| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| TypeBot is a chatbot builder tool. Prior to version 3.17.0, an authenticated user who has read access to any typebot can resume a waiting webhook session that belongs to a different typebot by mixing an authorized `typebotId` and `blockId` and a foreign live `resultId`. The webhook resume handler authorizes the parent typebot first, but then resolves the descendant `result` only by `resultId`. As a result, an attacker can inject arbitrary webhook JSON into another typebot's suspended session and advance its execution without any access to the victim typebot. Version 3.17.0 patches the issue. |
| Out-of-bounds write in the firmware for the Intel(R) Slim Bootloader may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| is affected by a Use of Hard-coded Cryptographic Key vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized read and write access. Exploitation of this issue does not require user interaction. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid
sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the
capacity limit for ep->auth_chunk_list, allowing it to hold up to
20 chunk entries (param_hdr.length up to 24). However, the copy
destination asoc->c.auth_chunks in struct sctp_cookie is only
SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16
chunks are added, sctp_association_init() memcpy overflows the
destination by up to 4 bytes.
Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching
the destination capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix FDIR filter leak on remove
Perfect FDIR filters can be added while the interface is down and are
kept on the software list for later restore. unregister_netdev() only
calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in
txgbe_close() is skipped in that case and the filters are leaked on
driver remove. Free the filter list from txgbe_remove() as well. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/intel: Fix out-of-bounds memset in dmar_latency_disable()
dmar_latency_disable() intends to zero out only the single
latency_statistic entry for the given type, but the memset size was
computed as sizeof(*lstat) * DMAR_LATENCY_NUM, which clears the entire
array starting from &lstat[type].
When type > 0, this writes beyond the end of the allocated array,
corrupting adjacent memory.
Fix by using sizeof(*lstat) to clear only the target entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: bound uAP association event IEs to the event buffer
mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the
(re)association request IEs that the firmware copies into the event:
sinfo->assoc_req_ies = &event->data[len];
len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control;
sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len;
event->len is supplied by the device firmware and is never validated,
and the subtraction is unchecked. assoc_req_ies points into
adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the
kmalloc()'d struct mwifiex_adapter.
On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with
cfg80211_find_ie(), whose for_each_element() loop dereferences each
element header. A firmware-reported event->len larger than the bytes
actually received makes assoc_req_ies_len describe IEs that extend past
event_body, so the walk reads out of the adapter slab object, a
slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie).
An event->len smaller than the header instead makes the int subtraction
negative, which wraps to a huge size_t when stored in assoc_req_ies_len.
The same length is handed to cfg80211_new_sta(), so a more modest
over-claim can also copy stale event_body bytes into the
NL80211_CMD_NEW_STATION notification.
A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver
such an event while the interface is in AP/uAP mode.
Validate event->len before use: reject a length that underflows the
header or that would place the IEs outside the event_body[] buffer the
event was copied into. event->len here is struct mwifiex_assoc_event.len,
a payload field internal to this event, not the transport frame length,
so it is validated in this handler rather than at the generic
MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the
transport frame length. The bound is against event_body[MAX_EVENT_SIZE]
rather than the actually-received length because the transports store the
event differently (USB and SDIO leave the 4-byte event header in
event_skb, PCIe strips it via skb_pull), whereas event_body is the single
fixed buffer all of them copy the event into. This is the event-path
analogue of the receive-path bounds checks added in commit 119585281617
("wifi: mwifiex: Fix OOB and integer underflow when rx packets"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix potential use-after-free in airoha_ppe_deinit()
airoha_ppe_deinit() replaces the NPU pointer with NULL via
rcu_replace_pointer() but does not wait for existing RCU readers
to exit before calling ppe_deinit() and airoha_npu_put(). This can
cause a use-after-free if a reader in an RCU read-side critical
section still holds a reference to the NPU when it is freed.
The init path (airoha_ppe_init) already calls synchronize_rcu()
after rcu_assign_pointer(), but the deinit path introduced in
commit 6abcf751bc08 ("net: airoha: Fix schedule while atomic in
airoha_ppe_deinit()") omitted the matching barrier when switching
from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer().
Add synchronize_rcu() before ppe_deinit() to ensure all existing
RCU readers have completed before the NPU resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The switch port connect path stores
that device in mac->mc_dev and keeps it for the lifetime of the connected
MAC object.
However, the disconnect path only closes the MAC and frees the dpaa2_mac
object. It does not drop the endpoint device reference stored in
mac->mc_dev, so every successful connect leaks that device reference when
the MAC is later disconnected.
Drop the endpoint device reference before freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: drop incoming messages that cross network namespace boundaries
rds_find_bound() looks up the destination socket using a global
rhashtable keyed solely on (addr, port, scope_id). Network namespaces
are not part of the key, so a sender in netns A can deliver an incoming
message (inc) to a socket that lives in a different netns B.
When this happens, inc->i_conn points to an rds_connection whose c_net
is netns A, but the receiving rs lives in netns B. Once the child
process that created netns A exits, cleanup_net() calls
rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(),
freeing that connection. If the survivor socket in netns B still holds
the inc, any subsequent dereference of inc->i_conn is a use-after-free.
There are two dangerous sites in rds_clear_recv_queue():
1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200)
read via rds_recv_rcvbuf_delta() -- confirmed by KASAN.
