| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CVX is not resilient to unexpected messages from a connected switch. This leads to agent crashes on CVX causing instability in the CVX cluster. An attacker could use this behavior to create a denial of service (DoS) scenario. Note that this would require the attacker to have a high privilege access to the connected switch to be able to send custom TCP packets to the CVX. |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain an uninitialized heap read in the SquashFS archive handler caused by a sparsely populated index array. In the SquashFS handler, _blockToNode is allocated with capacity for every metadata block but populated only when an inode crosses a block boundary, so a crafted image with few inodes spanning many blocks leaves most slots holding raw heap contents (the underlying allocator does not zero-initialize POD storage). When OpenDir looks up an attacker-influenced blockIndex (derived from the RootInode superblock field), it reads two of these uninitialized slots and passes them as the left/right bounds of a binary search over _nodesPos, which dereferences the midpoint without bounds checking; if the resulting value happens to match the search key, the returned index is used to read a full node struct from _nodes whose fields feed further directory parsing, forming a chained OOB read primitive that is heap-layout-dependent and not reliably triggerable. The SquashFS handler is enabled by default in stock 7z.dll and the issue triggers during Open() with no interaction beyond opening the file; impact is denial of service from wild-pointer dereference and potential heap information disclosure, with no write primitive. Version 26.01 fixes the issue. |
| An authenticated Redis session could be used to obtain full root access to all servers in the CVX cluster. Note that this would require an attacker to have both network access to the Redis service on a CVX server and the Redis password. Please note that all Redis communication, including authentication, occurs over plaintext in the present day. TLS support is tracked under RFE1294850. |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.21 through 26.00 contain an off-by-one out-of-bounds read vulnerability in the ParseDepedencyExpression function of the UEFI firmware image parser(CPP/7zip/Archive/UefiHandler.cpp). The function validates an attacker-controlled opcode byte using > instead of >= against the element count of the 10-entry kExpressionCommands static array, allowing an opcode value of 10 to read one pointer slot (8 bytes on x64) past the end of the array in .rodata. The out-of-bounds value is then dereferenced as a const char * and passed through strlen and memcpy into the archive's Characts property, which may cause either a denial of service (access violation when the adjacent bytes do not form a valid readable pointer) or a minor information disclosure of an adjacent .rdata string literal into archive metadata. The vulnerability is reached automatically during IInArchive::Open() via the call path OpenFv/OpenCapsule → ParseVolume → ParseSections when processing a SECTION_DXE_DEPEX (0x13) or SECTION_PEI_DEPEX (0x1B) section whose first body byte is 0x0A, and the UEFI handler is enabled by default in stock 7z.dll with signature-based detection for both UEFIc and UEFIf formats. The outcome (crash vs. silent leak) is deterministic per build but linker-layout dependent, with no write primitive and no disclosure of heap data, secrets, or ASLR base addresses. Version 26.01 fixes the issue. |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain a heap out-of-bounds read in 7-Zip Ar handler BSD SYMDEF parser. A 4-byte heap out-of-bounds read exists in the Unix ar archive parser in 7-Zip. When parsing a BSD-style __.SYMDEF symbol table, the ParseLibSymbols function reads a 32-bit namesSize field via Get32 at a position that can equal the buffer size, reading 4 bytes past the end of the heap allocation. This reads uninitialized heap data under the default allocator. Version 26.01 patches the issue. |
| On affected platforms running Arista EOS where a tunnel decapsulation configuration—such as VXLAN (Virtual Extensible LAN), decap-groups, or a GRE (Generic Routing Encapsulation) tunnel interface—is present, the switch will incorrectly decapsulate and forward other unexpected tunneled packet with a destination IP matching its configured decapsulation IP. This occurs because the switch does not verify the tunnel protocol type, potentially leading to the unexpected processing of non-configured tunnel traffic.
