| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, an off-by-one check in IsoMux certificate filename handling causes a stack-based buffer overflow when a filename length equals `MAX_FILE_NAME_LENGTH` (100). A crafted filename in the certificate directory can overflow `file_names[idx]`, corrupting stack state and enabling potential code execution. Version 2026.02.0 contains a patch. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, `HomeplugMessage::setup_payload` trusts `len` after an `assert`; in release builds the check is removed, so oversized SLAC payloads are `memcpy`'d into a ~1497-byte stack buffer, corrupting the stack and enabling remote code execution from network-provided frames. Version 2026.02.0 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| The Complianz – GDPR/CCPA Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 7.4.4.2. This is due to the `revert_divs_to_summary` function replacing `”` HTML entities with literal double-quote characters (`"`) in post content without subsequent sanitization. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the injected page. The Classic Editor plugin is required to be installed and activated in order to exploit this vulnerability. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, stack-based buffer overflow in CAN interface initialization: passing an interface name longer than IFNAMSIZ (16) to CAN open routines overflows `ifreq.ifr_name`, corrupting adjacent stack data and enabling potential code execution. A malicious or misconfigured interface name can trigger this before any privilege checks. Version 2026.02.0 contains a patch. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have an out-of-bounds access (std::vector) that leads to possible remote crash/memory corruption. This is because the CSMS sends UpdateAllowedEnergyTransferModes over the network. Version 2026.2.0 contains a patch. |
| EVerest is an EV charging software stack. Prior to versions to 2026.02.0, ISO15118_chargerImpl::handle_session_setup copies a variable-length payment_options list into a fixed-size array of length 2 without bounds checking. With schema validation disabled by default, oversized MQTT Cmd payloads can trigger out-of-bounds writes and corrupt adjacent EVSE state or crash the process. Version 2026.02.0 contains a patch. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, ISO15118_chargerImpl::handle_session_setup uses v2g_ctx after it has been freed when ISO15118 initialization fails (e.g., no IPv6 link-local address). The EVSE process can be crashed remotely by an attacker with MQTT access who issues a session_setup command while v2g_ctx has been released. Version 2026.02.0 contains a patch. |
| Cross Site Scripting (xss) vulnerability in Timo 2.0.3 via crafted links in the title field. |
| Firecrawl version 2.8.0 and prior contain a server-side request forgery (SSRF) protection bypass vulnerability in the Playwright scraping service where network policy validation is applied only to the initial user-supplied URL and not to subsequent redirect destinations. Attackers can supply an externally valid URL that passes validation and returns an HTTP redirect to an internal or restricted resource, allowing the browser to follow the redirect and fetch the final destination without revalidation, thereby gaining access to internal network services and sensitive endpoints. This issue is distinct from CVE-2024-56800, which describes redirect-based SSRF generally. This vulnerability specifically arises from a post-redirect enforcement gap in implemented SSRF protections, where validation is applied only to the initial request and not to the final redirected destination. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, even immediately after CSMS performs a RemoteStop (StopTransaction), the EVSE can return to `PrepareCharging` via the EV's BCB toggle, allowing session restart. This breaks the irreversibility of remote stop and can bypass operational/billing/safety controls. Version 2026.02.0 contains a patch. |
| H3 is a minimal H(TTP) framework. In versions 2.0.0-0 through 2.0.1-rc.16, the `mount()` method in h3 uses a simple `startsWith()` check to determine whether incoming requests fall under a mounted sub-application's path prefix. Because this check does not verify a path segment boundary (i.e., that the next character after the base is `/` or end-of-string), middleware registered on a mount like `/admin` will also execute for unrelated routes such as `/admin-public`, `/administrator`, or `/adminstuff`. This allows an attacker to trigger context-setting middleware on paths it was never intended to cover, potentially polluting request context with unintended privilege flags. Version 2.0.2-rc.17 contains a patch. |
| ORY Oathkeeper is an Identity & Access Proxy (IAP) and Access Control Decision API that authorizes HTTP requests based on sets of Access Rules. Versions prior to 26.2.0 are vulnerable to authentication bypass due to cache key confusion. The `oauth2_introspection` authenticator cache does not distinguish tokens that were validated with different introspection URLs. An attacker can therefore legitimately use a token to prime the cache, and subsequently use the same token for rules that use a different introspection server. Ory Oathkeeper has to be configured with multiple `oauth2_introspection` authenticator servers, each accepting different tokens. The authenticators also must be configured to use caching. An attacker has to have a way to gain a valid token for one of the configured introspection servers. Starting in version 26.2.0, Ory Oathkeeper includes the introspection server URL in the cache key, preventing confusion of tokens. Update to the patched version of Ory Oathkeeper. If that is not immediately possible, disable caching for `oauth2_introspection` authenticators. |
