| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FFmpeg versions 4.4 through 8.1.2 contain an out-of-bounds memory access vulnerability in the ADX audio decoder within libavcodec/adxdec.c that allows attackers to trigger both out-of-bounds reads and writes by supplying a crafted ADX or AAX audio file with a mid-stream channel layout change. When AV_PKT_DATA_NEW_EXTRADATA side data is received mid-stream, the adx_decode_frame function re-parses the stream header but fails to update the internal channel state, causing subsequent decoding operations to access the prev[] state array using a stale channel count. |
| IBM OPENBMC FW1110.00 through FW1110.20, and FW1060.00 through FW1060.71 allows ReadOnly users to escalate privileges and give themselves administrator privileges. |
| A Missing Authorization vulnerability in selinux policycoreutils seunshares allows a user that is running in unconfined context to kill e.g. root-owned processes running also in
unconfined context
This issue affects policycoreutils through 3.10. |
| A vulnerability has been found in Linux Kernel up to 5.10.162/5.15.85/6.0.15/6.1.1. The impacted element is the function btf_dump_name_dups of the file tools/lib/bpf/btf_dump.c of the component libbpf. The manipulation leads to use after free. Upgrading to version 5.10.163, 5.15.86, 6.0.16, 6.1.2 and 6.2 is sufficient to resolve this issue. The identifier of the patch is c61650b869e0b6fb0c0a28ed42d928eea969afc8/fbe08093fb2334549859829ef81d42570812597d/8c64a8e76eb85d422af5ec60ccbf26e3ead8c333/a733bf10198eb5bb927890940de8ab457491ed3b/93c660ca40b5d2f7c1b1626e955a8e9fa30e0749. You should upgrade the affected component. |
| A vulnerability was identified in Linux Kernel 33fc42de33278b2b3ec6f3390512987bc29a62b7. This affects the function __mtk_ppe_check_skb of the file drivers/net/ethernet/mediatek/mtk_ppe.c of the component Ethernet Handler. Such manipulation leads to use after free. The name of the patch is 17a5f6a78dc7b8db385de346092d7d9f9dc24df6. It is best practice to apply a patch to resolve this issue. No released Linux Kernel version was ever affected by this CVE. |
| In DOMPurify through 3.3.3, function predicates supplied via ADD_ATTR or ADD_TAGS to DOMPurify.sanitize() persist in internal state (EXTRA_ELEMENT_HANDLING) across subsequent sanitize() calls on the same instance. If a later call on the same instance provides ADD_ATTR or ADD_TAGS as an array rather than a function, the previously set function handler is neither cleared nor overwritten, so it continues to approve attacker-controlled attributes or tags. This can allow dangerous event-handler attributes or forbidden tags (bypassing FORBID_TAGS) to survive sanitization, resulting in cross-site scripting. The vendor (Cure53) considers this an edge case outside DOMPurify's threat model; the referenced advisory lists 3.4.0 as the patched version. |
| A flaw was found in the GNU Binutils (Binary Utilities) linker. This vulnerability, a heap-buffer-overflow read (CWE-125), occurs when the linker processes a specially crafted 32-bit XCOFF (Extended Common Object File Format) object file. An attacker could exploit this by providing a malicious file, leading to an out-of-bounds read of memory. This can result in information disclosure, potentially revealing sensitive heap data, and a Denial of Service (DoS) due to the linker crashing. |
| IBM Sterling B2B Integrator 6.2.0.0 through 6.2.0.6, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.6, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 is vulnerable to stored cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6. Processing a 3D model may result in disclosure of process memory. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: delete tried region in regions_rmdirs()
DAMON sysfs maintains the DAMOS tried region directory objects via a
linked list. When the user requests refresh of the directories, DAMON
sysfs removes all the region directories first, and then generate updated
regions directory on the empty space. The removal function
(damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects.
Deletion of the container region object from the linked list is done
inside the kobj release callback function.
