| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: Terminating the subsequent process of initialization failure
syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1]
After PSI initialization fails, the si member is accessed again, resulting
in this uaf.
After si initialization fails, the subsequent process needs to be exited.
[1]
BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline]
BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524
Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059
CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xd9/0x110 mm/kasan/report.c:634
vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78
vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194
vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973
dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline]
dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537
dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3ff/0xb70 fs/file_table.c:464
task_work_run+0x14e/0x250 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xad8/0x2d70 kernel/exit.c:938
do_group_exit+0xd3/0x2a0 kernel/exit.c:1087
__do_sys_exit_group kernel/exit.c:1098 [inline]
__se_sys_exit_group kernel/exit.c:1096 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096
x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f871d58d169
Code: Unable to access opcode bytes at 0x7f871d58d13f.
RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169
RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003
R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840
</TASK>
Allocated by task 6059:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kmalloc_noprof include/linux/slab.h:901 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970
vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423
vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194
vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973
dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline]
dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537
dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3ff/0xb70 fs/file_tabl
---truncated--- |
| A security flaw has been discovered in code-projects Online Appointment Booking System 1.0. The impacted element is an unknown function of the file /admin/deletemanagerclinic.php. Performing manipulation of the argument clinic results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cxusb: no longer judge rbuf when the write fails
syzbot reported a uninit-value in cxusb_i2c_xfer. [1]
Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw()
succeeds and rlen is greater than 0, the read operation of usb_bulk_msg()
will be executed to read rlen bytes of data from the dvb device into the
rbuf.
In this case, although rlen is 1, the write operation failed which resulted
in the dvb read operation not being executed, and ultimately variable i was
not initialized.
[1]
BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline]
BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196
cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline]
cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196
__i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1
i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315
i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343
i2c_master_send include/linux/i2c.h:109 [inline]
i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183
do_loop_readv_writev fs/read_write.c:848 [inline]
vfs_writev+0x963/0x14e0 fs/read_write.c:1057
do_writev+0x247/0x5c0 fs/read_write.c:1101
__do_sys_writev fs/read_write.c:1169 [inline]
__se_sys_writev fs/read_write.c:1166 [inline]
__x64_sys_writev+0x98/0xe0 fs/read_write.c:1166
x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: validate AG parameters in dbMount() to prevent crashes
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Initialize ssc before laundromat_work to prevent NULL dereference
In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through
nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized,
this can cause NULL pointer dereference.
Normally the delayed start of laundromat_work allows sufficient time for
nfsd_ssc initialization to complete. However, when the kernel waits too
long for userspace responses (e.g. in nfs4_state_start_net ->
nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done ->
cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the
delayed work may start before nfsd_ssc initialization finishes.
Fix this by moving nfsd_ssc initialization before starting laundromat_work. |
| In JetBrains TeamCity before 2025.11 maven embedder allowed loading extensions via project configuration |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Don't leave consecutive consumed OOB skbs.
Jann Horn reported a use-after-free in unix_stream_read_generic().
The following sequences reproduce the issue:
$ python3
from socket import *
s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
s1.send(b'x', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'y', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'z', MSG_OOB)
s2.recv(1) # recv 'z' illegally
s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free)
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
skb = skb_peek_next(skb, &sk->sk_receive_queue);
...
}
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr ffff888106ef2904 by task python3/315
CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:636)
unix_stream_read_actor (net/unix/af_unix.c:3027)
unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f8911fcea06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06
RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006
RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20
R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:348)
kmem_cache_alloc_
---truncated--- |
| In JetBrains TeamCity before 2025.11 stored XSS was possible on agentpushInstall page |
| In JetBrains TeamCity before 2025.11 port enumeration was possible via the Perforce connection test |
| In JetBrains TeamCity before 2025.11 reflected XSS was possible on VCS Root setup |
| In JetBrains TeamCity before 2025.11 a DOM-based XSS was possible on the OAuth connections tab |
| In the Linux kernel, the following vulnerability has been resolved:
media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode()
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling. |
| In JetBrains TeamCity before 2025.11.1 excessive privileges were possible due to storing GitHub personal access token instead of an installation token |
| A local file inclusion (LFI) vulnerability in RiteCMS v3.1.0 allows attackers to read arbitrary files on the host via a directory traversal in the admin_language_file and default_page_language_file in the admin.php component |
| A Cross-Site Request Forgery (CSRF) in the page creation/editing function of RiteCMS v3.1.0 allows attackers to arbitrarily create pages via a crafted POST request. |
| Incorrect access control in the /templates/ component of RiteCMS v3.1.0 allows attackers to access sensitive files via directory traversal. |
| A reflected cross-site scripting (XSS) vulnerability in RiteCMS v3.1.0 allows attackers to execute arbitrary code in the context of a user's browser via a crafted payload. |
| RiteCMS v3.1.0 was discovered to use insecure encryption to store passwords. |
| RiteCMS v3.1.0 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the parse_special_tags() function. |
| Exim 4.98 before 4.98.1, when SQLite hints and ETRN serialization are used, allows remote SQL injection. (Resolving SQL injection requires an update to 4.99.1 in certain non-default rate-limit configurations.) |
