| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always walk all pending catchall elements
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unconditionally bump set->nelems before insertion
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221 |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Do not over-allocate ftrace memory
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: prevent NPD when writing a positive value to event_done
do_uevent returns the value written to event_done. In case it is a
positive value, new_lockspace would undo all the work, and lockspace
would not be set. __dlm_new_lockspace, however, would treat that
positive value as a success due to commit 8511a2728ab8 ("dlm: fix use
count with multiple joins").
Down the line, device_create_lockspace would pass that NULL lockspace to
dlm_find_lockspace_local, leading to a NULL pointer dereference.
Treating such positive values as successes prevents the problem. Given
this has been broken for so long, this is unlikely to break userspace
expectations. |
| In the Linux kernel, the following vulnerability has been resolved:
net: 9p: fix refcount leak in p9_read_work() error handling
p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid
temporary refcount leak.
[Dominique: commit wording adjustments, p9_req_put argument fixes for rebase] |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: Fix memory leak of nsim_dev->fa_cookie
kmemleak reports this issue:
unreferenced object 0xffff8881bac872d0 (size 8):
comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
hex dump (first 8 bytes):
04 00 00 00 de ad be ef ........
backtrace:
[<00000000c80b8577>] __kmalloc+0x49/0x150
[<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
[<0000000093d78e77>] full_proxy_write+0xf3/0x180
[<000000005a662c16>] vfs_write+0x1c5/0xaf0
[<000000007aabf84a>] ksys_write+0xed/0x1c0
[<000000005f1d2e47>] do_syscall_64+0x3b/0x90
[<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue occurs in the following scenarios:
nsim_dev_trap_fa_cookie_write()
kmalloc() fa_cookie
nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()
The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). |
| A security flaw has been discovered in NousResearch hermes-agent up to 0.15.2. The affected element is the function shell.exec of the file tui_gateway/server.py. The manipulation results in protection mechanism failure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in omec-project amf up to 2.0.2/2.1.1. Impacted is an unknown function of the file /go/src/amf/ngap/handler.go of the component NGSetupRequest Handler. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The identifier of the patch is 34bc6724acc97dba1f8691e586da95b042cb612d. To fix this issue, it is recommended to deploy a patch. |
| A vulnerability was determined in omec-project amf up to 2.1.1. This issue affects the function RRCInactiveTransitionReport of the component NGAP Message Handler. Executing a manipulation can lead to denial of service. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This patch is called 34bc6724acc97dba1f8691e586da95b042cb612d. A patch should be applied to remediate this issue. |
| PHPIPAM is affected by an authenticated local file inclusion vulnerability that allows users with access to the API to execute/include arbitrary PHP files on the web server's file system. The API is not enabled by default on installations. |
| A vulnerability was found in jairiidriss restaurant-website-php-mysql up to 521428b5b612449df0cf4a5d15ee40cba67f3d35. This vulnerability affects unknown code of the file /admin/ajax_files of the component AJAX Endpoint. Performing a manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in FederatedAI FATE up to 2.2.0. This affects the function QueuePushReqStreamObserver.initEggroll of the file java/osx/osx-broker/src/main/java/org/fedai/osx/broker/grpc/QueuePushReqStreamObserver.java of the component OSX Broker. Such manipulation of the argument rollSiteSessionId/dstRole/dstPartyId leads to exposure of data element to wrong session. The attack can be executed remotely. A high complexity level is associated with this attack. It is indicated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. The pull request to fix this issue awaits acceptance. |
| A flaw has been found in itsourcecode Hospital Management System 1.0. Affected by this issue is some unknown functionality of the file /medicine.php. This manipulation of the argument editid causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A vulnerability was detected in Open5GS up to 2.7.7. Affected by this vulnerability is the function amf_nnrf_handle_nf_discover of the file src/amf/nnrf-handler.c of the component AMF. The manipulation results in denial of service. The attack may be launched remotely. The exploit is now public and may be used. The patch is identified as fb5f67703de0213fb9c6e6ef3b48b6c1707e9503. It is best practice to apply a patch to resolve this issue. |
| picklescan before 0.0.28 fails to detect malicious pickle files that use torch.utils.data.datapipes.utils.decoder.basichandlers in reduce methods, allowing attackers to bypass safety checks. Remote attackers can embed undetected malicious code in pickle files that executes during deserialization, enabling remote code execution. |
| Picklescan before 0.0.33 fails to detect the numpy.f2py.crackfortran.getlincoef gadget in pickle __reduce__ methods, allowing arbitrary code execution. Attackers can craft malicious pickle files that execute arbitrary Python code when loaded, bypassing Picklescan's safety checks and enabling supply-chain poisoning of shared model files. |
| In nltk/nltk versions 3.9.3 and earlier, five Stanford interface classes (StanfordPOSTagger, StanfordNERTagger, StanfordParser, StanfordDependencyParser, and StanfordNeuralDependencyParser) are vulnerable to untrusted JAR code execution. These classes accept user-controllable JAR paths and execute them via the `java()` function, which invokes `subprocess.Popen()` without integrity verification. This vulnerability is identical to CVE-2026-0848, which was fixed for StanfordSegmenter by adding SHA256 verification. However, the fix was not applied to these additional classes, leaving them susceptible to arbitrary code execution when loading untrusted JAR files. |