| Ory Hydra is an OAuth 2.0 Server and OpenID Connect Provider. Prior to version 26.2.0, the listOAuth2Clients, listOAuth2ConsentSessions, and listTrustedOAuth2JwtGrantIssuers Admin APIs in Ory Hydra are vulnerable to SQL injection due to flaws in its pagination implementation. Pagination tokens are encrypted using the secret configured in `secrets.pagination`. If this value is not set, Hydra falls back to using `secrets.system`. An attacker who knows this secret can craft their own tokens, including malicious tokens that lead to SQL injection. This issue can be exploited when one or more admin APIs listed above are directly or indirectly accessible to the attacker; the attacker can pass a raw pagination token to the affected API; and the configuration value `secrets.pagination` is set and known to the attacker, or `secrets.pagination` is not set and `secrets.system` is known to the attacker. An attacker can execute arbitrary SQL queries through forged pagination tokens. As a first line of defense, immediately configure a custom value for `secrets.pagination` by generating a cryptographically secure random secret. Next, upgrade Hydra to the fixed version, 26.2.0 as soon as possible. |
| PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.7.7` through `v0.8.4` contain incomplete request-throttling protections for auth-checkable endpoints. In `v0.7.7` through `v0.8.3`, a fully implemented `RateLimitMiddleware` existed in `internal/handlers/middleware.go` but was not inserted into the production HTTP handler chain, so requests were not subject to the intended per-IP throttle. In the same pre-`v0.8.4` range, the original limiter also keyed clients using `X-Forwarded-For`, which would have allowed client-controlled header spoofing if the middleware had been enabled. `v0.8.4` addressed those two issues by wiring the limiter into the live handler chain and switching the key to the immediate peer IP, but it still exempted `/health` and `/metrics` from rate limiting even though `/health` remained an auth-checkable endpoint when a token was configured. This issue weakens defense in depth for deployments where an attacker can reach the API, especially if a weak human-chosen token is used. It is not a direct authentication bypass or token disclosure issue by itself. PinchTab is documented as local-first by default and uses `127.0.0.1` plus a generated random token in the recommended setup. PinchTab's default deployment model is a local-first, user-controlled environment between the user and their agents; wider exposure is an intentional operator choice. This lowers practical risk in the default configuration, even though it does not by itself change the intrinsic base characteristics of the bug. This was fully addressed in `v0.8.5` by applying `RateLimitMiddleware` in the production handler chain, deriving the client address from the immediate peer IP instead of trusting forwarded headers by default, and removing the `/health` and `/metrics` exemption so auth-checkable endpoints are throttled as well. |
| iCalendar is a Ruby library for dealing with iCalendar files in the iCalendar format defined by RFC-5545. Starting in version 2.0.0 and prior to version 2.12.2, .ics serialization does not properly sanitize URI property values, enabling ICS injection through attacker-controlled input, adding arbitrary calendar lines to the output. `Icalendar::Values::Uri` falls back to the raw input string when `URI.parse` fails and later serializes it with `value.to_s` without removing or escaping `\r` or `\n` characters. That value is embedded directly into the final ICS line by the normal serializer, so a payload containing CRLF can terminate the original property and create a new ICS property or component. (It looks like you can inject via url, source, image, organizer, attach, attendee, conference, tzurl because of this). Applications that generate `.ics` files from partially untrusted metadata are impacted. As a result, downstream calendar clients or importers may process attacker-supplied content as if it were legitimate event data, such as added attendees, modified URLs, alarms, or other calendar fields. Version 2.12.2 contains a patch for the issue. |
| Picomatch is a glob matcher written JavaScript. Versions prior to 4.0.4, 3.0.2, and 2.3.2 are vulnerable to Regular Expression Denial of Service (ReDoS) when processing crafted extglob patterns. Certain patterns using extglob quantifiers such as `+()` and `*()`, especially when combined with overlapping alternatives or nested extglobs, are compiled into regular expressions that can exhibit catastrophic backtracking on non-matching input. Applications are impacted when they allow untrusted users to supply glob patterns that are passed to `picomatch` for compilation or matching. In those cases, an attacker can cause excessive CPU consumption and block the Node.js event loop, resulting in a denial of service. Applications that only use trusted, developer-controlled glob patterns are much less likely to be exposed in a security-relevant way. This issue is fixed in picomatch 4.0.4, 3.0.2 and 2.3.2. Users should upgrade to one of these versions or later, depending on their supported release line. If upgrading is not immediately possible, avoid passing untrusted glob patterns to `picomatch`. Possible mitigations include disabling extglob support for untrusted patterns by using `noextglob: true`, rejecting or sanitizing patterns containing nested extglobs or extglob quantifiers such as `+()` and `*()`, enforcing strict allowlists for accepted pattern syntax, running matching in an isolated worker or separate process with time and resource limits, and applying application-level request throttling and input validation for any endpoint that accepts glob patterns. |
| PrestaShop is an open source e-commerce web application. Versions prior to 8.2.5 and 9.1.0 are vulnerable to stored Cross-Site Scripting (stored XSS) vulnerabilities in the BO. An attacker who can inject data into the database, via limited back-office access or a previously existing vulnerability, can exploit unprotected variables in back-office templates. Versions 8.2.5 and 9.1.0 contain a fix. No known workarounds are available. |
