| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected. |
| The PKCS#7 decode path ignores the caller-supplied output buffer size (outputSz), allowing decoded content to be written past the bounds of the provided buffer. This affects wolfSSL 5.9.0 and earlier and was fixed in the 5.9.1 release. |
| A heap buffer overflow could occur in the DTLS 1.3 ACK serialization path before the connecting peer is authenticated. The buffer overflow was due to an integer truncation when computing the length of the ACK record-number list, causing an undersized buffer to be allocated and then overrun. This affects builds using DTLS 1.3 and wolfSSL version 5.9.0 and earlier. A fix was added to the 5.9.1 release. |
| Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer. |
| In EmberZNet v9.0.2 and earlier, malformed IAS Zone enrollment messages can trigger an out-of-bounds state-table write and terminate the process. The size and location of this write is limited. These messages must come from a device that has already joined the network. Only devices supporting the IAS Zone cluster may be impacted. |
| In EmberZNet v9.0.2 and earlier, malformed ClearWeekdaySchedule messages can trigger out-of-bounds writes into Door Lock schedule state. The size and location of this data is limited. These messages must come from a device that has already joined the network. Only devices supporting the Door Lock cluster may be impacted. |
| List::SomeUtils::XS versions before 0.59 for Perl have a heap buffer overflow in the pairwise function.
pairwise() collects the values returned by the block into a heap buffer sized to the longer input array, then grows the buffer before each copy with a single quadrupling (alloc <<= 2) instead of a loop. A block call that returns more than four times the current allocation in one invocation outgrows that one quadrupling, and the copy writes past the end of the buffer.
Any caller of pairwise() whose block returns, for a single pair, more than four times the longer input array's length writes past the buffer and corrupts the heap. |
| RTKLIB through 2.4.3 contains an out-of-bounds write vulnerability in decode_type1033 function that fails to clamp length counters to destination buffer size, allowing up to 191-byte overflow into fixed 64-byte descriptor fields. An attacker controlling an NTRIP or serial RTCM3 correction stream can craft a valid CRC-bearing type-1033 message to corrupt adjacent rtcm_t object members, potentially achieving arbitrary code execution or denial of service. |
| snes9x 1.63 allows an out-of-bounds write and denial of service via a crafted .ups file. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Clamp XDomain response data copy to allocation size
tb_xdp_properties_request() derives the per-packet copy length from
the response header without checking that it fits in the previously
allocated data buffer. A malicious peer can set its length field
larger than the declared data_length, causing memcpy to write past
the kcalloc allocation.
Clamp the per-packet copy length so that the cumulative offset
never exceeds data_len. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data. |
| Vim is an open source, command line text editor. Prior to 9.2.0698, the single-byte branch of spell_soundfold_sofo() in src/spell.c translates a word through a spell file's SOFO (sound-folding) byte map into a caller-owned result buffer. Its copy loop advances the output index ri with no upper bound and terminates only on the input NUL, writing one byte per input byte into the MAXWLEN-element stack buffer the caller provides. A word longer than MAXWLEN, passed to soundfold() (or reached via sound-based spell suggestion) while a SOFO-based spell language is active, therefore writes past the end of that buffer. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0698. |
| jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds check for firmware runtime memory
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs
[Why & How]
dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc
without checking for NULL. A connector can be connected but not bound to
any CRTC (e.g. after hot-plug before the next atomic commit), causing a
kernel crash when writing to the sdp_message debugfs node.
The function also ignores the user-provided size argument and always
passes 36 bytes to copy_from_user(), reading past the user buffer when
size < 36.
Fix both issues by:
- Returning -ENODEV when connector->base.state or state->crtc is NULL
- Clamping write_size to min(size, sizeof(data))
(cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| If NSD is configured as secondary for a zone, the primary of that zone can crash NSD with an AXFR containing a DNS message with a special crafted SVCB RR with an rdata size of 65512, that let's an (uint16_t) variable that is used to allocate space needed for the RR wrap (because total size > 65535), causing a heap overflow. The attacker can perform a controlled (RCE class) head write of up to 65509 bytes |
| NSD version 4.14.0 introduced a bug where a specially crafted APL RR, with an adflength larger than permitted for the address family will overwrite the stack when the zone is written to disk, with a maximum of 111 attacker controlled bytes. |
| Out of bounds read and write in Blink>InterestGroups in Google Chrome prior to 149.0.7827.197 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| In WC-Radio, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
