| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error()
dereferences p->comm and p->pid. If the iterator's reference is the last
drop, the task is freed synchronously and the deref becomes a UAF.
Move put_task_struct() past scx_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init()
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: DEC: Prevent initial console buffer from landing in XKPHYS
In 64-bit configurations calling the initial console output handler from
a kernel thread other than the initial one will result in a situation
where the stack has been placed in the XKPHYS 64-bit memory segment and
consequently so has been the buffer allocated there that is used as the
argument corresponding to the `%s' output conversion specifier for the
firmware's printf() entry point.
This 64-bit address will then be truncated by 32-bit firmware, resulting
in an attempt to access the wrong memory location, which in turn will
cause all kinds of unpredictable behaviour, such as a kernel crash:
Console: colour dummy device 160x64
Calibrating delay loop... 49.36 BogoMIPS (lpj=192512)
pid_max: default: 32768 minimum: 301
CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800
Oops[#1]:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121
$ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0
$ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073
$ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473
$12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000
$16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240
$20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b
$24 : ffffffffffffffbf 000000000203bd00
$28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800
Hi : 0000000000000000
Lo : 0000000000000aa8
epc : ffffffffbfc08364 0xffffffffbfc08364
ra : ffffffffbfc08800 0xffffffffbfc08800
Status: 140120e2 KX SX UX KERNEL EXL
Cause : 00000008 (ExcCode 02)
BadVA : 000000000203bd00
PrId : 00000430 (R4000SC)
Modules linked in:
Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d
80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38
0000000000000000 000000000203bd00 0000000000000000 0000000000000000
0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000002500000000 0000000000000000 0000000000000000 802c1a7400000000
0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172
6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320
806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000
...
Call Trace:
Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8)
>>
In this case the pointer in $4 was truncated from 0x980000000203bd00 to
0x000000000203bd00.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started.
Fix the issue by making the buffer static and initdata, and therefore
placed in the CKSEG0 32-bit compatibility segment, observing that the
console output handler is called with the console lock held, implying
no need for this code to be reentrant. Add an assertion to verify the
buffer actually has been placed in a compatibility segment. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. |
| The User Frontend: AI Powered Frontend Post Submission, User Directory, User Profile, Membership & User Registration WordPress plugin before 4.3.8 does not correctly verify ownership before deleting an attachment, allowing unauthenticated attackers to permanently delete author-less attachments such as guest uploads and User Frontend: AI Powered Frontend Post Submission, User Directory, User Profile, Membership & User Registration WordPress plugin before 4.3.8-installed placeholder media. |
| The FacturaONE para WooCommerce con VeriFactu WordPress plugin before 5.37 does not authenticate one of its request handlers, whose only protection is derived from a cryptographic key that is empty in the default, unconfigured state, allowing unauthenticated attackers to write an arbitrary file into a web-accessible directory and achieve remote code execution. |
| The Contact Form 7 WordPress plugin before 2.5 does not validate the host of a user-supplied return URL before using it as the success and cancel redirect targets of a Stripe checkout, allowing an unauthenticated attacker to redirect a victim, via a crafted link, to an arbitrary external site after the checkout flow. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix moving cancelled entry to ent_in_userspace list
fuse_uring_cancel() moves entries that are available (these have no reqs
attached) to the ent_in_userspace list. ent_list_request_expired()
checks the first entry on ent_in_userspace and dereferences
ent->fuse_req unconditionally, which will crash on a cancelled entry
that was moved to this list.
Fix this by freeing the entry and dropping queue_refs directly in
fuse_uring_cancel(). This is safe because cancel is the cancel handler
itself - after io_uring_cmd_done(), no more cancels will be dispatched
for this command, and teardown serializes with cancel via queue->lock.
Since cancel now decrements queue_refs, fuse_uring_abort() must no
longer gate fuse_uring_abort_end_requests() on queue_refs > 0, as
cancelled entries may have already dropped queue_refs while requests are
still queued. Remove the gate so abort always flushes requests and stops
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req
When fuse_resend() moves a request from fpq->processing back to
fiq->pending, it sets FR_PENDING and clears FR_SENT but does not
remove the requests intr_entry from fiq->interrupts. If the
request had FR_INTERRUPTED set from a prior signal, intr_entry
remains dangling on fiq->interrupts. When the requesting task
then receives a fatal signal, fuse_remove_pending_req() sees
FR_PENDING=1, removes the request from fiq->pending and frees it
via the refcount path, also without cleaning intr_entry. The
stale intr_entry causes use-after-free when fuse_read_interrupt()
iterates fiq->interrupts:
- list_del_init(&req->intr_entry) -> UAF write on freed slab
- req->in.h.unique -> UAF read, data leaked to userspace
Remove intr_entry from fiq->interrupts in fuse_resend() for
interrupted requests before they are placed back on fiq->pending.
