| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Aida64 Engineer 6.10.5200 contains a buffer overflow vulnerability in the CSV logging configuration that allows attackers to execute malicious code by crafting a specially designed payload. Attackers can exploit the vulnerability by creating a malformed log file with carefully constructed SEH (Structured Exception Handler) overwrite techniques to achieve remote code execution. |
| Cryptomator encrypts data being stored on cloud infrastructure. Prior to version 1.19.1, the Hub-based unlock flow explicitly supports hub+http and consumes Hub endpoints from vault metadata without enforcing HTTPS. As a result, a vault configuration can drive OAuth and key-loading traffic over plaintext HTTP or other insecure endpoint combinations. An active network attacker can tamper with or observe this traffic. Even when the vault key is encrypted for the device, bearer tokens and endpoint-level trust decisions are still exposed to downgrade and interception. This issue has been patched in version 1.19.1. |
| langflow <=1.0.18 is vulnerable to Remote Code Execution (RCE) as any component provided the code functionality and the components run on the local machine rather than in a sandbox. |
| langflow v1.0.12 was discovered to contain a remote code execution (RCE) vulnerability via the PythonCodeTool component. |
| Langflow versions prior to 1.0.13 suffer from a Privilege Escalation vulnerability, allowing a remote and low privileged attacker to gain super admin privileges by performing a mass assignment request on the '/api/v1/users' endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: only call xf{array,blob}_destroy if we have a valid pointer
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable exception fixup for specific ADE subcode
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix outer network offset
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unprivileged local user can do privileged policy management
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| Precurio Intranet Portal 4.4 contains a cross-site request forgery vulnerability that allows attackers to induce authenticated users to submit crafted requests to a profile update endpoint handling file uploads. Attackers can exploit this to upload executable files to web-accessible locations, leading to arbitrary code execution in the context of the web server. |
| In N2W before 4.3.2 and 4.4.0 before 4.4.1, improper validation of API request parameters enables remote code execution. |
| In N2W before 4.3.2 and 4.4.x before 4.4.1, there is potential remote code execution and account credentials theft because of a spoofing vulnerability. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Tahoe 26.4. An app may bypass Gatekeeper checks. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.4, macOS Sonoma 14.8.5, macOS Tahoe 26.3, macOS Tahoe 26.4. An app may be able to access user-sensitive data. |
