ff25. Anders and Philippe have reported that recent kernels occasionally hang when used with NFS in readahead code. The problem has been bisected to 7c877586da3 ("readahead: properly shorten readahead when falling back to do_page_cache_ra()"). The cause of the problem is that ra->size can be shrunk by read_pages() call and subsequently we end up calling do_page_cache_ra() with negative (read huge positive) number of pages. Let's revert 7c877586da3 for now until we can find a proper way how the logic in read_pages() and page_cache_ra_order() can coexist. This can lead to reduced readahead throughput due to readahead window confusion but that's better than outright hangs. | ||||
| CVE-2024-57891 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix invalid irq restore in scx_ops_bypass() While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to rq_unlock() which could re-enable IRQ prematurely leading to the following warning: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Sched_ext: create_dsq (enabling) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : warn_bogus_irq_restore+0x30/0x40 lr : warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 (P) warn_bogus_irq_restore+0x30/0x40 (L) scx_ops_bypass+0x224/0x3b8 scx_ops_enable.isra.0+0x2c8/0xaa8 bpf_scx_reg+0x18/0x30 ... irq event stamp: 33739 hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8 hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8 Drop the stray _irqrestore(). | ||||
| CVE-2024-57805 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP The linkDMA should not be released on stop trigger since a stream re-start might happen without closing of the stream. This leaves a short time for other streams to 'steal' the linkDMA since it has been released. This issue is not easy to reproduce under normal conditions as usually after stop the stream is closed, or the same stream is restarted, but if another stream got in between the stop and start, like this: aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120 CTRL+z aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120 then the link DMA channels will be mixed up, resulting firmware error or crash. | ||||
| CVE-2024-57804 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. | ||||
| CVE-2024-57918 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix page fault due to max surface definition mismatch DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) | ||||
| CVE-2025-23242 | 2 Linux, Nvidia | 2 Linux Kernel, Riva | 2025-10-16 | 7.3 High |
| NVIDIA Riva contains a vulnerability where a user could cause an improper access control issue. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, or information disclosure. | ||||
| CVE-2025-23243 | 2 Linux, Nvidia | 2 Linux Kernel, Riva | 2025-10-16 | 6.5 Medium |
| NVIDIA Riva contains a vulnerability where a user could cause an improper access control issue. A successful exploit of this vulnerability might lead to data tampering or denial of service. | ||||
| CVE-2025-21651 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: don't auto enable misc vector Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. | ||||
| CVE-2025-21643 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete. | ||||
| CVE-2024-57800 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: memalloc: prefer dma_mapping_error() over explicit address checking With CONFIG_DMA_API_DEBUG enabled, the following warning is observed: DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single] WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430 CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759 debug_dma_unmap_page+0xe9/0xf0 snd_dma_wc_free+0x85/0x130 [snd_pcm] snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm] snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm] snd_pcm_ioctl+0x6a/0xc0 [snd_pcm] ... Check for returned DMA addresses using specialized dma_mapping_error() helper which is generally recommended for this purpose by Documentation/core-api/dma-api.rst. | ||||
| CVE-2025-6724 | 2 Chef, Linux | 4 Automate, Chef, Linux and 1 more | 2025-10-16 | 8.8 High |
| In Progress Chef Automate, versions earlier than 4.13.295, on Linux x86 platform, an authenticated attacker can gain access to Chef Automate restricted functionality in multiple services via improperly neutralized inputs used in an SQL command. | ||||