Add a WARN_ON if the intr_entry is not empty on request destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: avoid 32-bit prune notification count wrap
FUSE_NOTIFY_PRUNE validates the nodeid payload length with:
size - sizeof(outarg) != outarg.count * sizeof(u64)
On 32-bit kernels, size_t is also 32 bits, so the daemon-controlled
count multiplication can wrap. A prune notification with count
0x20000000 and no nodeid payload passes the check, enters the copy
loop, and asks the device copy path to read nodeids that are not
present in the userspace write buffer. In QEMU this reaches the
fuse_copy_fill() BUG_ON(!err) path.
Validate the payload length with array_size() instead. That accepts
exactly the same valid messages, but avoids wrapping arithmetic before
the copy loop consumes the count. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - reject an oversized device packet size
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter deregistration race
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exits
Move the handling of fastpath userspace exits into vendor code to ensure
KVM runs vendor specific operations that need to run before userspace gains
control of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVM
needs to flush the PML buffer prior to exiting to userspace, otherwise any
memory written by the final KVM_RUN might never be flagged as dirty.
Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed in
general, as that risks consuming stale state in a fastpath handler. That
will be addressed in a future change. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU
on every run. The vGIC list register save and restore use used_lrs as
their loop bound and expect it to stay within the number of implemented
list registers. While this is generally the case, flush_hyp_vcpu()
copies vgic_v3 verbatim and does not enforce this, so a value provided
by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2
(host -> EL2).
Fix by clamping used_lrs to the number of implemented list registers
after the copy, as the trusted path already does in
vgic_flush_lr_state(). The number of implemented list registers is
constant after init, so it is replicated once from
kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on
every entry. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Avoid dereferencing NULL VNCR pseudo-TLB
VNCR TLB invalidation occurs from MMU notifiers or TLBI instructions,
and either can race against a vcpu not being onlined yet (no pseudo-TLB
allocated). Similarly, the TLB might be invalid, and the invalidation
should be skipped in this case.
Both kvm_invalidate_vncr_ipa() and kvm_invalidate_vncr_va() are
expected to perform the same checks, except that the latter doesn't
check for the allocation and blindly dereferences the pointer.
Solve this by introducing a new iterator built on top of the usual
kvm_for_each_vcpu() that checks for both of the above conditions,
and convert the two users to it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Set veventq_depth upper bound
iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with
an upper bound at U32_MAX.
This leaves a vulnerability where userspace can allocate excessively large
queues to exhaust kernel memory reserves.
Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the
maximum number of entries in the SMMUv3 EVTQ (the largest use case today). |
| In the Linux kernel, the following vulnerability has been resolved:
mm: page_ext: add count limit to page_ext_iter_next to prevent invalid PFN access
The page_ext iteration API does not validate if the PFN still belongs to a
valid section while advancing the iterator. When dynamically adding
memory in the hotplug path, it can lead to a NULL pointer dereference
during page_ext_lookup at the boundary of the last valid section when
iterator count equals __pgcount.
The for_each_page_ext() macro calls page_ext_iter_next() as its loop
increment. for_each_page_ext() does a "__page_ext =
page_ext_iter_next(&__iter)" at the end. This causes page_ext_iter_next()
to increment iter->index past __pgcount and call page_ext_lookup(start_pfn
+ __pgcount). During memory hotplug (online), the PFN at start_pfn +
__pgcount may belong to a section that has not yet been initialized,
causing page_ext_lookup() to trigger a NULL pointer dereference.
[ 14.555124][ T846] Call trace:
[ 14.555125][ T846] lookup_page_ext+0x6c/0x108 (P)
[ 14.555127][ T846] page_ext_lookup+0x30/0x3c
[ 14.555129][ T846] __reset_page_owner+0x11c/0x260
[ 14.571201][ T846] __free_pages_ok+0x5e8/0x8e0
[ 14.571204][ T846] __free_pages_core+0x78/0xf0
[ 14.571206][ T846] generic_online_page+0x14/0x24
[ 14.597782][ T846] online_pages+0x178/0x30c
[ 14.597784][ T846] memory_block_change_state+0x284/0x32c
[ 14.597787][ T846] memory_subsys_online+0x4c/0x64
[ 14.597789][ T846] device_online+0x88/0xb0
[ 14.597791][ T846] online_memory_block+0x30/0x40
[ 14.597793][ T846] walk_memory_blocks+0xac/0xe8
[ 14.597794][ T846] add_memory_resource+0x280/0x298
[ 14.656161][ T846] add_memory+0x60/0x98
Move the iteration boundary enforcement inside the iterator functions, so
callers cannot inadvertently access beyond the requested range. |
| In the Linux kernel, the following vulnerability has been resolved:
module: decompress: check return value of module_extend_max_pages()
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
[Sami: Corrected the analysis in the commit message.] |