If somehow the callback invocation is delayed, the list will contain
regions list that gonna be freed. If the updated region directories
creation is started in this situation, the list can be corrupted and
use-after-free can happen.
Because the kobj objects are managed by only DAMON sysfs, the issue cannot
happen in normal situation. But, such delays can be made on kernels that
built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can
indeed be reproduced like below.
# damo start --damos_action stat
# cd /sys/kernel/mm/damon/admin/kdamonds/0/
# for i in {1..10}; do echo update_schemes_tried_regions > state; done
# dmesg | grep underflow
[ 89.296152] refcount_t: underflow; use-after-free.
Fix the issue by removing the region object from the list when
decrementing the reference count.
Also update damos_sysfs_populate_region_dir() to add the region object to
the list only after the kobject_init_and_add() is success, so that fail of
kobject_init_and_add() is not leaving the deallocated object on the list.
The issue was discovered [1] by Sashiko. |
| A flaw was found in the cifs-utils package where the cifs.upcall helper fails to securely drop its root privileges before looking up user information inside a user-controlled environment. A local, low privileged attacker can exploit this by using a crafted request_key payload to trick the root-owned helper into entering a custom environment (namespace) containing a malicious NSS module. This forces the system to load the attacker's controlled NSS Module and configuration, allowing them to execute arbitrary commands as the root user, elevating their privileges and fully compromising the system. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject fragmented frames in devmap
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP. |
| Unauthenticated Cross Site Scripting (XSS) in GiveWP <= 4.16.3 versions. |
| React Router is a router for React. Versions 6.0.0 through 7.17.0 are vulnerable to Open Redirtect through use of backslashes in <Link> and useNavigate. This issue is a follow up to CVE-2025-68470 and has been fixed in version 7.18.0. |
| A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. The WICD CSR auto-approver validates that a Certificate Signing Request contains the organization system:wicd-nodes but does not reject additional organization values such as system:masters. A compromised Windows worker node that holds WICD credentials can submit a CSR that is auto-approved and signed by the cluster, yielding a client certificate that grants cluster-administrator privileges and enabling full cluster takeover. |
| A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. WMCO establishes SSH connections to Windows worker nodes without verifying the remote server host key. An adjacent-network attacker who can intercept or redirect WMCO's SSH session can capture WICD and kubelet bootstrap credentials transferred during node configuration, enabling compromise of Windows node identities in the cluster. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host
lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to
__swap_cgroup_id_lookup() without checking that the type was ever
registered via swap_cgroup_swapon(). On a swapless host every ctrl->map
is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled
swp_offset().
Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for
zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls
lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a
real swap entry, without first validating it against swap_info[]. A
single PTE corrupted into a type-0 swap entry takes the host down at
process exit.
We hit this in production on a swapless 6.12.58 host: ~1s of
"get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being
correctly defensive about the same entry) followed by
BUG: unable to handle page fault for address: 000003f800204220
RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60
Call Trace:
swap_pte_batch+0xbf/0x230
zap_pte_range+0x4c8/0x780
unmap_page_range+0x190/0x3e0
exit_mmap+0xd9/0x3c0
do_exit+0x20c/0x4b0
syzbot has reported the identical stack.
The source of the PTE corruption is a separate bug; this change makes the
teardown path as robust as the fault path already is. Every other caller
of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has
already validated the entry, so the new branch is cold. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. If a customer restricts access to the web console by IP address or subnets, the API endpoints are not restricted. If credentials/API keys are known to an attacker, the appliance can still be accessed via the API, leading to a potential compromise of the entire environment that is configured for KACE. |
| Versions of the package sjcl before 1.0.9 are vulnerable to Improper Verification of Cryptographic Signature due to missing point-on-curve validation in sjcl.ecc.basicKey.publicKey(). An attacker can recover a victim's ECDH private key by sending crafted off-curve public keys and observing ECDH outputs. The dhJavaEc() function directly returns the raw x-coordinate of the scalar multiplication result (no hashing), providing a plaintext oracle without requiring any decryption feedback. |