This issue has been reported as being exploited in the wild. |
| Cloudburst Network provides network components used within Cloudburst projects. A vulnerability in versions prior to `1.0.0.CR3-20260417.085727-30` impacts publicly accessible software depending on the affected versions of Network and allows an attacker to exploit a vulnerability in Network to stall the netty event loop, rendering it inoperable. All consumers of the library should upgrade to at least version `1.0.0.CR3-20260417.085727-30`. There are no known workarounds beyond updating the library. |
| Cloudburst Network provides network components used within Cloudburst projects. A vulnerability in versions prior to `1.0.0.CR3-20260418.124334-32` impacts publicly accessible software depending on the affected versions of Network and allows an attacker to exploit a bug in Network to close the parent netty channel, rendering it inoperable. All consumers of the library should upgrade to at least version `1.0.0.CR3-20260418.124334-32`. There are no known workarounds beyond updating the library. |
| TinyIce is a streaming server for audio and video. In versions 0.8.95 through 2.4.1, missing authentication on WebRTC ingest endpoint allows unauthenticated stream injection. Version 2.5.0 fixes the issue by requiring either HTTP Basic auth or a `?password=` query parameter, comparing the supplied password against the per-mount source password (or the `default_source_password` fallback) using bcrypt, hooking into the existing brute-force IP rate-limiter (5 failed attempts per IP within 15 minutes triggers a lockout), and rejecting requests for mounts in `disabled_mounts`. The same release also tightens an adjacent endpoint, `POST /admin/golive/chunk`, which previously required session authentication but did not verify the session user's per-mount access nor check the CSRF token. |
| On affected platforms with hardware IPSec support running Arista EOS with certain IPsec features enabled, EOS may exhibit unexpected behavior in specific cases. Physical interface flaps and certain agent restarts can cause IPsec tunnel re-establishment with existing Security Associations, resulting in sequence number mismatches between tunnel endpoints potentially causing unstable communication. |
| UDS Identity Config builds the Keycloak configuration image (realm, plugins, theme, truststore, JARs) consumed by UDS Core's Identity deployment. In versions 0.11.0 through 0.26.0, a logic error in the `client-kubernetes-secret` Keycloak client authenticator (shipped by `uds-identity-config` and consumed by UDS Core) causes the submitted `client_secret` to be overwritten with the mounted Kubernetes secret before comparison. An attacker who can reach the Keycloak token endpoint and knows a `client_id` using this authenticator can authenticate as that client with any `client_secret` value and obtain OAuth2 tokens scoped to the client's service account. In the case of the `uds-operator` client this token can be used to registry/modify other clients. Version 0.26.1 patches the issue. |
| HAX CMS helps manage microsite universe with PHP or NodeJs backends. Starting in version 9.0.1 and prior to version 26.0.0 of @haxtheweb/open-apis, multiple functions conduct substring-only matching to validate hostnames to which basic authorization should be sent. An attacker can append the matched substrings to an attacker-controlled endpoint and capture authentication. Version 26.0.0 fixes the issue. |
| HAX CMS helps manage microsite universe with PHP or NodeJs backends. A stored cross-site scripting (XSS) vulnerability exists in versions prior to 26.0.0 due to improper sanitization of `<iframe>` elements. The application allows `javascript:` URIs in the `src` attribute, which are executed when a malicious page is viewed. This enables attackers to execute arbitrary JavaScript in the context of the victim’s browser and access sensitive data exposed to client-side scripts. Version 26.0.0 fixes the issue. |
| HAX CMS helps manage microsite universe with PHP or NodeJs backends. A stored cross-site scripting (XSS) vulnerability exists in versions prior to 26.0.0 due to improper sanitization of the `<video-player>` component. The component allows `javascript:` URIs in the `source` attribute, which are executed when the page is viewed. This enables attackers to execute arbitrary JavaScript in the context of the victim’s browser and access sensitive data such as JWT tokens and more. Version 26.0.0 fixes the issue. |
| A hard-coded cryptographic key is used by Altium Enterprise Server to sign file download URLs in the Vault service. Because the key is identical across all installations, an unauthenticated network attacker who can reach the server can forge valid download signatures and retrieve files from the Vault storage area without any authentication, session, or credentials.
A separate path traversal vulnerability in the same download endpoint allows the configured storage root to be escaped, enabling reads of arbitrary files on the server filesystem. Combined, these issues allow an unauthenticated attacker to obtain sensitive server configuration and key material, which can lead to full server compromise. The vulnerability can be chained with CVE-2026-9152 to enumerate and bulk-download stored content. Altium 365 cloud deployments are not impacted in practice, as file storage uses object storage rather than the local filesystem. |
| HAX CMS helps manage microsite universe with PHP or NodeJs backends. Versions prior to 26.0.0 suffer from an improper session termination vulnerability where authentication tokens remain valid after user logout. This allows attackers who obtain valid tokens to maintain persistent access to authenticated CMS functionality, bypassing the intended session termination mechanism and enabling unauthorized access to CMS metadata and administrative functions. Version 26.0.0 fixes the issue. |
| OpenXDMoD is an open framework for collecting and analyzing HPC metrics. Prior to version 11.0.3, a flaw in Open XDMoD's access control logic allows an attacker to submit a crafted HTTPS POST request that sets a session variable used for authorization decisions. If an installation of Open XDMoD includes the optional Job Performance (SUPReMM) module, an attacker could bypass intended data access restrictions and view other users' compute job efficiency metrics. All deployments of Open XDMoD prior to version 11.0.3 that contain the optional Job Performance (SUPReMM) module are impacted. This issue was reported privately on 2026-04-06, and at this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 11.0.3 on 2026-05-12. As a workaround, apply the patch manually. |
| An encrypted password command injection vulnerability exists in the Captive Portal application framework of Arista Edge Threat Management - Arista Next Generation Firewall (NGFW). This issue uniquely affects version 17.4.0; earlier software releases are not exposed. |
| OpenXDMoD is an open framework for collecting and analyzing HPC metrics. Starting in version 9.5.0 and prior to version 11.0.3, an attacker can remotely execute arbitrary system commands on the web server hosting Open XDMoD with the privileges of the web server process. This could allow an attacker to read or modify application data, alter system configuration, or disrupt service availability. All deployments of Open XDMoD versions 9.5.0 through 11.0.2 (inclusive) are impacted. This issue was reported privately on 2026-04-06, and at this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 11.0.3 on 2026-05-12. As a workaround, apply the patch manually. |
| A Reports application infrastructure vulnerability exists in Arista Edge Threat Management - Arista Next Generation Firewall (NGFW) due to insecure input validation. This issue uniquely affects version 17.4.0; earlier software releases are not exposed. |