2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80)
called via rds_inc_put() when the inc refcount reaches zero -- same
race window, potential call-through-freed-object primitive.
The bug is reachable from unprivileged user namespaces
(CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8.
Fix this by rejecting the delivery in rds_recv_incoming() when the
socket returned by rds_find_bound() belongs to a different network
namespace than the connection that carried the message. Use the
existing rds_conn_net() / sock_net() helpers and net_eq() for the
comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: synchronize delayed set_alt with teardown
The f_tcm set_alt() path defers endpoint setup to a work item and
completes the delayed status response from process context. The delayed
work uses f_tcm private state and may complete the setup request after
disconnect or function teardown has already moved on.
Cancel and drain the delayed set_alt work when the function is unbound or
freed. For disable paths, which are reached under the composite device
lock, use a small state machine and a non-sleeping cancellation path
instead of cancel_work_sync(). If the work is already running, mark it
cancelled and let the worker own the cleanup; otherwise tcm_disable() can
cancel the queued work and clean up immediately.
Also serialize the final delayed-status completion with the cancellation
check while holding the composite device lock. This prevents a disconnect
from clearing delayed_status while the worker is about to complete the
control request.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? tcm_delayed_set_alt+0x6c/0xef0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? tcm_delayed_set_alt+0x6c/0xef0
kasan_report+0xe0/0x110
? tcm_delayed_set_alt+0x6c/0xef0
tcm_delayed_set_alt+0x6c/0xef0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? process_one_work+0x4cb/0xb90
? rcu_is_watching+0x20/0x50
? tcm_delayed_set_alt+0x9/0xef0
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 544:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
tcm_alloc+0x68/0x180
usb_get_function+0x36/0x60
config_usb_cfg_link+0x125/0x1b0
configfs_symlink+0x322/0x890
vfs_symlink+0xc2/0x270
filename_symlinkat+0x295/0x2f0
__x64_sys_symlinkat+0x62/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 661:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x2f9/0x530
config_usb_cfg_unlink+0x173/0x1e0
configfs_unlink+0x1fa/0x340
vfs_unlink+0x15c/0x510
filename_unlinkat+0x2ba/0x450
__x64_sys_unlinkat+0x63/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: printer: fix infinite loop in printer_read()
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately. |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: add locking for raw flags bitfield
With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in
struct raw_sock") the formerly separate integer values have been integrated
into a single bitfield. This led to a read-modify-write operation when
changing a flag in raw_setsockopt() which now needs a locking to prevent
concurrent access.
Instead of adding a lock/unlock hell in each of the flag manipulations this
patch introduces a wrapper for a new raw_setsockopt_locked() function
analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c
[mkl: use Closes tag instead of Link] |
| ColdFusion is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploit depends on conditions beyond the attacker's control. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix use after free in unlock_ovpn()
unlock_ovpn() iterates over the release_list using llist_for_each_entry()
and drops the peer reference inside the loop body via ovpn_peer_put().
If this drops the last reference, the peer is eventually freed. However,
llist_for_each_entry() reads peer->release_entry.next in the loop advance
expression, which runs after the body. By that time the peer may have
already been freed, resulting in a use after free when advancing to the
next list entry.
Fix this by using llist_for_each_entry_safe(), which caches the next
pointer before executing the loop body. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: avoid putting unrelated P2P peer on socket release
ovpn_peer_release_p2p() is called when an OVPN UDP socket is being
destroyed. It checks the currently published P2P peer and releases it only
if that peer still uses the socket being destroyed.
A peer replacement can publish a new peer before the old UDP socket is
destroyed. When the old socket destruction path runs afterwards,
ovpn_peer_release_p2p() observes the new peer through ovpn->peer. Since the
new peer uses a different socket, the function takes the socket mismatch
branch.
That branch still calls ovpn_peer_put(peer). At this point, however, peer
is the currently published replacement peer, not the peer associated with
the socket being destroyed. Dropping its reference can free it while
ovpn->peer still points to it, leading to later use-after-free accesses
from the peer and socket cleanup paths.
KASAN reports this as a slab-use-after-free on the kmalloc-1k ovpn_peer
object. In the reproducer, the object is allocated from ovpn_peer_new() via
ovpn_nl_peer_new_doit(), and freed through ovpn_peer_release_rcu() from RCU
callback processing. Observed access sites include ovpn_peer_remove(),
ovpn_socket_release(), ovpn_nl_peer_del_notify(), and unlock_ovpn().
Fix this by returning from the socket mismatch branch without putting the
peer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: validate and free ACPI mute object
cs35l41_get_acpi_mute_state() evaluates a _DSM method to get the ACPI
mute state and reads the first byte from the returned object.
However, the returned ACPI object is owned by the caller and is never
freed after use, so each successful query leaks the _DSM result object.
The code also assumes that the returned object is a buffer with at least
one byte. A malformed firmware response can return a different object
type or an empty buffer, and the direct ret->buffer.pointer dereference
can then access an invalid pointer.
Use the typed _DSM helper, validate that the returned buffer contains at
least one byte, and free the ACPI object after reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: fix OOB read from off-by-two in TX status handler
The bounds check in carl9170_tx_process_status() uses
`i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing
2 extra iterations past valid _tx_status entries when the firmware-
controlled hdr.ext exceeds hdr.len/2. Fix by using the correct
comparison `i >= (cmd->hdr.len / 2)`. |
